User Documentation

IE-CS(T)-2TX-xRS232/485 IP Serial LIB
6-7
Lock Fixed
The IE-CS(T)-2TX-xRS232/485 is password protected, “Specify by IP address” was used to locate it, and the
password has not yet been entered from within the current Administrator session.
Unlock Fixed
The IE-CS(T)-2TX-xRS232/485 is password protected, “Specify by IP address” was used to locate it, and the
password has been entered from within the current Administrator session. Henceforth during this
Administrator session, activating various utilities for this IE-CS(T)-2TX-xRS232/485 will not require
re-entering the server password.
Configuring the IE-CS(T)-2TX-xRS232/485
In this section, we illustrate how to access the IE-CS(T)-2TX-xRS232/485’s configuration utility. You should
first make sure that you can connect over the network from your computer to the IE-CS(T)-2TX-xRS232/485.
1. To start S/E-Converter Administrator,click Start  Programs -> Weidmüller SE-Converter
Administration  S/E-Converter Administrator.
2. Unlock the IE-CS(T)-2TX-xRS232/485 you wish to configure if it is password protected. Right click the
IE-CS(T)-2TX-xRS232/485 and select Configure to start the configuration.
3. The progress bar shows that Administrator is retrieving configuration information from the specific
IE-CS(T)-2TX-xRS232/485.
4. Refer to Chapter 5 for each parameter’s function definition. To modify the configuration, you must first click
in the modify box to activate the parameter setting box.