User Documentation

2053260000/05/2015102
Installation
3.3 Cable routing
Use the following information and assistance to simplify your work and to ensure
that your system runs smoothly later on.
Please notice the strain relief specications according to
applicable standards.
Unrolling cable
With cable drums, use unwind stands to avoid harmful loading.
Unreel the cable rings on the oor to avoid torsion forces on the cable.
Bending radius
Always note the manufacturer's details on bending radii for cables.
These must be observed to ensure the transfer characteristics.
• Typical bending radii are:
• Copper installation cable: 4-5 x diameter
• Flexible copper connection cable: 4-5 x diameter
(one-off bending), 8-10 x diameter (frequent
bending)
• Copper dragline cable: approx. 7.5 x diameter
When guiding cables around sharp edges or corners, be sure not to
damage them in order to maintain durability and transfer properties.