Industrial Ethernet Let’s connect.
Active components Contents Industrial Ethernet Solutions for industrial data communications A Introduction – Active components B Industrial Ethernet Switches C Industrial Security Router / u-link Remote Access Service D Media converter and protocol gateways E Industrial WLAN F Accessories – Active components Passive components G Introduction – Passive components H IP20 plug-in connectors and mounting rail outlets I IP65 service interface FrontCom® J IP67 plug-in connectors K IP65 con
Product overview Active components An overview of our portfolio II Unmanaged Switches Fast Ethernet Page B.3 Unmanaged Switches Gigabit Ethernet Page B.6 Managed Switches Fast Ethernet Page B.13 Managed Switches Fast/Gigabit Ethernet Page B.16 Power-over-Ethernet-Switches Page B.20 Industrial Security Router Page C.6 u-link Remote Access Service Page C.13 Media converter (copper/fibre-optic) Page D.3 Serial/Ethernet converter Page D.5 Serial/fibre-optic converter Page D.
Product overview Active components Accessories from a single source SFP-Transceiver (Fast Ethernet/Gigabit Ethernet) Page F.2 2596860000 Module for saving and loading a device configuration Page F.3 Mounting kits for 19“ rack, wall, DIN rail Page F.
Product overview Passive components An overview of our portfolio IV PROFINET and SERCOS III cabling solutions Page G.10 EtherNet/IP cabling solutions Page G.14 IP20 plug-in connectors Page H.2 IP20 mounting rail outlets Page H.11 IP65 service interface FrontCom® Page I.2 IP67 plug-in connectors Page J.2 IP65 connection components / connectivity components FreeCon Page K.2 IP65 FreeCon Active PROFINET Page K.9 IP65 Contactless Power Transmission FreeCon Contactless Power Page K.
Product overview Cabling solutions An overview of our portfolio Installation cables Page L.6 Connecting cables Page L.8 Dragline cables Page L.13 RJ45 patch cables Page L.17 System cables assembled Page L.27 FO connecting cables Page M.5 FO patch cables Page M.7 FO system cables Page M.
Product overview Passive components Accessories from a single source VI Cable connector Page N.3 Tools Copper cabling Page N.4 Tools Fibre-optic cabling Page N.10 General tools Page N.16 Cabtite® Page N.17 Protective caps Page N.20 Inkjet printer Page N.21 Markers Page N.
2596860000 VII
Intended use for Industrial Ethernet Intended use for Industrial Ethernet A complete range of products for industrial communications infrastructure RJ45 plug-in connector Mounting rail outlets V14 plug-in connector Security Router Router WLAN Access Points Service interfaces RJ45 patch cable M12 X-coded The trend to network industrial plant components using Ethernet protocols was already apparent several years ago.
Intended use for Industrial Ethernet Automotive Robust and secure from the control layer to the robot Car manufacturers in AIDA (the German car manufacturers’ automation initiative) are the driver behind the use of Industrial Ethernet in the manufacturing sector, as they clearly prefer the use of PROFINET for communication between machines and equipment parts.
Intended use for Industrial Ethernet General machine construction High-performance solutions, simply integrated Important aspects of communications in machinery and device construction are networking machine segments and device parts and connecting them to the higher-level office network. Many serial devices are connected to the Ethernet infrastructure to protect investments and because of the various different communication protocols in use.
Intended use for Industrial Ethernet Machinery - in detail Your robots are always in action We enable them to let you know what they are up to You require a seamless flow of information to optimise the output and efficiency of your production cells – from networking the communication between machine segments, to the exchange of information with higher-level office networks. In this way you can constantly monitor the activities of your robots.
Intended use for Industrial Ethernet XII Plug-in connectors and cabling system Active Industrial Ethernet components • IEC-standardised connector, in variants 1, 4, 5 , 6 and 14 • All in Cat.
Intended use for Industrial Ethernet For use in the process industry Optimized for use in hazardous areas Weidmüller’s network components for the process industry allow their use in explosion hazard areas with their certification - Class 1 Div. 2 and ATEX. The active components have high fault-tolerance and ensure high system availability with redundancy mechanisms like trunking and ring-redundancy as well as RSTP. Long distances can be bridged using fibre-optic media in large process plants.
Intended use for Industrial Ethernet Use in the shipbuilding industry Extremely reliable in harsh environments While autonomous navigation is gaining importance in shipping, the comfort requirements of crew and passengers are increasing too. Therefore, ships are equipped with increasingly more complex network solutions which need to be managed intelligently.
Intended use for Industrial Ethernet Digitalisation and security High speed with perfect protection Weidmüller‘s Industrial Ethernet portfolio supports you both in the implementation of classic industrial applications and in communication from the sensor to the cloud. Weidmüller‘s u-link Remote Access Service enables worldwide access to systems with Weidmüller Industrial Security Routers via the u-link portal.
XVI 2596860000
Introduction – Active components Contents Active components Introduction Introduction – Active components 2596860000 Introduction – Active components A.2 Switches – quick-finder A.6 A A.
Introduction – Active components Introduction – Active components A Active components Solutions for global industrial use Ethernet technology is an established standard in office communication and has existed for many years. Without it, effective communications between equipment such as PCs, printers, data servers, etc. would not be possible. In recent years this technology has been expanded under the term Industrial Ethernet and implemented in automation systems.
Introduction – Active components Introduction – Active components Suitable for use in extreme temperature environments Outstanding immunity to electromagnetic interference Industrial environments often experience extreme temperature conditions. This means that devices are needed which can operate flawlessly with the vast temperature fluctuations. All of our Industrial Ethernet components undergo a burn-in test over several hours to ensure they function properly at the guaranteed temperature ranges (e.g.
Introduction – Active components Introduction – Active components A The ideal solution, whatever your needs Our Basic, Value and Premium Line product ranges Basic Line  A.4 Value Line  Weidmüller’s Basic Line series consists of unmanaged Plug & Play switches in a rugged IP30 rated aluminium housing. The devices are available with Fast Ethernet and Gigabit Ethernet and provide an economical solution for Industrial Ethernet networks.
Introduction – Active components Introduction – Active components Premium Line Industrial Security Routers   Weidmüller’s Premium Line series completes the switch range for the high-end sector and is particularly suitable for complex network solutions with high traffic levels. The devices are available in different versions, ie. number of ports, transmission rate (Fast and Gigabit Ethernet) and the Typee of connection (copper and fibre-optic).
Introduction – Active components Switches – quick-finder 5 Ports total Ports RJ-45: 10/100Mbit 5 4 Ports RJ-45: 10/100/1000Mbit up to 5 3 1 4 1 Ports SC/ST-LWL: 100Mbit Ports SFP-LC: 100/1000Mbit 1504410000 up to 1 1240840000 1240850000 2435400000 2435410000 1504320000 1504340000 1504360000 1504380000 1240870000 1286530000 1240880000 1286540000 1240890000 1286550000 1241380000 1286920000 1504210000 1504220000 1504230000 1504240000 1504250000 1504260000 1504270000 1504290
up to 2 b) 1 6 9 7 up to 9 c) up to 5 b) 3 10 7 2596860000 16 14 1 3 18 16 up to 2 d) 2 2 ● ● ● 16 14 up to 2 d) 2 up to 2 d) Layer 2 - Managed up to 8 a) 7 Layer 2 - Unmanaged 8 Introduction – Active components Switches – quick-finder A up to 2 d) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Temperature Fibre-optic interface Page -25 … +60 °C - B.
Introduction – Active components Switches – quick-finder 5 Ports total Ports RJ-45: 10/100Mbit 5 4 up to 5 Ports RJ-45: 10/100/1000Mbit 3 e) 1 4 Ports RJ-45: 10/100/1000Mbit (PoE+) 5 6 3 2 8 4 4 1 2 4 5 Ports M12: 10/100Mbit 1 Ports SC/ST-LWL: 100Mbit up to 1 Ports SFP-LC: 100/1000Mbit 2 b) 1 Ports SFP-LC: 1000Mbit Order No.
1 9 7 up to 9 c) up to 5 b) 3 10 7 16 16 14 1 up to 2 3 18 16 d) 2 14 up to 2 d) 2 up to 2 d) 2 Introduction – Active components up to 2 b) 6 Layer 2 - Managed up to 8 a) 7 Layer 2 - Unmanaged 8 A up to 2 d) Temperature ● ● ● ● ● 2596860000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● -40 … +75 °C -10 … +60 °C -40 … +75 °C -10 … +60 °C -40 … +75 °C -10 … +60 °C -40 … +75 °C -10 … +60 °C -40 … +75 °C -40 … +75 °C -10 … +60 °C -40 … +75 °C -10 … +60 °C -40 … +75 °C -
Introduction – Active components Switches – quick-finder 5 Ports total Ports RJ-45: 10/100Mbit 5 4 up to 5 Ports RJ-45: 10/100/1000Mbit 3 e) 1 4 Ports RJ-45: 10/100/1000Mbit (PoE+) Ports SFP-LC: 100/1000Mbit 1 1286810000 1286820000 1241120000 1286830000 1241130000 1286840000 1241290000 1286930000 1241300000 1286940000 1241320000 1286970000 1241330000 1286990000 1241340000 1287000000 1241350000 1287010000 1241370000 1287020000 3 2 8 4 4 1 2 4 up to 1 2 Type Indust
1 9 7 up to 9 c) up to 5 b) 3 10 7 16 16 14 1 up to 2 3 d) 2 ● ● ● ● ● ● ● ● 14 up to 2 d) 2 up to 2 d) 2 2596860000 18 16 A up to 2 d) ● ● ● ● ● ● Introduction – Active components up to 2 b) 6 Layer 2 - Managed up to 8 a) 7 Layer 2 - Unmanaged 8 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Temperature Fibre-optic interface Page -40 … +75 °C SC-Singlemode B.
A A.
Industrial Ethernet Switches Contents Industrial Ethernet Switches Overview Industrial Ethernet Switches 2596860000 Unmanaged Switches B.2 Unmanaged Switches Fast Ethernet B.3 Unmanaged Switches Gigabit Ethernet B.6 Managed Switches introduction B.8 Managed Switches Fast Ethernet B.13 Managed Switches Fast/Gigabit Ethernet B.16 Managed Switches Gigabit Ethernet B.18 Power over Ethernet Switches B.19 Unmanaged Switches Fast Ethernet - Power over Ethernet B.
Industrial Ethernet Switches Unmanaged Switches Unmanaged Switches Adaptable and universal Switches are the basic coupling elements in Ethernet networks. They connect the Ethernet participants together. In an Ethernet network the communication basically originates from the participants. The switches connect the participants together and enable the communication. Unmanaged switches are the simplest active network component. They do not need to be configured and are therefore very flexible.
Industrial Ethernet Switches Unmanaged Switches Fast Ethernet – Basic Line 5 and 8-Port unmanaged Fast Ethernet Switches • Two redundant voltage inputs 12/24/48 V DC (9.6 to 60 V DC) • IP30 aluminium housing • Rugged hardware design well suited for hazardous locations (Class I Div.
Industrial Ethernet Switches Unmanaged Switches Fast Ethernet – Value Line 9 and 16-Port unmanaged Fast Ethernet Switches • Two redundant voltage inputs 12/24/48 V DC (9.
Industrial Ethernet Switches Unmanaged Switches Fast Ethernet – Value Line 5-Port IP67 unmanaged Fast Ethernet Switches • M12 connection system and IP67 protected housing • 10/100BaseT (X), 4-pin M12 (D-coded) • Full/half duplex mode and auto MDI/MDI-X • Input voltage 12 to 45 V DC, 18 to 30 V AC 27.6 mm 60 mm B 107 mm 125 mm 21 mm 36 mm \% 29.
5 and 8-Port unmanaged Gigabit Ethernet Switches • Gigabit Ethernet on all ports • Variants with slots for SFP transceivers • Redundant dual 12/24/48 V DC power inputs • Relay output warning for power failure and port break alarm • Broadcast storm protection • Supports jumbo frame transmission IE-SW-VL08-Serie Industrial Ethernet Switches Unmanaged Switches Gigabit Ethernet – Basic/Value Line B IE-SW-BL05-Serie T Technical data Technology S
B 2596860000 B.
Industrial Ethernet Switches Managed Switches introduction Managed Switches Configurable according to requirements Managed switches offer extensive control mechanisms for data distribution and bandwidth management to co-ordinate and cope with the different requirements of communication participants in an industrial network. Configuration is either web-based using a simple and intuitive user interface or via a serial console. B B.
Industrial Ethernet Switches Managed Switches introduction Ring redundancy The Turbo-Ring technology integrated into Weidmüller’s switches allows you to restore a network connection in case of failure in under 20 ms, and this with up to 250 switches in a ring. Turbo-Ring offers thee different topology options (Ring-Coupling, Dual-Ring and Dual-Homing) for different application requirements to ensure the maximum possible availability of industrial network applications. B 7XUER 5LQJ UHFRYHU\ WLPH PV
Industrial Ethernet Switches Managed Switches introduction Dual-Ring B In a Dual-Ring, two neighbouring rings are connected with one another using one switch, without the need for additional ports or cabling. This configuration reduces the total number of ports and saves cabling costs, as an additional primary and back-up line is not needed.
Industrial Ethernet Switches Managed Switches introduction QoS supports real-time capability Quality of Service (QoS) enables the possibility of prioritisation of data traffic in a network and ensures that important data is consistently available. Weidmüller managed switches can deal with IEEE 802.1p/1Q layer 2 CoS tags and also layer 3 TOS information. The QoS functionality of Weidmüller’s managed switches improves network performance and ensures that time-critical applications are given priority.
Industrial Ethernet Switches Managed Switches introduction VLAN – simplifies network planning 9/$1 9/$1 9/$1 7LHU B VLAN stands for virtual LAN. It is a network structure with all the characteristics of a normal LAN, but not geographically constrained. A network can be divided into different sections using the VLAN function. It is possible, for example, to group servers or workstations together, based on their function.
Industrial Ethernet Switches Managed Switches Fast Ethernet – Value Line 5-Port managed Fast Ethernet Switches • Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP • Turbo Ring and Turbo Chain with fast recovery time (<20 ms for up to 250 switches) • IGMP snooping, QoS, port- and tag-based VLAN • Configurable error messages via SNMP trap, e-mail or relay output • User-friendly, web-based configuration and management PP LQ PP LQ PP LQ Technic
Industrial Ethernet Switches Managed Switches Fast Ethernet – Value Line 8-Port managed Fast Ethernet Switches • Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP • Turbo Ring and Turbo Chain with fast recovery time (<20 ms for up to 250 switches) • IGMP snooping, QoS, port- and tag-based VLAN • Configurable error messages via SNMP trap, e-mail or relay output • User-friendly, web-based configuration and management PP LQ PP LQ B PP LQ Techn
Industrial Ethernet Switches Managed Switches Fast Ethernet – Premium Line 8 and 16-Port managed Fast Ethernet Switches • Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP • Plug-n-play Turbo Ring and Turbo Chain (<20 ms for up to 250 switches) • IEEE 1588 PTP, Modbus/TCP, LLDP, SNMP Inform, QoS, IGMP snooping, VLAN, IEEE 802.1X, HTTPS, SNMPv3, and SSH supported 9.0 mm (0.4 in) IE-SW_PL08M-Series 9.0 mm (0.4 in) IE-SW-PL16M-Series 135.0 mm (5.3 in) 135.0 mm (5.3 in) 105.
Industrial Ethernet Switches Managed Switches Fast/Gigabit Ethernet – Premium Line 10-Port managed Fast/Gigabit Ethernet Switches • Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP • 2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port for uplink solution • Ring redundancy with fast recovery time (< 20 ms for up to 250 switches) • IEEE 1588 PTP, LLDP, SNMP Inform, QoS, IGMP snooping, VLAN, IEEE 802.
Industrial Ethernet Switches Managed Switches Fast/Gigabit Ethernet – Premium Line 18-Port managed Fast/Gigabit Ethernet Switches • Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP • 2 Gigabit Ethernet ports plus 16 Fast Ethernet ports for copper and fibre • Ring redundancy with rapid recovery time (< 20 ms for up to 250 switches) • IEEE 1588 PTP, LLDP, SNMP Inform, QoS, IGMP snooping, VLAN, IEEE 802.
Industrial Ethernet Switches Managed Switches Gigabit Ethernet – Premium Line 9-Port managed Gigabit Ethernet Switches • Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP • 4* 10/100/1000BaseT(X) ports plus 5* combo-ports (10/100/1000BaseT (X) or 100/1000BaseSFP slot) • Ring redundancy with rapid recovery time (< 20 ms for up to 250 switches) • IEEE 1588 PTP, LLDP, SNMP Inform, QoS, IGMP snooping, VLAN, IEEE 802.
Industrial Ethernet Switches Power over Ethernet Switches Power over Ethernet switches Power and data transferred in parallel Power over Ethernet (PoE) describes a process where power can be supplied to a network-compatible device over the 8-wire Ethernet cable. In a narrower sense, PoE today means the IEEE 802.3af (DTE Power over MDI) standard which was adopted in June 2003.
6-Port unmanaged Fast Ethernet PoE+ Switches • 4x IEEE 802.
Industrial Ethernet Switches Unmanaged Switches Gigabit Ethernet - Power over Ethernet – Basic Line 5-Port unmanaged Gigabit Ethernet PoE+ Switches • Gigabit Ethernet at all ports • 4x IEEE 802.3af/at conform PoE ports • Up to 36 Watt per PoE port • 12/24/48 V DC redundant wide-range power supply • Support for jumbo frames • Intelligent power consumption detection and classification • Intelligent PoE surge voltage and short-circuit protection PWR1 PWR2 PoE+ 4 5 2 3 10 / 100 / 1000M 135 mm B \%
B B.
Industrial Security Router Contents Industrial Security Router Overview Industrial Security Router Industrial Security Router introduction C.2 Industrial Security Router C.6 u-link Remote Access Service C.8 C 2596860000 C.
Industrial Security Router Industrial Security Router introduction Gigabit Industrial Security Router Secure data communication with integrated VPN technology You want to be able to communicate with your machinery and systems securely, reliably, and from anywhere? Should only verified data gain access to your industrial network? Then the new Industrial Security Router from Weidmüller is just the right choice.
Industrial Security Router Industrial Security Router introduction Securely integrate machines in a production network with Gigabit Ethernet The router enables controlled and secure data exchange between “switched” Ethernet networks (IP routing). The various manifestations of the Network Address Translation function (1:1 NAT, masquerading, virtual mapping, port and IP forwarding) provide controlled access to both sub-networks as well as individual Ethernet devices.
Industrial Security Router Industrial Security Router introduction Control and monitoring via integrated digital inputs and outputs The router is equipped with 2 digital inputs (“Cut” and “VPN initiate”) and 2 digital outputs (“Alarm” and “VPN active”). The 24 V input “Cut” allows the RJ45 WAN port to be temporarily disabled, e.g. to prevent unauthorised access by third parties to the WAN network during maintenance work on the LAN network.
Industrial Security Router Industrial Security Router introduction User-friendly configuration via web interface The router can be configured using any standard browser. The clear menu structure provides easy-to-learn and intuitive user guidance. The user interface can be switched between German and English. Configuration support for users is provided by integrated online help (tool tips) with detailed instructions about the various settings.
Industrial Security Router Industrial Security Router C Gigabit Industrial Security Router • 2 or 6 Gigabit ports (LAN/WAN) • NAT masquerading, 1:1 network mapping and port forwarding • VPN function via u-link Remote Access Service, OpenVPN and IPsec • Key switch function for disabling/enabling of a WAN/VPN connection • Variations with 6 routed Ethernet sub networks and individual firewall rules • Variations with integrated 4G/LTE modem for fast, Internet-based radio communication access • Variat
Industrial Security Router Industrial Security Router \ Interfaces RJ45 ports USB port Digital outputs Digital inputs Ordering data 10/100/1000BaseT (X), auto negotiation, full/half duplex mode USB 2.
Industrial Security Router u-link Remote Access Service u-link Remote Access Service Convenient remote access, simple and secure C Whether product characteristics, costs, supply chains, or quantities: the customer requirements change and manufacturing companies have to accommodate changes more and more quickly.
One single tool for all cases Advanced functions for convenient remote access management Its unique features make u-link the base for a cost-effective and secure setup even of extensive remote access topologies. With its intuitive, precise structure, you can efficiently manage multiple production facilities and users. You can add an unlimited number of supplementary routers to optimally fit u-link to the needs of your company.
Industrial Security Router u-link Remote Access Service C C.10 u-link is that simple Four steps to remote access The u-link Remote Access Service operates from a central meeting point server. Clients – such as service PCs and routers – may network via outgoing connections to the meeting point. A high security level can be maintained, when no incoming connections are allowed. At the same time, flexibility is ensured because the routers do not require static IP addresses.
Simple-secure-u-link The holistic security concept for your networks • u-link uses X.509 certificates for meeting point server authentication; these certificates are generated locally on the devices and are not transferred • 2048-bit keys secure protection • The u-link web portal is protected by a TLS/SSL connection and 2-factor authentication • u-link uses outbound connections only.
Industrial Security Router u-link Remote Access Service License overview and features Always the right package for your application u-link has a free entry version with which you can get to know the system. The standard versions are valid for one year and offer many other features that simplify the use of remote access. C C.12 The standard version accepts additional routers and several simultaneous connections at a high data transmission rate. You can even establish a safe tunnel connection to China.
Industrial Security Router u-link Remote Access Service u-link licences Weidmüller offers the following usage variations and additional options for the u-link Remote Access Service: Entry version • Free-of-charge usage, no period restriction • Max.
C C.
Media converter and protocol gateways Overview Media converter and protocol gateways Media converter D.2 Serial/Ethernet converter D.4 Serial/fibre-optic converter D.6 Modbus TCP/RTU Gateway D.8 Media converter and protocol gateways Contents D 2596860000 D.
Media converter and protocol gateways Media converter Media converter A smooth transition from copper to fibre-optic cables If high interference immunity is needed or long transmission distances are involved, then fibre-optic cables are advisable. Another advantage of using fibre-optic cabling is the insensitivity to lightning or voltage surges. The use of fibre-optic based systems is already established in areas such as the process industry, plant engineering, energy distribution and wind energy.
Industrial Media Converter (10/100BaseT (X) to 100BaseFX) • 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X • Link Fault Pass-Through (LFP) • Power failure, port break alarm by relay output • Redundant power inputs • Designed for hazardous locations (Zone 2) PP LQ ,( 0& 9/ 6HULHV PP LQ PP LQ PP LQ Technical data Technology Standards Interfaces Fibre Ports RJ45 ports DIP Switches IEEE 802.3 for 10BaseT IEEE 802.
Media converter and protocol gateways Serial/Ethernet converter Serial/Ethernet converter Simple integration of end devices into Ethernet networks Serial interfaces such as RS232, RS422 or RS485 are widespread today in automation systems. To integrate these devices into modern Industrial Ethernets, Serial/Ethernet converters are used which offer investment protection for existing automation components. These devices include control systems, sensors, meters, drives, bar code readers and operator displays.
1 and 2- port Serial/Ethernet Converter for industrial automation • High surge protection for the serial ports, LAN ports and power supply connection • Rugged screw-type terminal blocks for power and serial connectors • Cascading Ethernet ports for easy wiring • Redundant DC power inputs • Warning by relay output and email • Low power consumption Media converter and protocol gateways Serial/Ethernet converter 140 mm (5.51 in) 149 mm (5.87 in) 36 mm (1.
Media converter and protocol gateways Serial/fibre-optic converter Serial/fibre-optic converter Transmitting serial signals via fibre-optic cables Serial/fibre-optic converter Ring operation If high interference immunity is needed or long transmission distances are involved, then fibre-optic transmission is advisable. Another benefit of using fibre-optic transmission is that it is not sensitive to electromagnetic influences.
Serial/fibre-optic converters • “Ring” and “point-to-point” modes of transmission • Extension of RS232/422/485 transmission to up to 5 km • Supports baud rates of 50 bps to 921.
Media converter and protocol gateways Modbus TCP/RTU Gateway Modbus TCP/ RTU Gateway • Slave mode to support 16 TCP masters and up to 31 serial slaves simultaneously • Master mode to support 32 TCP slaves simultaneously • Integrated Modbus protocol analysis • Redundant DC voltage supply inputs • Cascaded Ethernet ports for easy cabling 9 mm 127.5 mm 118.5 mm 89.2 mm 32.9 mm 35 mm 25.9 mm 35 mm \% 29 mm Technical data D Ethernet Interface Number of Ports Speed Connection Magnetic Isolation P
Contents Industrial WLAN Industrial WLAN Industrial WLAN Overview Industrial WLAN introduction E.2 Industrial WLAN E.6 E 2596860000 E.
Industrial WLAN Industrial WLAN introduction Industrial WLAN Wireless communication solutions Wireless communications are preferred when working with mobile applications or difficult-to-reach areas. Currently, wireless LAN can be used for industrial manufacturing plants or facilities; it is ideal for use anywhere where traditional cabling is not suitable or where a mobile network connection is required. For example in logistics AGVs (automatic guide vehicles) are connected over a WLAN.
Industrial WLAN Industrial WLAN introduction Wireless operating modes The most common operating mode for wireless networks are AP client mode (Access Point) and bridge mode. In AP-client mode an Access Point is necessary to set up a Basic Service Set (BSS) for a wireless connection. The AP can be used to create a wireless LAN, or to connect an existing WLAN with a wired network. Bridge mode offers a simple way to connect two Ethernet devices over a point-topoint connection wirelessly with one another.
Industrial WLAN Industrial WLAN introduction Wireless VLAN (Multi-SSID) 66,' 9/$1 9/$1 66,' 66,' 3/& 3/& 7LHU 3/& 7LHU E 9/$1 7LHU VLAN stands for virtual LAN. It is a network structure with all the characteristics of a normal LAN, but not geographically constrained. Based on the SSID, two or more clients can be added into a VLAN and integrated into a LAN independently of their geographical location.
E 2596860000 E.
Industrial WLAN Industrial WLAN BasicLine WLAN Access Point/Client • IEEE 802.11a/b/g/n conform access point/client • MIMO technology for data rates up to 300Mbit/s • Fast roaming for interruption-free connection change between access points • DFS support in 5GHz bandwidth Technical data WLAN Interface Standards IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.
PP LQFK Industrial WLAN Industrial WLAN PP LQFK PP LQFK % \ )URQW 9LHZ Technical data Technical data Housing Weight Dimensions (W x H x D) Installation Environmental Limits Operating temperature Storage Temperature Ambient Relative Humidity Power Requirements Input Voltage Connection Power Consumption Power consumption Reverse Polarity Protection Approvals Security Radio EMC MTBF (mean time between failures) Time Database Warranty Warranty Period 2596860000 5HDU 9LH
Industrial WLAN Industrial WLAN ValueLine WLAN Access Point/Bridge/Client • IEEE 802.11a/b/g/n conform Access Point/Client/Bridge • MIMO technology for data rates up to 300Mbit/s • Fast roaming for interruption-free connection change between access points • DFS support in 5GHz bandwidth • Power can be supplied via PoE in accordance with IEEE 802.3af • Integrated DI/DOs for monitoring and alarms Technical data WLAN-Interface Standards IEEE 802.11a/b/g/n for wireless LAN IEEE 802.
3:5 3:5 3R( )$8/7 Industrial WLAN Industrial WLAN /$1 0 56 &2162/( 6,*1$/ :/$1 :LUHOHVV $3 %ULGJH &OLHQW $ 67$7( /$1 % \T R Technical data Technical data Housing Weight Dimensions (W x H x D) Installation Environmental conditions Operating temperature Storage temperature Relative ambient air humidity Power supply Input voltage Connection Current consumption Power consu
Industrial WLAN E E.
Accessories – Active components Contents Active components Overview of accessories Accessories – Active components SFP-Transceiver (Fast Ethernet/Gigabit Ethernet) F.2 Module for creating configuration backup F.3 Mounting kits for 19“ rack, wall, DIN rail F.4 F 2596860000 F.
Accessories – Active components SFP-Transceiver (Fast Ethernet/Gigabit Ethernet) Gigabit Ethernet SFP-Transceiver Fast Ethernet SFP-Transceiver • Supports DDM (Digital Diagnostic Monitoring) • IEEE 802.3z-conform • Symmetric LVPECL inputs and outputs • TTL signal detection indicator • Pluggable during operation (hot pluggable) • Class 1 laser product; EN 60825-1-conform • Supports DDM (Digital Diagnostic Monitoring) • IEEE 802.
Accessories – Active components Module for creating configuration backup Module for saving and loading a device configuration • Reduce system downtime by simple reconfiguration in case of replacing devices • Automatic loading of the saved configuration possible after device restart • Compact, rugged, reliable design • Can be used with all Weidmüller managed switches and WLAN-Access Points % Technical data Basic Operation Connection Configuration Power Requirements Input Voltage Technical data Housin
Accessories – Active components Mounting kits for 19“ rack, wall, DIN rail Kit for 19" rack-mounting Wall mounting kit Technical data Technical data • For mounting DIN-rail based devices in 19" racks Technical data Dimensions (W x H x D) Ordering data Version 19" Rack Mounting Kit • Mounting kit for alternative wall-mounting of DIN rail-based Industrial Ethernet components. Usage Industrial Ethernet Switches 481 x 177.8 x 202.4 mm Type RM-KIT Order No.
Wall mounting kit DIN rail mounting kit Technical data Technical data • Mounting kit for alternative wall-mounting of DIN rail-based Industrial Ethernet components. Usage Industrial Ethernet Switches Industrial Ethernet Medienkonverter Industrial Wireless Access Point Ordering data Version Wall mounting kit 2596860000 Product lines: IE-SW- BL06/BL08 IE-SW- VL05/VL08/VL09/VL16 IE-SW- PL06/PL08/PL09/PL10/PL16/PL18 Product lines: IE-MC-VL Product lines: IE-WL Type IE-WALLMOUNT-KIT-46MM Order No.
F F.
Introduction – Passive components Contents Passive components Introduction Introduction – Passive components IE-line connectors G.2 Cable configurator G.4 Differences between industrial and office Ethernet G.6 IE-LINE connectors: the modular principle G.7 IE-LINE connectors: selection chart G.8 PROFINET and SERCOS III cabling solutions G.10 EtherNet/IP cabling solutions G.14 G 2596860000 G.
Introduction – Passive components IE-line connectors IE-LINE plug-in connectors Clever and flexible with STEADYTEC® technology STEADYTEC® – this name stands for the future of connection technology in the field of data and signal transmissions. Established market leaders in the industry, STEADYTEC® forms the foundation for reliable, applicationorientated, standards-compliant solutions - for offices through to areas with harsh industrial conditions.
Introduction – Passive components IE-line connectors Tool-free assembly and powerful connections: the RJ45 gigabit connector! You can now securely plug the connector you need directly into your machinery with very little effort – and without a single tool! The 10-gigabit connector, with IDC-connection, was developed to provide quick, simple, secure and, most importantly, tool-free wiring.
Introduction – Passive components Cable configurator Cable configurator Tailor-made connections The cable configurator allows you to configure your specific cable with comfort, speed and simplicity. Just select, request order – and you are finished! Make your selection from the list of available cables (material for cable sheathing, category, colour, …). Next, choose the connector for both the right and left cable ends and then choose the cable length.
Introduction – Passive components Cable configurator After you have made your selection, there are several available options: • Locate and display the data sheet for the assembled cable • Export the information in Excel or CSV format • Save the configuration • Create additional cables or load previous cables • Place the assembled cable in the shopping cart to obtain a quote or to order G Practically all types of connectors and cables can be combined to your requirements! 2596860000 G.
Introduction – Passive components Differences between industrial and office Ethernet Surroundings Transmission Cabling G From office communication to Industrial Ethernet An overview of the differences G.
Introduction – Passive components IE-LINE connectors: the modular principle Unlimited combinations of IE-LINE plug-in connectors The modular principle Plug insert Plug housing Flange-mounted housing Flange insert HDC RockStar® / Variant 5 RJ45 coupling RJ45 can be assembled on-site Push-Pull / Variant 14 RJ45 Modul A, B, P Bayonet / Variant 1, plastic USB-A coupling Copper RJ45 crimp G Fibre-optic Bayonet / Variant 1, metal 2xSC Push-Pull / Variant 4 2SC/SCRJ adapter LC duplex Push-Pull
Introduction – Passive components IE-LINE connectors: selection chart Metal plug Housings Inserts RJ45 AWG 24 crimp RJ45 AWG 22 tool-free LWL SC LWL LC 1962720000 TIA-A/-B/-P TIA-A TIA-B PROFINET Multimode Singlemode POF Multimode Singlemode 1962730000 1132010000 1132020000 1132030000 1067380000 1067390000 1067410000 1962780000 1962790000 Protective cap G Variant 1 Bayonet With KS 1962560000 1963150000 Without KS 1962550000 1963140000 1963130000 1963120000 1963270000 1963310000 1963260000 196
Introduction – Passive components IE-LINE connectors: selection chart Metal flange Housings Inserts RJ45 coupling RJ45 module SC/SCRJ coupling LC Duplex coupling 1962840000 TIA-A TIA-B PROFINET Multimode Singlemode 1962850000 1963840000 1963830000 1964430000 1962870000 Multimode Singlemode 1964420000 1962880000 USB coupling 1019570000 Protective cap Variant 1 Bayonet 1963540000 1963470000 Variant 14 PushPull RJ Standardised flange 1011540000 1012310000 Central flange 1047950000 1058250000 1
Introduction – Passive components PROFINET and SERCOS III cabling solutions Customised cabling solutions for PROFINET and SERCOS III Weidmüller‘s cabling products enable you to create a specific infrastructure that meets all the requirements of PROFINET and SERCOS III. The cabling components for copper and fibre-optic cables are designed and tested for use in harsh industrial conditions.
Introduction – Passive components PROFINET and SERCOS III cabling solutions Weidmüller offers you a wide range of cabling solutions for PROFINET and SERCOS III applications. IP20 plug-in connectors for copper and fibre-optic cables are also included as well as IP67 plug-in connectors and junction boxes for the toughest requirements. The components are designed to be used together from the floor distributors down to the machines.
Introduction – Passive components PROFINET and SERCOS III cabling solutions Selection table Ideal combinations IP20 plug-in connector IP20 assembled data cables Description RJ45 tool-free PROFINET printing RJ45 tool-free angeld Profinet printing SC-RJ for POF fibres 1 mm SC-RJ for multimode fibres 50/62.5 μm SC-RJ for singlemode fibres 9 μm Type IE-PS-RJ45-FH-BK-P IE-PS-RJ45-FH-90-P-1.6 IE-PS-SCRJ1-POF IE-PS-SCRJ1-MM IE-PS-SCRJ1-SM Order No.
Introduction – Passive components PROFINET and SERCOS III cabling solutions IP67 data connectors IP67 assembled data cables Description PushPull RJ45 tool-free module PROFINET printing PushPull Hybrid (Q10) use, 10-pole module without contacts Contacts for Hybrid (Q10) use 0.75 mm² VPE 300 Contacts for Hybrid (Q10) use 0.2 mm² - 0.
Introduction – Passive components EtherNet/IP cabling solutions Customised cabling solutions for Ethernet/IP The wiring guidelines for EtherNet/IP clearly define the interfaces to be used to ensure interoperability in EtherNet/IP systems. Weidmüller offers all the cabling products needed to build a requirement specific infrastructure which is tailored to the needs of EtherNet/IP.
Introduction – Passive components EtherNet/IP cabling solutions Weidmüller offers you a wide range of cabling solutions for EtherNet/IP applications. IP20 plug-in connectors for copper and fibre-optic cables are available, as well as IP67 connectors and junction boxes for the most exacting requirements. The components are designed to be used together from the floor distributors down to the machines.
Introduction – Passive components EtherNet/IP cabling solutions Selection table Ideal combinations for a perfect fit IP20 plug-in connector IP20 assembled data cables Description RJ45 crimp RJ45 tool-free TIA-A printing RJ45 tool-free TIA-B printing SC-RJ for 1 mm POF fibres SC-RJ for multimode fibres 50/62.5 μm SC-RJ for singlemode fibres 9 μm Type IE-PS-RJ45-TH-BK IE-PS-RJ45-FH-BK-A IE-PS-RJ45-FH-BK-B IE-PS-SCRJ1-POF IE-PS-SCRJ1-MM IE-PS-SCRJ1-SM Order No.
Introduction – Passive components EtherNet/IP cabling solutions IP67 assembled data cables Description Bayonet metal RJ45 patch cable PUR 1 m Bayonet metal RJ45 patch cable PUR 2 m Bayonet metal RJ45 patch cable PUR 5 m Bayonet metal RJ45 patch cable PUR 10 m Bayonet plastic RJ45 patch cable PUR 1 m Bayonet plastic RJ45 patch cable PUR 2 m Bayonet plastic RJ45 patch cable PUR 5 m Bayonet plastic RJ45 patch cable PUR 10 m Other EtherNet/IP cables available on request IP67 plug-in M12 connectors IP65 conn
G G.
IP20 plug-in connectors and mounting rail outlets Contents IP20 plug-in connectors and mounting rail outlets Overview IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors RJ45 Plug H.2 FO Connector H.8 Coupling BNC H.10 RJ45 H.11 USB H.14 FO H.15 IP20 mounting rail outlets H 2596860000 H.
RJ45 plug, tool free 8-wire 4-wire for PROFINET 9.45 • Cat. 6A (8-wire) / Cat. 5 (4-wire) for PROFINET • Multiport-compatible • IP20 9.45 IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors 2 51.3 2 51.3 12.9 12.9 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP20 Zinc diecast 0.48 mm / 0.76 mm AWG 26/7 / AWG 22/7 0.41 mm / 0.64 mm AWG 26/1 / AWG 22/1 Approval of the cable by Weidmüller necessary 0.85 mm / 1.6 mm 5.5 mm / 8.
RJ45 plug, straight, tool free 8-wire, insulation diameter 1.1 - 1.6 mm 8-wire, insulation diameter 0.85 - 1.1 mm • Fieldattachable • Cat. 6A (8-wire) • Multi-port-compatible • IP20 IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors Technical data Category Protection degree Housing main material Connection diameter, flexible, min. / max. Connection cross-section, flexible, min. / max. Connection diameter, solid, min. / max. Connection cross-section, solid, min. / max.
IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors RJ45 plug, angled, tool free 8-wire, insulation diameter 1.1 - 1.6 mm 8-wire, insulation diameter 0.85 - 1.1 mm • Fieldattachable • Cat. 6A (8-wire) • Multi-port-compatible • IP20 Ø13,9 Ø13,9 Technical data H Category Protection degree Housing main material Connection diameter, flexible, min. / max. Connection cross-section, flexible, min. / max. Connection diameter, solid, min. / max.
RJ45 plug, straight and angled, tool free 4-wire for PROFINET 4-wire for PROFINET • Fieldattachable • Cat. 5 (4-wire) for PROFINET •M ulti-port-compatible • IP20 straight angled IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors Ø13,9 Technical data Category Protection degree Housing main material Connection diameter, flexible, min. / max. Connection cross-section, flexible, min. / max. Connection diameter, solid, min. / max. Connection cross-section, solid, min. / max.
IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors RJ45 crimp plug 8-wire, housing 1-part 8-wire, housing 2-part • Cat. 6 • With kink protection • With locking-lever protection approx. 41 13.9 10 6.6 24.8 11.68 Technical data Category Protection degree Connection diameter, flexible, min. / max. Connection cross-section, flexible, min. / max. Connection diameter, solid, min. / max. Connection cross-section, solid, min. / max. Insulation cross-section, max.
RJ45 PROFINET crimp plug IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors 4-wire for PROFINET, housing 1-part Technical data Category Protection degree Connection diameter, flexible, min. / max. Connection cross-section, flexible, min. / max. Connection diameter, solid, min. / max. Connection cross-section, solid, min. / max. Insulation cross-section, max. Sheath diameter, min. / max.
FO connector SC-RJ ST 3.2 9.6 mm 8.95 mm 47 mm 2.5 mm 7.35 mm 51 mm 3.2 mm • IP20 2.5 mm IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors Technical data IP20 1000 -20 °C...80 °C IEC 61754-24 0.6 mm...1.4 mm Copper, nickel-plated Rustless steel Zirconia, Hole 125.5 µm TPE TPE 100 N PC UL 94 V0 Zinc diecast 0...93 % rel. humidity 2.8 mm / 3 mm UL Protection degree Plugging cycles Ambient temperature (operational) Connector standard Individual wire diameter, min.
FO connector SC Duplex IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors LC duplex 3.1 mm 50 mm 25.5 mm 9.7 mm 1.25 mm 3.2 mm 50 mm 12.7 mm 2.5 mm • IP20 12.3 mm 6.25 mm Technical data IP20 1000 -40 °C...70 °C IEC 61754-4 0.6 mm...1.4 mm Copper, nickel-plated Rustless steel Zirconia, Hole 127 µm TPE TPE 100 N PC UL 94 V0 Zinc diecast 0...93 % rel. humidity 2.
BNC RJ45 keystone 21.6 max. 6 Ø 17 Ø 9.7 36 12 Ø 13 Coupling BNC 1/2-28 UNEF IP20 plug-in connectors and mounting rail outlets IP20 plug-in connectors SW 16 Technical data H Housing main material Insulation Return loss (attenuation) Characteristic impedance O-Ring Category Protection degree Plugging cycles PoE / PoE+ Connector standard Approvals Note Ordering data Note Accessories Brass, nickel-plated PTFE 23 dB at 4 GHz, 27 dB at 1 GHz 50 Ω NBR Zinc diecast Cat.
Module RJ45 Outlet direction straight 8-wire IP20 plug-in connectors and mounting rail outlets IP20 mounting rail outlets 4-wire 67.05 2.64" 59.55 2.34" 1 0.6 7.5 9" 59.55 2.34" 1 0.6 7.5 9" 67.05 2.64" • Cat. 6A • IP20 • TS 35 Technical data Category Protection degree Housing main material Contact surface Colour Type of mounting Plugging cycles Configuration Ambient temperature (operational) Temperature range, assembly, min. / max. Connector standard Connection diameter, flexible, min. / max.
IP20 plug-in connectors and mounting rail outlets IP20 mounting rail outlets Module RJ45 Outlet direction diagonal 8-wire • Cat. 6 • IP20 • TS 35 (1TE) 17.5 + 0.5 26.1 35 26.1 4 ± 0.55 60 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP20 PA 66, UL 94: V-0 Category Protection degree Housing main material Contact surface Colour Type of mounting Plugging cycles Configuration H Light Grey TS 35 750 Inspection window for labelling 1 TE pitch dimension acc. to DIN 43880.
Coupling RJ45, 8-wire Outlet direction straight IP20 plug-in connectors and mounting rail outlets IP20 mounting rail outlets Outlet direction diagonal • Cat. 6A • IP20 • TS 35 (1TE) 17.5 + 0.5 26.1 35 26.1 1 0.6 7.5 9" 59.55 2.34" 4 ± 0.55 67.05 2.64" 60 Technical data Category Protection degree Housing main material Contact material / Contact surface Colour Type of mounting Plugging cycles Configuration Cat.6A / Class EA (ISO/IEC 11801 2010) IP20 PA UL 94 V0 Spring steel, Ni 1.
USB connection USB A USB AB 1 0.6 7.5 9" 59.55 2.34" 1 0.6 7.5 9" 59.55 2.34" 67.05 2.64" • IP20 • TS 35 67.05 2.64" IP20 plug-in connectors and mounting rail outlets IP20 mounting rail outlets Technical data IP20 PA UL 94 V0 Light Grey TS 35 -40 °C...70 °C -25 °C...70 °C IEC 61076-3-107 USB A / USB A EAC Protection degree Housing main material Colour Type of mounting Ambient temperature (operational) Temperature range, assembly, min. / max.
Coupling fibre-optic SC duplex IP20 plug-in connectors and mounting rail outlets IP20 mounting rail outlets SC-RJ • IP20 • TS 35 Technical data IP20 PA UL 94 V0 Light Grey TS 35 1000 -40 °C...70 °C -25 °C...70 °C IEC 61754-4 UL Protection degree Housing main material Colour Type of mounting Plugging cycles Ambient temperature (operational) Temperature range, assembly, min. / max.
IP20 plug-in connectors and mounting rail outlets IP20 mounting rail outlets Coupling fibre-optic LC Duplex ST • IP20 • TS 35 (1TE) 17.5 + 0.5 26.1 35 26.1 4 ± 0.55 60 Technical data H Protection degree Housing main material Colour Type of mounting Configuration IP20 PA UL 94 V0 Light Grey TS 35 Plugging cycles Ambient temperature (operational) Temperature range, assembly, min. / max. Connector standard Approvals Note 1000 -40 °C...70 °C -25 °C...
Socket adapter IP20 plug-in connectors and mounting rail outlets IP20 mounting rail outlets Socket adapter • IP20 • TS 35 Technical data Protection degree Housing main material Ambient temperature (operational) Approvals IP20 Polycarbonate PC, Acrylnitril-Butadien-Styrol (ABS) -25 °C...
H H.
FrontCom® IP65 service interfaces Contents FrontCom® IP65 service interfaces Overview FrontCom® IP65 service interfaces I.2 FrontCom® Vario IP65 service interface FrontCom® Micro IP65 service interface RJ45 I.28 USB I.30 I 2596860000 I.
FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface FrontCom® Vario Frame Metal cover Plastic cover • IP65 • Single-insert plates can be used 67 27.5 134 27.5 134 67 Technical data Protection degree / Protection class (UL) Material cover Material frame Ambient temperature (operational) Approvals Note IP65, in closed state / Type 12 Zinc diecast, powder-coated Zinc diecast -40 °C...
FrontCom® Vario Double frame FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface Metal cover • IP65 • Single- and double insert plates can be used Technical data Protection degree / Protection class (UL) Material cover Material frame Ambient temperature (operational) Approvals Note IP65, in closed state / Type 12 Zinc diecast, powder-coated Zinc diecast -40 °C...
FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface FrontCom® Vario Insert plates for double frames 1 x power, 2 x data, 1 x LS switch • IP20 Technical data Material Insert, data Insert Power large Preparation of LS switch (2 pitch) Insert 2 x Power US + GFCI Ambient temperature (operational) Approvals Note Polycarbonate PC 2 1 1 -40 °C...
FrontCom® Vario Insert plates for double frames FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface 1x GFCI included, 2x data, 1x signal, 1x fuse • IP20 Technical data Material Insert, data Insert Power large Insert fuse Signal insert D-Sub 9-pole / VGA / HDMI Preparation of LS switch (2 pitch) Insert 2 x Power US + GFCI Ambient temperature (operational) Approvals Technical data GFCI insert Operating voltage / Rated current GFCI protected US outlet Self-test Statu
FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface FrontCom® Vario Insert plates blank double plate blank single plate • IP20 Technical data Material Ambient temperature (operational) Approvals Note Polycarbonate PC -40 °C...70 °C CURUS Ordering data Note Accessories unshielded Polycarbonate PC -40 °C...70 °C CURUS; GERMLLOYD Type IE-FC-DIP-BP Qty. 1 Order No. 2004890000 Type IE-FC-IP-BP Qty. 1 Order No. 1450710000 Type Qty.
FrontCom® Vario Insert plates 1 x power, 2 x data FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface 1x Power, 1x Signal • IP20 Technical data Material Insert, data Signal insert D-Sub 9-pole / VGA / HDMI Insert, signal, D-Sub, 25-pole Insert Power large Insert Power small Insert Power US Ambient temperature (operational) Approvals Note Ordering data Note shielded unshielded Accessories Inserts, Signal Inserts, Data Markers Touch-safe prote
FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface FrontCom® Vario Insert plates 1x Power 1x Power, 2x Data, 1x Signal • IP20 Technical data Polycarbonate PC Material Insert, data Signal insert D-Sub 9-pole / VGA / HDMI Insert, signal, D-Sub, 25-pole Insert Power large Insert Power small Insert Power US Ambient temperature (operational) Approvals Note 1 I shielded unshielded Accessories Inserts, Signal Inserts, Data Markers Touch-safe pro
FrontCom® Vario Insert plates 1 x power, 4 x data FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface 1 x power, 2 x signal • IP20 Technical data Material Insert, data Signal insert D-Sub 9-pole / VGA / HDMI Insert, signal, D-Sub, 25-pole Insert Power large Insert Power small Insert Power US Ambient temperature (operational) Approvals Note Ordering data Note shielded unshielded Accessories Inserts, Power Inserts, Data Markers Touch-safe prote
FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface FrontCom® Vario Insert plates 1 x power, 2 x data 1 x power, 1 x 3A fuse, 1 x data • IP20 Technical data Material Insert, data Signal insert D-Sub 9-pole / VGA / HDMI Insert, signal, D-Sub, 25-pole Insert Power large Insert Power small Insert Power US Insert fuse Ambient temperature (operational) Approvals Note Note shielded unshielded Accessories Inserts, Signal Inserts, Data Markers Touch-s
FrontCom® Vario Insert plates 2 x data, 2 x signal FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface 1 x data, 2 x signal • IP20 Technical data Material Insert, data Signal insert D-Sub 9-pole / VGA / HDMI Insert, signal, D-Sub, 25-pole Insert Power large Insert Power small Insert Power US Insert fuse Ambient temperature (operational) Approvals Note Ordering data Note shielded unshielded Accessories Inserts, Signal Inserts, Data Markers Touch-sa
Data inserts RJ45 Module Coupling 13,19 • Cat. 6A • IP20 • For housing variants 1, 4, 5, 14 and for FrontCom® 13,19 FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface 1 15,6 40, 15,6 51 32, Technical data Protection degree Plugging cycles Shielding Housing main material Contact surface Connection cross-section, flexible, min. / max. Connection cross-section, solid, min. / max. Insulation diameter, min. / max.
Data inserts USB Coupling USB A/A Coupling USB A/B IP67 with housing 360° all-round enclosure -40 °C...70 °C USB A / USB A IEC 61076-3-107 CULUS; GERMLLOYD IP67 with housing 360° all-round enclosure -40 °C...
FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface Signal inserts D-sub 9-pole 25-pole • IP20 Technical data Protection degree Housing main material No.
Signal inserts HDMI FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface HD15 / VGA 7.9±0.2 #15 #11 4.75±0.1 #1 #5 • IP20 25±0.15 30.86±0.15 Technical data Protection degree Housing main material No. of poles Housing surface Contact surface Contact resistance Insulation resistance Dielectric strength, contact / contact Ambient temperature (operational) Approvals Note Ordering data Note Accessories IP20 PVC casting 9 IP20 Gold-plated Gold over nickel -15 °C...
Power inserts Power sockets Germany, white Germany, orange • IP20 FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface Technical data Protection degree Housing main material Type of connection Connector face Connector standard Line connection cross-section finely stranded with wire-end ferrule finely stranded without wire-end ferrule finely stranded with wire-end ferrule finely stranded without wire-end ferrule Conductor conn
France, white France, orange IP20 Polycarbonate PC PUSH IN Type J IP20 Polycarbonate PC PUSH IN Type E IP20 Polycarbonate PC PUSH IN Type E 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 2.5 mm² 10 mm 250 V 10 A -5 °C...50 °C GERMLLOYD 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 2.5 mm² 10 mm 250 V 16 A -5 °C...50 °C GERMLLOYD 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 2.5 mm² 10 mm 250 V 16 A -5 °C...
Power inserts Power sockets UK Italy / Europe • IP20 FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface Technical data Protection degree Housing main material Type of connection Connector face Connector standard Line connection cross-section finely stranded with wire-end ferrule finely stranded without wire-end ferrule finely stranded with wire-end ferrule finely stranded without wire-end ferrule Conductor connection cross-section, rigid S
40.4 32 23.4 45 23.4 45 Australia, 10 A 32 Australia, 15 A Czech Republic FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface 40.4 45 45 IP20 Polycarbonate PC PUSH IN Type E IP20 Polycarbonate PC Screw connection Type I IP20 Polycarbonate PC Screw connection Type I 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 2.5 mm² 12 mm 250 V 16 A -5 °C...50 °C 1.5 ... 2.5 mm² 1.5 ... 4 mm² 1.5 ... 2.5 mm² 1.5 ... 4 mm² 1.5 ...
Power inserts Power sockets China USA • IP20 FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface Technical data Protection degree Housing main material Type of connection Connector face Connector standard Line connection cross-section finely stranded with wire-end ferrule finely stranded without wire-end ferrule finely stranded with wire-end ferrule finely stranded without wire-end ferrule Conductor connection cross-section, rigid Stripp
45 37 28 Israel India FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface 40.4 45 IP20 Polycarbonate PC Screw connection Type D IP20 PP Screw connection Type H 1.5 ... 2.5 mm² 1.5 ... 1.5 mm² 1.5 ... 2.5 mm² 1.5 ... 1.5 mm² 1.5 ... 4 mm² 9 mm 250 V 13 A -5 °C...50 °C 1.5 ... 2.5 mm² 11 mm 250 V 16 A -5 °C...50 °C I Type IE-FCI-PWB-IND Qty. 1 Order No. 2500710000 Type IE-FCI-PWB-ISR Qty. 1 Order No. 2531060000 Type IE-DINRAIL-AD-PWB Qty.
Power inserts RCBO RCBO • IP20 I 230 V O FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface m : 500A T 775 32 3000 TES Tequently Fr 0mA C16 n3 Technical data Ambient temperature (operational) Operating voltage Rated current IΔm IΔn Triggering characteristic Type of connection Line connection cross-section finely stranded with wire-end ferrule finely stranded with wire-end ferrule Conductor connection cross-section, rigid Note Ordering data I Note Accessories Front
Power inserts USB charge insert FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface USB-Charger 5 V / 2.
3A fuse 3A fuse • IP20 PP FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface PP Technical data Operating voltage Rated current Type of connection Note 32 V DC, 250 V AC 3A Flat-blade receptacles 6.5 mm Ordering data Note Accessories Flat blade connector, 6.5 mm I angled straight Type IE-FCI-PWCB-3A Qty. 1 Order No. 1543690000 Type WFSKHV/1,5-2,5 VFSKHV/1,5-2,5/638 Qty. 100 100 Order No. 1491970000 1491940000 Note I.
Accessories Touch-safe protection FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface Touch-safe protection Technical data Length x width x height Material Note Ordering data Note Accessories 47.5 / 47.5 / 45 mm PC Type IE-FC-PWPC Qty. 1 Order No. 1450820000 Type Qty. Order No. I Note 2596860000 I.
FrontCom® IP65 service interfaces FrontCom® Vario IP65 service interface Sets 2x Data, 1x Power 2x Data, 1x Power Incl. fixed label: "Service only!", "USB", "Ethernet", "230 V AC" Technical data Frame Insert plate Data inserts Power inserts Rated voltage for socket Rated current for socket Protection degree products included in the set Note Ordering data I Note Accessories shielded unshielded Plastic cover, Lockable with key 2x data, 1x power, Shielded USB 2.0 A/A, RJ45 coupling Cat.
I 2596860000 I.
4-wire 87 8-wire Ø 3.7 Ø 3.7 34.7 Ø 22 .5 11.9 .5 Ø 30 Ø 30 34.7 Ø 22 11.9 FrontCom® Micro RJ45 Module 87 FrontCom® IP65 service interfaces FrontCom® Micro IP65 service interface Technical data Category Protection degree Housing main material Contact surface Colour Shielding Type of mounting Plugging cycles Connector standard Connection 1 / 2 Wall thickness, min. / max. Dust protection cap material PoE / PoE+ Ambient temperature (operational) Approvals Note I Cat.
FrontCom® Micro RJ45 Coupling FrontCom® IP65 service interfaces FrontCom® Micro IP65 service interface 87 8-wire Ø 3.7 34.7 Ø 22 11.9 .5 Ø 30 Technical data Category Protection degree Housing main material Contact surface Colour Shielding Type of mounting Plugging cycles Connector standard Connection 1 / 2 Wall thickness, min. / max. Dust protection cap material PoE / PoE+ Ambient temperature (operational) Approvals Note Cat.
Coupling AB 87 Coupling AA Ø 3.7 Ø 3.7 .5 34.7 .5 Ø 22 11.9 Ø 30 Ø 30 34.7 Ø 22 11.9 FrontCom® Micro USB 87 FrontCom® IP65 service interfaces FrontCom® Micro IP65 service interface Technical data Ambient temperature (operational) Protection degree Housing main material Colour Shielding Type of mounting Connector standard Connection 1 / 2 Dust protection cap material Wall thickness, min. / max. Approvals Note -40 °C...
IP67 plug-in connectors Contents IP67 plug-in connectors Overview IP67 plug-in connectors 2596860000 PushPull V14 - RJ45 J.2 PushPull V14 - Hybrid J.6 PushPull V14 - FO J.10 Bayonet V1 Metal-RJ45 J.12 Bayonet V1 Metal-FO J.14 Bayonet V1 Plastic-RJ45 J.18 PushPull V4 – RJ45 J.22 PushPull V4 – FO J.26 RockStar® V5 – RJ45 J.30 SnapIn V6 – RJ45 J.32 M12 D-coded J.36 M12 X-Type J.41 Inserts J.46 PushPull Power J.58 J J.
IP67 plug-in connectors PushPull V14 - RJ45 Plug PushPull V14 - RJ45 4-wire, field-attachable • 4- and 8-wire, RJ45 plug field attachable with colour coding on the plug PROFINET printing 8-wire, crimp Technical data Cat.5 (ISO/IEC 11801) IP67 Zinc diecast Gold over nickel 5 mm / 10 mm 750 -40 °C...70 °C IEC 61076-3-117 Var. 14, IEC 60603-7-51 0.48 mm / 0.76 mm AWG 26 / AWG 22 0.4 mm / 0.
PROFINET printing TIA-A 33 ± 0.1 33 ± 0.1 22 ± 0.05 .25 22 ± 0.05 18.4 ± 0.05 M3 R1 .25 Ø 27.41 +– 0.48 0.49 R1 12.56 –+ 0.21 0.22 8-wire 18.4 ± 0.05 4-wire M3 PushPull V14 - RJ45 flange Module IP67 plug-in connectors PushPull V14 - RJ45 Technical data Cat.5 (ISO/IEC 11801) IP67 Zinc diecast Gold over nickel 5 mm / 10 mm 750 -40 °C...70 °C IEC 61076-3-117 Var. 14, IEC 60603-7-51 0.48 mm / 0.76 mm AWG 26 / AWG 22 0.4 mm / 0.
PushPull V14 - RJ45 flange Coupling 8-wire .25 Ø 27.41 +– 0.48 0.49 R1 12.56 –+ 0.21 0.22 M3 33 ± 0.1 22 ± 0.05 18.4 ± 0.05 IP67 plug-in connectors PushPull V14 - RJ45 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 Zinc diecast Gold over nickel 5 mm / 10 mm 750 -40 °C...70 °C IEC 61076-3-117 Var. 14, IEC 60603-7-51 Category Protection degree Housing main material Contact surface Sheath diameter, min. / max.
PushPull V14 - RJ45 Empty housing Device flange IP67 plug-in connectors Flange-mounted empty housing / PushPull device flange V14 • IP67 13.2 0.52“ 22.2 .25 R1 33 42 Ø 27.41 +– 0.48 0.49 12.56 –+ 0.21 0.22 18.4 ± 0.05 M3 33 ± 0.1 22 ± 0.05 Technical data Category Protection degree Housing main material Contact surface Sheath diameter, min. / max. Plugging cycles Ambient temperature (operational) Connector standard Connection diameter, flexible, min. / max.
IP67 plug-in connectors PushPull V14 - Hybrid Plug PushPull V14 - Hybrid Hybrid Technical data Category Protection degree Housing main material Contact surface Sheath diameter, min. / max. Plugging cycles Ambient temperature (operational) Connection 1 / 2 Connector standard Connection cross-section, flexible, min. / max. Connection diameter, flexible, min. / max. Rated current (hybrid connector) Volume resistance Approvals Note Cat.
PushPull V14 - Hybrid Flange PushPull V14 - Hybrid IP67 plug-in connectors Standardised flange 33 ± 0.1 22 ± 0.05 .25 18.4 ± 0.05 M3 R1 Technical data Category Protection degree Housing main material Seal material Contact surface Sheath diameter, min. / max. Plugging cycles Ambient temperature (operational) Connection 1 / 2 Connector standard Connection cross-section, flexible, min. / max. Connection diameter, flexible, min. / max.
V14 flange adapter Straight Angled Ø3 .3 9 20.5 IP67 plug-in connectors PushPull V14 - Hybrid 33 22 18.4 37 60 Ø3 .3 Technical data Protection degree Housing main material Seal material Type of mounting Ambient temperature (operational) Note Ordering data Note Accessories IP67 Zinc diecast EPDM 2 screws, M3 (not included) -40...70 °C IP67 Zinc diecast EPDM 2 screws, M3 (not included) -40...70 °C Type IE-AD-BHS-V14M-RJA Qty. 1 Order No. 1302000000 Qty. Order No.
J 2596860000 J.
IP67 plug-in connectors PushPull V14 - FO PushPull V14 plug - fibre-optic Without kink prevention Technical data Protection degree Housing main material Sheath diameter, min. / max. Plugging cycles Ambient temperature (operational) Connector standard Approvals Note IP67 Zinc diecast 5 mm / 10 mm 750 -40...70 °C IEC 61076-3-117 Var.
PushPull V14 - FO .25 33 ± 0.1 22 ± 0.05 Ø 27.41 +– 0.48 0.49 M3 12.56 –+ 0.21 0.22 R1 18.4 ± 0.05 M3 33 ± 0.1 22 ± 0.05 IP67 plug-in connectors LC Duplex coupling .25 Ø 27.41 +– 0.48 0.49 R1 12.56 –+ 0.21 0.22 SC-RJ 18.4 ± 0.05 Flange PushPull V14 - fibre-optic Technical data Protection degree Housing main material Plugging cycles Ambient temperature (operational) Insertion loss Connector standard Approvals Note IP67 Zinc diecast 500 -40 °C...70 °C ≤ 0.5 dB IEC 61076-3-117 Var.
Plug bayonet V1 Metal - RJ45 Without kink prevention 78.3 20 SW 128.3 20 Ø 30 SW With kink prevention Ø 30 IP67 plug-in connectors Bayonet V1 Metal - RJ45 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 Zinc diecast Gold over nickel 5 mm / 10 mm 750 -40 °C...70 °C AWG 26 / AWG 22 0.48 mm / 0.76 mm AWG 24 / AWG 22 0.4 mm / 0.64 mm IEC 61076-3-106 Var. 1, IEC 60603-7-51 CULUS Category Protection degree Housing main material Contact surface Sheath diameter, min. / max.
Bayonet V1 Metal - RJ45 Module Coupling IP67 plug-in connectors Flange bayonet V1 Metal - RJ45 TIA-A Ø 27 + 0.3 24 ± 0.1 24 ± 0.1 + 0.3 25.9 Ø 27 25.9 + 0.3 ax R3 m ax R3 m Ø 27 Ø 27 + 0.3 Ø 3.3 ± 0.1 (4x) or M3 (4x) Ø 3.3 ± 0.1 (4x) or M3 (4x) Technical data Category Protection degree Housing main material Contact surface Plugging cycles Ambient temperature (operational) Connector standard Connection cross-section, flexible, min. / max. Connection diameter, flexible, min. / max.
Plug bayonet V1 metal - fibre-optic-SC Without kink prevention 83.7 20 SW 133.7 20 Ø 30 SW With kink prevention Ø 30 IP67 plug-in connectors Bayonet V1 Metal-FO Technical data IP67 Zinc diecast 5 mm / 10 mm 500 -40 °C...70 °C IEC 61076-3-106 Var. 1, IEC 61754-24 0.5 dB singlemode; 0.4 dB multimode; 1.5 dB POF 40 dB singlemode; 30 dB multimode EAC Protection degree Housing main material Sheath diameter, min. / max.
Bayonet V1 Metal-FO Standardised flange IP67 plug-in connectors Flange bayonet V1 metal - fibre-optic-SC Ø 27 + 0.3 24 ± 0.1 ax R3 m + 0.3 25.9 Ø 27 Ø 3.3 ± 0.1 (4x) or M3 (4x) Technical data IP67 Zinc diecast 500 -40 °C...70 °C IEC 61076-3-106 Var.
Plug bayonet V1 metal - fibre-optic-LC Without kink prevention 83.7 20 SW 133.7 20 Ø 30 SW With kink prevention Ø 30 IP67 plug-in connectors Bayonet V1 Metal-FO Technical data IP67 Zinc diecast 5 mm / 10 mm 500 -40 °C...70 °C IEC 61076-3-106 Var. 1, IEC 61754-20 0.5 dB singlemode, 0.4 dB multimode 40 dB singlemode; 30 dB multimode EAC Protection degree Housing main material Sheath diameter, min. / max.
Bayonet V1 Metal-FO Flange bayonet V1 metal fibre-optic-LC IP67 plug-in connectors Standardised flange Ø 27 + 0.3 24 ± 0.1 ax R3 m + 0.3 25.9 Ø 27 Ø 3.3 ± 0.1 (4x) or M3 (4x) Technical data IP67 Zinc diecast 500 -40 °C...70 °C IEC 61076-3-106 Var.
IP67 plug-in connectors Bayonet V1 Plastic - RJ45 Plug bayonet V1 Plastic - RJ45 Without kink prevention 80 20 128.5 Ø 30 Ø 30 SW 20 SW With kink prevention Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 PA UL 94 V0 Gold over nickel 5 mm / 10 mm 750 -40 °C...70 °C AWG 26 / AWG 22 0.48 mm / 0.76 mm AWG 24 / AWG 22 0.4 mm / 0.64 mm IEC 61076-3-106 Var. 1, IEC 60603-7-51 CULUS Category Protection degree Housing main material Contact surface Sheath diameter, min. / max.
Bayonet V1 Plastic - RJ45 Module Coupling IP67 plug-in connectors Flange bayonet V1 Plastic - RJ45 TIA-A Ø 27 + 0.3 24 ± 0.1 24 ± 0.1 + 0.3 25.9 Ø 27 25.9 + 0.3 ax R3 m ax R3 m Ø 27 Ø 27 + 0.3 Ø 3.3 ± 0.1 (4x) or M3 (4x) Ø 3.3 ± 0.1 (4x) or M3 (4x) Technical data Category Protection degree Housing main material Contact surface Plugging cycles Ambient temperature (operational) Connector standard Connection cross-section, flexible, min. / max. Connection diameter, flexible, min. / max.
IP67 plug-in connectors Bayonet V1 Plastic - RJ45 Cable coupling bayonet V1 Plastic - RJ45 Cable coupling 42,4 1.67" Ø 41,8 1.65" 118,7 4.67" Technical data Protection degree Housing main material Plugging cycles Ambient temperature (operational) Connector standard Sheath diameter, min. / max. Approvals Note IP67 PA UL 94 V0 750 -40 °C...70 °C IEC 61076-3-106 Var. 1 6 mm / 9.
J 2596860000 J.
Without kink prevention 72.6 121 20.2 20.1 SW 20 20.2 With kink prevention 20.1 Plug PushPull V4 - RJ45 SW20 IP67 plug-in connectors PushPull V4 - RJ45 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 PA UL 94 V0 Gold over nickel 5 mm / 10 mm 750 -40 °C...70 °C AWG 27 / AWG 24 0.46 mm / 0.61 mm AWG 24 / AWG 22 0.36 mm / 0.51 mm IEC 61076-3-106 Var. 4, IEC 60603-7-51 CULUS Category Protection degree Housing main material Contact surface Sheath diameter, min. / max.
PushPull V4 - RJ45 Coupling IP67 plug-in connectors Module 21 ± 0.1 Ø ± 2.5 0.2 Ø 3.3 ± 0.1 (4x) or M3 (4x) 3.3 ± 0.1 23.95 ± 0.1 Ø .2 ±0 22.5 32 ± 0.1 23.95 ± 0.1 3.3 ± 0.1 21 ± 0.1 .2 .5 ± 0 Ø 22 .5 ± Ø2 32 ± 0.1 Flange PushPull V4 - RJ45 0.2 Ø 3.3 ± 0.1 (4x) or M3 (4x) Technical data Category Protection degree Housing main material Contact surface Plugging cycles Ambient temperature (operational) Connector standard Connection cross-section, flexible, min. / max.
IP67 plug-in connectors PushPull V4 - RJ45 Cable coupling PushPull V4 - RJ45 Cable coupling 41.8 1.65" 99.15 3.9" 109.3 4.3" Technical data Protection degree Housing main material Plugging cycles Ambient temperature (operational) Connector standard Sheath diameter, min. / max. Approvals Note IP67 PA UL 94 V0 750 -40 °C...70 °C IEC 61076-3-106 Var. 4 6 mm / 9.5 mm Ordering data Note Cable coupling Accessories Inserts, Data J Marker, inside Note J.
PushPull V4 - RJ45 Empty housing Device flange IP67 plug-in connectors Flange-mounted empty housing / PushPull V4 device flange • IP67 M2,5 21 ± 0.1 3,5 ± 0,2 .5 Ø2 16,2 .2 ±0 3,5 2.5 Ø2 25,2 18,4 32 ± 0.1 23.95 ± 0,1 3.3 ± 0,1 10,35 Ø 3.3 ± 0.1 (4x) oder / or M3 (4x) Technical data Protection degree Housing main material Plugging cycles Ambient temperature (operational) Connector standard Sheath diameter, min. / max. Approvals Note IP67 PA UL 94 V0 750 -40 °C...
Without kink prevention 81.3 129.8 20.2 20.1 20.2 SW 20 With kink prevention 20.1 Plug PushPull V4 - fibre-optic-SC SW 20 IP67 plug-in connectors PushPull V4 - FO Technical data IP67 PA UL 94 V0 5 mm / 10 mm 500 -40 °C...70 °C IEC 61076-3-106 Var. 4, IEC 61754-24 0.5 dB singlemode; 0.4 dB multimode; 1.5 dB POF 40 dB singlemode; 30 dB multimode EAC Protection degree Housing main material Sheath diameter, min. / max.
PushPull V4 - FO Flange PushPull V4 - fibre-optic-SC IP67 plug-in connectors Standardised flange 21 ± 0.1 .2 .5 ± 0 Ø 22 .5 ± Ø2 32 ± 0.1 23.95 ± 0.1 3.3 ± 0.1 0.2 Ø 3.3 ± 0.1 (4x) or M3 (4x) Technical data IP67 PA UL 94 V0 500 -40 °C...70 °C IEC 61076-3-106 Var.
Without kink prevention 77.8 126.3 20.2 20.1 20.2 SW 20 With kink prevention 20.1 Plug PushPull V4 - fibre-optic-LC SW 20 IP67 plug-in connectors PushPull V4 - FO Technical data IP67 PA UL 94 V0 5 mm / 10 mm 500 -40 °C...70 °C IEC 61076-3-106 Var. 4, IEC 61754-20 0.5 dB singlemode, 0.4 dB multimode 40 dB singlemode; 30 dB multimode EAC Protection degree Housing main material Sheath diameter, min. / max.
PushPull V4 - FO Flange PushPull V4 - fibre-optic-LC IP67 plug-in connectors Standardised flange 21 ± 0.1 .2 .5 ± 0 Ø 22 .5 ± Ø2 32 ± 0.1 23.95 ± 0.1 3.3 ± 0.1 0.2 Ø 3.3 ± 0.1 (4x) or M3 (4x) Technical data IP67 PA UL 94 V0 500 -40 °C...70 °C IEC 61076-3-106 Var. 4, IEC 61754-20 Protection degree Housing main material Plugging cycles Ambient temperature (operational) Connector standard Approvals Note Ordering data - Sets Type IE-BS-V04P-LCD-SM-C IE-BS-V04P-LCD-MM-C Qty. 10 10 Order No.
IP67 plug-in connectors RockStar® V5 - RJ45 RockStar® heavy-duty connector plug V5 - RJ45 Straight V5 - RJ45 plug V5-RJ45 plug, angled 50.7 26.7 20 24 56.4 SW SW 26.7 26.7 61.9 88.6 26.7 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 diecast aluminium Gold over nickel 5 mm / 12 mm 750 -40 °C...70 °C IEC 61076-3-106 Var. 5, IEC 60603-7-51 CULUS Category Protection degree Housing main material Contact surface Sheath diameter, min. / max.
RockStar® V5 - RJ45 Module Coupling IP67 plug-in connectors RockStar® heavy-duty connector flange V5 - RJ45 39.4 39.4 Ø3.3 b b Ø3.3 23.8 30 42 23.8 30 42 24.2 30 36 24.2 30 36 Technical data Protection degree Housing main material Contact surface Plugging cycles Ambient temperature (operational) Connector standard Connection cross-section, flexible, min. / max. Connection diameter, flexible, min. / max. Connection cross-section, solid, min. / max. Connection diameter, solid, min. / max.
IP67 plug-in connectors SnapIn V6 - RJ45 Plug SnapIn V6 - RJ45 Without kink prevention • Cat. 6 • IP67 49 59.5 Technical data Category Protection degree Shielding Housing main material Contact surface Colour Plugging cycles Wiring Type of mounting Ambient temperature (operational) Connector standard Approvals Note Cat.
SnapIn V6 - RJ45 Module Coupling IP67 plug-in connectors Flange SnapIn V6 - RJ45 • Cat. 6 • IP67 33 23.89±0.2 17.5 32.5 26.6±0.2 33 23.89±0.2 17.5 32.5 26.6±0.2 Technical data Category Protection degree Shielding Housing main material Contact surface Colour Plugging cycles Type of mounting Wiring Cat.6 (ISO/IEC 11801) IP67 360° shield contact PA 66, UL 94: V-0 Gold over nickel Light Grey 750 Cabinet, Distribution box Colour-coded pin assignment according to EIA/TIA T568 A .
IP67 plug-in connectors SnapIn V6 - RJ45 Cable coupling SnapIn V6 - RJ45 Cable coupling • Cat. 6 • IP67 41.8 79 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 360° shield contact PA 66, UL 94: V-0 Gold over nickel Light Grey 750 Floor-mounted, for exposed connections, Wall mounting Colour-coded pin assignment according to EIA/TIA T568 A ., EIA/TIA T568 B -40 °C...70 °C IEC 61076-3-106 Var. 6, IEC 60603-7-5 6 mm / 9.
J 2596860000 J.
IP67 plug-in connectors M12 D-coded M12 plug, Tension-clamp connection, D-coded SAISM / SAIBM SAISW / SAIBW SW 18 mm M12 x 1 Ø 20 ~43 ~56 31.1 Ø 18 ~62 SW 18 mm ~56 Ø 18 ~38 M12 x 1 Ø 20 31.1 SW 18 mm SW 18 mm M12 x 1 M12 x 1 ~57 Technical data Type of connection Housing main material Ambient temperature (operational) Connector standard Connection thread Cable diameter Conductor cross-section min. / max.
M12 D-coded M12 plug, Screw connection, D-coded IP67 plug-in connectors SAISM / SAIBM M12 x 1 Ø 20 SW 18 mm M12 x 1 Ø 20 ~62 SW 18 mm ~57 Technical data Type of connection Housing main material Ambient temperature (operational) Connector standard Connection thread Cable diameter Conductor cross-section min. / max. Rated current Rated voltage Temperature range of housing Protection degree Contact surface Note Screw connection CuZn -40 °C...85 °C IEC 61076-2-101 M12 6...8 mm (PG9) 0.25 mm² / 0.
IP67 plug-in connectors M12 D-coded Adapter / coupling M12 Adapter M12-RJ45, female Adapter M12-RJ45, male • Cat. 5 • IP67 • D-coded 16 16 +0.1 0 13.8 ± 0.1 +0.1 0 13.8 ± 0.1 Technical data Category Protection degree Housing main material Shielding Ambient temperature (operational) Connector standard Approvals Note Cat.5 (ISO/IEC 11801) IP65 PA 66 Yes -25 °C...80 °C IEC 60603-7-5, IEC 61076-2-101 EAC Ordering data Adaptor Coupling straight angled Cat.
M12 D-coded Adapter / coupling M12 IP67 plug-in connectors Coupling M12-M12 • Cat. 5 • IP67 • D-coded Technical data Category Protection degree Housing main material Shielding Ambient temperature (operational) Connector standard Approvals Note Cat.5 (ISO/IEC 11801) IP67 Polyamide, Brass, nickel-plated 360° shield contact -5 °C...60 °C IEC 61076-2-101 EAC Ordering data Adaptor Coupling Note Accessories straight angled Type IE-M12-COUP Type Qty. 1 Qty. Order No. 8901640000 J Order No.
IP67 plug-in connectors M12 D-coded M12 PCB connection element Standard assembly Additional fastening mechanism • Cat. 5 • For installation into the end device • D-coded Technical data Category Protection degree Configuration Housing main material Shielding Ambient temperature (operational) Connector standard Approvals Note Cat.5 (ISO/IEC 11801) IP65 in acc. with DIN EN 60529 Reflow compatible CuZn, Polyamide, nickel-plated 360° shield contact -25...
M12 X-Type Plug, AWG 26-22 Plug, AWG 27-22 IP67 plug-in connectors M12 plug M12 X-type Cat. 6A 59 7 8 8 7 SW 15 6 SW 17 5 1 M12x1 2 1 20 2 6 SW14 5 ø16.8 52 4 SW14 3 3 ø16.
IP67 plug-in connectors M12 X-Type M12 plug M12 X-type Cat. 6A Plug, female Flange Technical data Category Protection degree Connection 1 / 2 Housing main material Connection thread Contact material / Contact surface Ambient temperature (operational) Connector standard Current-carrying capacity at 50 °C Rated voltage Insulation resistance Plugging cycles Configuration Wall thickness, min. / max. Shielding Connection diameter, flexible, min. / max. Connection cross-section, flexible, min. / max.
M12 X-Type M12 plug M12 X-type Cat. 6A 2 2 5 6 1 1 6 8 8 7 SW 19 34.4 min. 0.9 max. 4 5 7 IP67 plug-in connectors 46.35 4 29 3 3 M16x1.5 16.5 4 Adapter M12 X-Type-RJ45 Technical data Category Protection degree Connection 1 / 2 Housing main material Connection thread Contact material / Contact surface Ambient temperature (operational) Connector standard Current-carrying capacity at 50 °C Rated voltage Insulation resistance Plugging cycles Configuration Wall thickness, min. / max.
PCB socket M12 X-type Cat. 6A PCB socket 3 5 1 6 min. 0.9 / max. 2.5 7 2 7 21.5 2 8 11 2.5 11.5 4 ø16.5 3 PCB socket, back panel mounting M12x1 SW14 IP67 plug-in connectors M12 X-Type 2 M12x1 SW15 M12x1 SW19 7.5 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67, when screwed in M12 / Solder connection CuZn M12 CuZn / Gold over nickel -40 °C...85 °C IEC 61076-2-109 0.5 A at 40 °C 48 V 100 MΩ ≥ 100 Reflow compatible 0.9 mm / 2.
M12 X-Type PCB socket M12 X-type Cat. 6A IP67 plug-in connectors PCB socket, angled Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67, when screwed in M12 / Solder connection CuZn M12 CuZn / Gold over nickel -40 °C...85 °C IEC 61076-2-109 0.5 A at 40 °C 48 V 100 MΩ ≥ 100 Reflow compatible 1 mm / 2.
RJ45 plug inserts, tool free 8-wire 4-wire 9.45 • Cat. 6A • IP20 • For housing variants 1, 4, 5 and 14 9.45 IP67 plug-in connectors Inserts 22 22 40. 40. 12 12 .9 .9 Technical data Category Protection degree Plugging cycles Shielding Housing main material Contact material Contact surface Connection cross-section, flexible, min. / max. Connection diameter, flexible, min. / max. Connection cross-section, solid, min. / max. Connection diameter, solid, min. / max.
Inserts RJ45 plug inserts, crimp IP67 plug-in connectors 8-wire • Cat. 6A • IP20 • For housing variants 1, 4, 5 and 14 Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 with housing 750 360° all-round enclosure Brass, PC UL 94 V0 Phosphorus bronze Gold over nickel, Au ≥ 0.8 µm, Ni 2.54 µm AWG 27 / AWG 24 0.46 mm / 0.61 mm AWG 24 / AWG 24 0.4 mm / 0.51 mm 0.85 mm...1.05 mm 0...93 % rel. humidity -40 °C...70 °C 500 MΩ ≤ 20 mΩ ≥ 1000 V DC ≥ 1500 V DC 1A conforming to IEEE 802.
RJ45 flange inserts, module 8-wire 4-wire 13,19 • Cat. 6A • IP20 • For housing variants 1, 4, 5, 14 and for FrontCom® 13,19 IP67 plug-in connectors Inserts 1 15,6 1 40, 15,6 40, Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 with housing 750 360° all-round enclosure Zinc diecast Gold over nickel, Au ≥ 0.8 µm AWG 26 / AWG 22 AWG 24 / AWG 22 0.85 mm...1.6 mm IEC 60603-7-51 -40 °C...70 °C conforming to IEEE 802.
Inserts RJ45 flange inserts, coupling IP67 plug-in connectors 8-wire 13,19 • Cat. 6A • IP20 • For housing variants 1, 4, 5, 14 and for FrontCom® 15,6 51 32, Technical data Cat.6A / Class EA (ISO/IEC 11801 2010) IP67 with housing 750 360° all-round enclosure Zinc diecast Gold over nickel, Au ≥ 0.8 µm Category Protection degree Plugging cycles Shielding Housing main material Contact surface Connection cross-section, flexible, min. / max. Connection cross-section, solid, min. / max.
Plug inserts Hybrid Crimp • Cat. 5 • IP20 • For housing variants 1 (metal) and 14 8.9 IP67 plug-in connectors Inserts 36.7 12.8 Technical data Cat.5 (ISO/IEC 11801) IP67 with housing 500 360° all-round enclosure Nickel silver, PA 66 Gold over nickel 10 AWG 27 / AWG 20 0.08 mm² / 0.75 mm² 1 mm...2.2 mm -40 °C...70 °C < 10 mΩ 3 A per contact 24 V ≤ 5 mΩ CULUS Category Protection degree Plugging cycles Shielding Housing main material Contact surface No.
Inserts Flange inserts Hybrid IP67 plug-in connectors Module 13.1 • Cat. 5 • IP20 • For housing variants 1 (metal) and 14 44.5 15.5 Technical data Cat.5 (ISO/IEC 11801) IP67 with housing 500 360° all-round enclosure Zinc diecast, Nickel silver, PA 66 Gold over nickel 10 AWG 27 / AWG 20 0.08 mm² / 0.75 mm² 1 mm...2.2 mm 3 A per contact 24 V ≤ 10 mΩ < 10 mΩ -40 °C...70 °C CULUS Category Protection degree Plugging cycles Shielding Housing main material Contact surface No.
IP67 plug-in connectors Inserts Flange inserts USB Coupling USB A/A Coupling USB A/B IP67 with housing 360° all-round enclosure -40 °C...70 °C USB A / USB A IEC 61076-3-107 CULUS; GERMLLOYD IP67 with housing 360° all-round enclosure -40 °C...
Inserts Plug inserts SC, fibre optics Plug inserts SC, POF IP67 plug-in connectors Plug inserts SC only for V14 • IP20 • For variant 1, 4 and 14 housings 9.7 13. 2 9.7 13. 2 54 7 55. 54 7 55. Technical data IP67 with housing Zinc diecast, PA 1000 -40 °C...
Flange inserts SC Flange inserts SC • IP20 • SC-RJ on 2 SC • For variant 1, 4 and 14 housings 13.19 IP67 plug-in connectors Inserts 17.8 33.9 Technical data Protection degree Housing main material Plugging cycles Ambient temperature (operational) Approvals Note IP67 with housing PA 1000 -40 °C...70 °C Ordering data Flange insert Note Accessories Singlemode Multimode/POF Type IE-BI-SCRJ2SC-SM-C IE-BI-SCRJ2SC-MM-C Qty. 10 1 Order No. 1962870000 1964430000 Type Qty. Order No. J Note J.
Inserts Plug inserts LC IP67 plug-in connectors Plug inserts LC 9.5 • IP20 • For variant 1, 4 and 14 housings 5 14. 3 31. .1 59 13. 15 Technical data IP67 with housing PBT diecast zinc 1000 -40 °C...70 °C IEC 61754-20 EAC Protection degree Housing main material Plugging cycles Ambient temperature (operational) Connector standard Approvals Note Ordering data Plug insert Note Singlemode Multimode Type IE-PI-2LC-SM IE-PI-2LC-MM Qty. 10 10 Order No.
Flange inserts LC Flange inserts LC • IP20 • For variant 1, 4 and 14 housings 9.3 IP67 plug-in connectors Inserts 15.9 30.9 Technical data IP67 with housing PBT diecast zinc 1000 -40 °C...70 °C IEC 61754-20 Protection degree Housing main material Plugging cycles Ambient temperature (operational) Connector standard Approvals Note Ordering data Flange insert Note Singlemode Multimode Accessories Tools J Crimping pliers GOF LC Type IE-BI-LCD-SM-C IE-BI-LCD-MM-C Qty. 10 10 Order No.
J 2596860000 J.
IP67 plug-in connectors PushPull Power Plug PushPull Power Plug Power 24 V Technical data General data Protection degree Connector standard Ambient temperature (operational) No. of poles Wire connection cross-section, flexible, min./max. Sheath diameter, min. / max.
PushPull Power Flanges PushPull Power IP67 plug-in connectors Flange Power 24 V Technical data General data Protection degree Connector standard Ambient temperature (operational) No. of poles Connection diameter, flexible, min. / max.
J J.
IP65 connection components / FreeCon connecting components Contents IP65 connection components / FreeCon connectivity components Overview IP65 connection components / FreeCon connecting components FreeCon Passive V14 K.2 FreeCon Active PROFINET K.9 FreeCon Contactless Power K.11 V1 junction boxes K.12 V4 junction boxes K.14 V5 junction boxes K.16 V6 junction boxes K.17 K 2596860000 K.
FreeCon V14 - junction box Double junction box, Power / RJ45 Single junction box, RJ45 52 41 52 41 IP65 connection components / FreeCon connecting components FreeCon Passive V14 68 80 29 41 103.2 98.8 Technical data General data Housing main material Protection degree Ambient temperature (operational) Connector standard Approvals Technical specifications power connector Housing base material Sealing material Contact material Contact carrier material Contact surface Plugging cycles No.
FreeCon V14 - single junction box RJ45 cable coupling IP65 connection components / FreeCon connecting components FreeCon Passive V14 PushPull Power cable coupling Technical data General data Housing main material Protection degree Ambient temperature (operational) Connector standard Approvals Technical specifications power connector Housing base material Sealing material Contact material Contact carrier material Contact surface Plugging cycles No. of poles Sheath diameter, min. / max.
FreeCon V14 - coupling Double coupling, Power / RJ45 Single coupling, RJ45 52 41 52 41 IP65 connection components / FreeCon connecting components FreeCon Passive V14 68 80 29 41 61 60.4 Technical data General data Housing main material Protection degree Ambient temperature (operational) Connector standard Approvals Technical specifications power connector Housing base material Sealing material Contact material Contact carrier material Contact surface Plugging cycles No.
FreeCon V14 single coupling IP65 connection components / FreeCon connecting components FreeCon Passive V14 52 41 Single coupling, SCRJ 29 41 43.
Y-distributor, Power Single coupling, Power 90 3.54" 80 3.15" 61 2.45" 62 52 41 80 68 M4 52 41 FreeCon V14 - Power 48 1.
FreeCon V14 - junction box Hybrid cable coupling Single junction box, Hybrid IP65 connection components / FreeCon connecting components FreeCon Passive V14 Technical data General data Housing main material Protection degree Ambient temperature (operational) Approvals Technical specifications hybrid connector Housing base material Sealing material Contact material Contact surface Plugging cycles Pole count Connection cross-section, flexible, min. / max.
IP65 connection components / FreeCon connecting components FreeCon Passive V14 FreeCon V14 single coupling Single coupling, hybrid 41 29 M4 41 52 142 Technical data General data Housing main material Protection degree Ambient temperature (operational) Technical specifications hybrid connector Housing base material Sealing material Contact material Contact surface Plugging cycles Electrical properties hybrid connector Rated current (hybrid connector) Rated voltage (DIN EN 61984) Contact resistance P
POF media converter 68 80 112 60 130.2 97.8 53 41 60 130.2 97.8 53 41 4.5 POF repeater 4.
IP65 connection components / FreeCon connecting components FreeCon Active PROFINET FreeCon Active PROFINET with diagnostics functionality POF repeater Copper repeater CU CU ACT2 LNK1 US2 US1 LNK2 ACT1 Technical data General data Housing main material Weight Data interface Power interface Protection degree Ambient temperature (operational) Network standard Connector standard Electrical data Operating voltage Operational voltage range Current consumption Baud rate Protocol LED indicator Approvals Not
FreeCon Contactless Primary side (base) IP65 connection components / FreeCon connecting components FreeCon Contactless Power Secondary side (remote) 100 22 100 M4 44 19.5 47 M4 19.
IP65 connection components / FreeCon connecting components V1 junction boxes V1 junction boxes - plastic Single junction box 41.8 1.65" CA. 65.2 CA. 2.58" CA. 114 CA. 4.5" 64 2.52" Technical data Protection degree Housing main material Plugging cycles Ambient temperature (operational) Connector standard Sheath diameter min. / max. Approvals Note IP67 PA UL 94 V0 750 -40 °C...70 °C IEC 61076-3-106 Var. 1 6 mm / 9.
V1 junction boxes - metal Double junction box IP65 connection components / FreeCon connecting components V1 junction boxes Single junction box • IP67 • For wall or floor mounting 125 113 106 72 80 52 80 52 72 75 63 56 113 63 Technical data IP67 Al - Si 12 Grey Floor-mounted, Wall mounting -40 °C...70 °C 750 IEC 61076-3-106 Var.
IP65 connection components / FreeCon connecting components V4 junction boxes FreeCon V4 junction boxes Single coupling, RJ45 Single junction box 61,6 2.43" 52 41 41,8 1.65" 97,7 3.85" 106,9 4.21" 61.2 29 41 64 2.52" Technical data General data Plugging cycles Housing main material Contact surface UL 94 flammability rating Connector standard Protection degree Ambient temperature (operational) Sheath diameter min. / max.
V4 junction boxes Double junction box IP65 connection components / FreeCon connecting components V4 junction boxes Single junction box • IP67 • For wall or floor mounting 125 113 106 72 80 52 80 52 72 75 63 56 113 63 Technical data IP67 Al - Si 12 Grey Floor-mounted, Wall mounting -40 °C...70 °C 750 IEC 61076-3-106 Var.
V5 junction boxes Double junction box Single junction box • IP67 • For wall or floor mounting 125 113 106 80 52 80 52 72 75 63 56 72 IP65 connection components / FreeCon connecting components V5 junction boxes 113 63 Technical data IP67 Al - Si 12 Grey Floor-mounted, Wall mounting -40 °C...70 °C 750 IEC 61076-3-106 Var.
V6 junction boxes IP65 connection components / FreeCon connecting components V6 junction boxes Single junction box, RJ45 54 64 5 64 74 • Cat. 6 • IP67 8.5 Technical data Protection degree Housing main material Colour Type of mounting IP67 PA 66, UL 94: V-0 Light Grey Floor-mounted, for exposed connections, Wall mounting Configuration Screw-on junction box including RJ45 module with IDC connection EIA/TIA T568 A, EIA/TIA T568 B -40 °C...70 °C 750 IEC 61076-3-106 Var. 6 6 mm / 9.
K K.
Copper cabling solutions Contents Copper cabling solutions Overview Copper cabling solutions Introduction AdvancedLine and CabinetLine L.2 Product configurator – Copper cables L.3 Overview – Copper cables L.4 Raw cables – Installation cable L.6 Raw cables – Connection cable L.8 Raw cables – Dragline cable L.13 Raw cables – PROFINET cable L.14 Raw cables – Hybrid cable L.16 Assembled cables – Patch cable L.17 Assembled cables – PROFINET cable L.
Copper cabling solutions Introduction AdvancedLine and CabinetLine The ideal solution, whatever your needs Our AdvancedLine and CabinetLine product ranges AdvancedLine CabinetLine The AdvancedLine from Weidmüller offers all combinations of cables that are possible with the extensive range of plug connections. The new CabinetLine range of patch cables from Weidmüller is available in a variety of colours for visually differentiating between various networks.
Copper cabling solutions Product configurator – Copper cables Configurators for copper cables Tailor-made connections The cable configurator in Weidmüller’s online catalogue makes it possible for you to create fully-assembled cables customised specifically to your requirements and specifications. You have the choice of configuring a cable which is identical on both ends, or with two different mating profiles, or with one end left open. An RJ45 plug with IP20 protection is available.
Copper cabling solutions Overview – Copper cables Overview of copper cables Solutions for every environment Copper cables should be your first choice for applications in offices and harsh industrial environments.
Copper cabling solutions Overview – Copper cables Ordering data for copper cables, metre goods Type Industrial installation cables IE-5IC4x2xAWG24/1-PUR IE-5IC4x2xAWG24/1-PVC IE-7IC4x2xAWG23/1-PUR IE-7IC4x2xAWG23/1-PVC IE-C5AS4Vxx Industrial connecting cables IE-5CC4x2xAWG26/7-PUR IE-5CC4x2xAWG26/7-PVC IE-7CC4x2xAWG26/7-PUR IE-7CC4x2xAWG26/7-PVC IE-C5DS4Vxx IE-C5DHAGxx IE-C7FS8LD-305M IE-C7FS8LB-305M IE-C7FS8LE-305M IE-C7FS8LG-305M IE-C7FS8LR-305M IE-C7FS8LM-305M IE-C7FS8LY-305M Industrial trailing cable
Copper cabling solutions Raw cables – Installation cable Raw cables Installation cable Cat. 5 PUR PVC • In lengths from 100 to 1000 metres Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Raw cables – Installation cable PUR PVC Copper cabling solutions Raw cables Installation cable Cat. 7 • In lengths from 100 to 1000 metres Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Copper cabling solutions Raw cables – Connection cable Raw cables Connecting cable Cat. 5 PUR PVC • In lengths from 100 to 1000 metres Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Raw cables – Connection cable PUR PVC Copper cabling solutions Raw cables Connecting cable Cat. 7 • In lengths from 100 to 1000 metres Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Copper cabling solutions Raw cables – Connection cable Raw cables Connecting cable Cat. 7 LSZH grey LSZH blue • 305 m / 1,000 ft Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Raw cables – Connection cable LSZH green LSZH red System cable Cat.7 (ISO/IEC 11801) S/FTP 4*2*AWG 27/7 - 4*2*0.1 mm² 5.9 mm LSZH Black 1.04 mm 50 mm 25 mm -20 °C...60 °C 0 °C...50 °C No in accordance with IEC 60332-1 System cable Cat.7 (ISO/IEC 11801) S/FTP 4*2*AWG 27/7 - 4*2*0.1 mm² 5.9 mm LSZH Green 1.04 mm 50 mm 25 mm -20 °C...60 °C 0 °C...50 °C No in accordance with IEC 60332-1 System cable Cat.7 (ISO/IEC 11801) S/FTP 4*2*AWG 27/7 - 4*2*0.1 mm² 5.9 mm LSZH Red 1.04 mm 50 mm 25 mm -20 °C...
Copper cabling solutions Raw cables – Connection cable Raw cables Connecting cable Cat. 7 LSZH magenta LSZH yellow • 305 m / 1,000 ft Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Raw cables – Dragline cable PUR green PUR blue Copper cabling solutions Raw cables Dragline cable Cat. 5 • In lengths from 100 to 1000 metres Technical data Dragline cable Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B) SF/UTP 4*2*AWG 26/7 - 4*2*0.128 mm² 6.8 mm PUR green (RAL 6018) 0.95 mm 7.5 *diameter 4 *diameter 5 Mio -40 °C...80 °C -20 °C...60 °C -40 °C...
Copper cabling solutions Raw cables – PROFINET cable Raw cables PROFINET cable Installation cable type A, PVC Connection cable type B, PVC • In lengths from 100 to 1000 metres Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Raw cables – PROFINET cable Dragline cable type C, PUR Torsion cable type C, PUR Copper cabling solutions Raw cables PROFINET cable • In lengths from 100 to 1000 metres Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Copper cabling solutions Raw cables – Hybrid cable Raw cables Hybrid cable PVC • In lengths from 100 to 1000 metres Technical data Product type Category Shielding Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Assembled cables - Patch cable Assembled cables Patch cable CabinetLine Cat. 6 straight 5- Copper cabling solutions LSZH grey ZKLWH RUDQJH RUDQJH ZKLWH JUHHQ EOXH ZKLWH EOXH JUHHQ ZKLWH EURZQ EURZQ 5- Technical data Product type Category Shielding Version connector left / Version connector right Connector standard PoE / PoE+ Cross-section Sheath diameter, max. Material sheath Colour Insulation diameter Min. bending radius, repetitive Min.
Copper cabling solutions Assembled cables - Patch cable Assembled cables Patch cable CabinetLine Cat.
Assembled cables - Patch cable LSZH green 5- LSZH red ZKLWH RUDQJH RUDQJH ZKLWH JUHHQ EOXH ZKLWH EOXH JUHHQ ZKLWH EURZQ EURZQ 5- 5- Copper cabling solutions Assembled cables Patch cable CabinetLine Cat.
Copper cabling solutions Assembled cables - Patch cable Assembled cables Patch cable CabinetLine Cat.
Assembled cables - Patch cable LSZH grey 270° 5- LSZH grey 90° ZKLWH RUDQJH RUDQJH ZKLWH JUHHQ EOXH ZKLWH EOXH JUHHQ ZKLWH EURZQ EURZQ 5- 5- Copper cabling solutions Assembled cables Patch cable CabinetLine Cat.
Copper cabling solutions Assembled cables - Patch cable Assembled cables Patch cable CabinetLine Cat. 6 crossover LSZH grey RJ45 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 RJ45 Technical data Product type Category Shielding Version connector left / Version connector right Connector standard PoE / PoE+ Cross-section Sheath diameter, max. Material sheath Colour Insulation diameter Min. bending radius, repetitive Min.
Assembled cables - Patch cable PVC green 5- PUR green ZKLWH RUDQJH RUDQJH ZKLWH JUHHQ EOXH ZKLWH EOXH JUHHQ ZKLWH EURZQ EURZQ 5- 5- Copper cabling solutions Assembled cables Patch cable CabinetLine Cat.
Copper cabling solutions Assembled cables - Patch cable Assembled cables Patch cable CabinetLine Cat. 6 straight PUR green 5- ZKLWH RUDQJH RUDQJH ZKLWH JUHHQ EOXH ZKLWH EOXH JUHHQ ZKLWH EURZQ EURZQ 5- Technical data Product type Category Shielding Version connector left / Version connector right Connector standard PoE / PoE+ Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Assembled cables - PROFINET cable RJ45 IP20 5- RJ45 IP20 incl. protective cap 5- \HOORZ RUDQJH ZKLWH EOXH 5- Copper cabling solutions Assembled cables Patch cable PROFINET dragline cable (type C) Cat. 5 IP20 5- \HOORZ RUDQJH ZKLWH EOXH Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Insulation diameter Min. bending radius, repetitive / Min.
Copper cabling solutions Assembled cables - PROFINET cable Assembled cables Patch cable PROFINET connecting cable (Type B) Cat.5 IP20 RJ45 IP20 Crimp 5- 5- \HOORZ RUDQJH ZKLWH EOXH Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Insulation diameter Min. bending radius, repetitive / Min.
Assembled cables - PROFINET cable V14 RJ45 IP67 5- Copper cabling solutions Assembled cables Patch cable PROFINET dragline cable (type C) Cat. 5 IP67 5- \HOORZ RUDQJH ZKLWH EOXH Technical data Product type Category Connector standard Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Insulation diameter Min. bending radius, repetitive / Min.
Copper cabling solutions Assembled cables - PROFINET cable Assembled cables Patch cable PROFINET (Type C) Cat. 5, overmoulded IP67 V14 RJ45 IP67 V14 RJ45 IP67 Dragline cable Twisted cable 5- 5- \HOORZ RUDQJH ZKLWH EOXH 5- 5- \HOORZ RUDQJH ZKLWH EOXH Technical data Product type Category Connector standard Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Insulation diameter Min.
Assembled cables – PROFINET cable PushPull Power Power IP67, PVC Power IP67, PUR Copper cabling solutions Assembled cables Patch cable PushPull Power Technical data Connector standard Version connector left / Version connector right Ambient temperature (operational) Cross-section Wire connection cross section AWG, max. Sheath diameter, max. Material sheath Sheathing colour Insulation No. of wires Min.
Copper cabling solutions Assembled cables – PROFINET cable M12 Assembled cable Dragline cable M12 • Cat. 5 • PUR • D-coded • PROFINET type C M12 - M12 M12 - M12 Plug / plug Plug / socket M12 1 2 3 4 yellow white orange blue M12 M12 1 2 3 4 1 2 3 4 M12 yellow white orange 1 2 3 4 blue Technical data Dragline cable Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B) SF/UTP M12 D-code – IP67 straight pin / M12 D-code – IP67 straight pin 4*AWG 22/7 - 0.36 mm² 6.7 mm PUR green (RAL 6018) 1.5 mm 7.
Assembled cable Dragline cable M12 • Cat. 5 • PUR • D-coded • PROFINET type C M12 - open M12 - RJ45 Plug / - Plug / plug yellow white orange blue M12 RJ45 1 2 3 4 1 3 2 6 Copper cabling solutions Assembled cables – PROFINET cable M12 M12 yellow white orange 1 2 3 4 blue Technical data Dragline cable Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B) SF/UTP M12 D-code – IP67 straight pin / Open 4*AWG 22/7 - 0.36 mm² 6.7 mm PUR green (RAL 6018) 1.5 mm 7.
Copper cabling solutions Assembled cables – PROFINET cable M12 Assembled cables M12 dragline cable, angled • Cat. 5 • PUR • D-coded • PROFINET type C M12 - M12 M12 - M12 Plug / plug Plug / plug Technical data Product type Category Shielding Version connector left / Version connector right Dragline cable Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B) SF/UTP M12 D-code – IP67 straight pin / M12 D-code – IP67 straight pin Dragline cable Cat.5 (ISO/IEC 11801) / Cat.
Assembled cables – PROFINET cable M12 Assembled cables M12 dragline cable, angled Copper cabling solutions M12 - open Plug / - • Cat. 5 • PUR • D-coded • PROFINET type C Technical data Product type Category Shielding Version connector left / Version connector right Dragline cable Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B) SF/UTP M12 D-code – IP67 angled pin / Open Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter, min. / max. Min.
Copper cabling solutions Assembled cables – PROFINET cable M12 Assembled cables System cable M12 flange • Cat. 5 • PUR • D-coded • PROFINET type B M12 flange - M12 male M12 flange - RJ45 Plug / socket Plug / socket M12 1 2 3 4 yellow white orange blue M12 M12 1 2 3 4 1 2 3 4 M12 yellow white orange 1 2 3 4 blue Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max.
Assembled cables – PROFINET cable M12 Assembled cables System cable M12 flange Copper cabling solutions M12 flange - open Socket / - • Cat. 5 • PUR • D-coded • PROFINET type B M12 yellow white orange 1 2 3 4 blue Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min. bending radius, repetitive Min.
Copper cabling solutions Assembled cables – PROFINET cable M12 Assembled cable Connecting cable M12 • Cat.
Assembled cables – EtherNet/IP Assembled cables M12 connecting cables Plug / plug • Cat. 6 • PUR • X-type 4 5- 3 5 1 6 2 7 Copper cabling solutions M12 - RJ45 8 :KLWH 2UDQJH 2UDQJH :KLWH *UHHQ %OXH :KLWH %OXH *UHHQ :KLWH %URZQ %URZQ 0 Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min.
Copper cabling solutions Assembled cables – EtherNet/IP Assembled cables EtherNet/IP patch cable V1 RJ45 IP67 - metal V1 RJ45 IP67 - plastic • in PUR 5- ZKLWH RUDQJH RUDQJH ZKLWH JUHHQ EOXH ZKLWH EOXH JUHHQ ZKLWH EURZQ EURZQ 5- 5- ZKLWH RUDQJH RUDQJH ZKLWH JUHHQ EOXH ZKLWH EOXH JUHHQ ZKLWH EURZQ EURZQ 5- Technical data Product type Category Shielding Version connector left / Version connector right Cross-section
Assembled cable Railway cable M12 • Cat. 5 • Radox • D-coded M12 - M12 M12 - M12 Plug / plug Plug / socket M12 1 2 3 4 yellow white orange blue M12 M12 1 2 3 4 1 2 3 4 Copper cabling solutions Assembled cables - Railway cable M12 M12 yellow white orange 1 2 3 4 blue Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min.
Copper cabling solutions Assembled cables - Railway cable M12 Assembled cable Railway cable M12 M12 - open Plug / - • Cat. 5 • Radox • D-coded M12 yellow white orange 1 2 3 4 blue Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min.
Assembled cables Railway cable M12 • Cat. 5 • Radox • D-coded M12 - M12 M12 - M12 Plug / plug Plug / plug M12 1 2 3 4 yellow white orange blue M12 M12 1 2 3 4 1 2 3 4 Copper cabling solutions Assembled cables - Railway cable M12 M12 yellow white orange 1 2 3 4 blue Technical data Product type Category Shielding Version connector left / Version connector right System cable Cat.5 (ISO/IEC 11801) / Cat.
Copper cabling solutions Assembled cables - Railway cable M12 Assembled cables Railway cable M12 M12 – open Plug / - • Cat. 5 • Radox • D-coded M12 yellow white orange 1 2 3 4 blue Technical data Product type Category Shielding Version connector left / Version connector right System cable Cat.5 (ISO/IEC 11801) / Cat.5e (TIA T568-B) SF/UTP M12 D-code – IP67 angled pin / Open Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter, min. / max. Min.
Assembled cables Railway cable RW M12 • Cat. 5 • Radox • D-coded • RW (reduced wire): suitable for RJ45 connectors M12 – open M12 - RJ45 Plug / - Plug / plug yellow white orange blue M12 RJ45 1 2 3 4 1 3 2 6 Copper cabling solutions Assembled cables - Railway cable M12 M12 yellow white orange 1 2 3 4 blue Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max.
Copper cabling solutions Assembled cables – Railway cable RJ45 Assembled cables Railway cable RJ45 - RJ45 RJ45 - RJ45 Plug / plug • Cat. 5 • Radox • RW (reduced wire) 5- 5- \HOORZ RUDQJH ZKLWH EOXH Technical data Product type Category Shielding Version connector left / Version connector right Cross-section Sheath diameter, max. Material sheath Sheathing colour Insulation diameter Min.
Assembled cables - USB cable USB A - USB A USB A - USB Micro Copper cabling solutions Assembled cables USB cable Technical data Sheathing colour Material sheath Version connector left Version connector right Ambient temperature (operational) Note Black PVC USB A USB A -15 °C...80 °C Ordering data Note Accessories 0.5 m 1.0 m 1.5 m 1.8 m 3.0 m Black PVC USB A USB Micro -15 °C...80 °C Type IE-USB-A-A-0.5M IE-USB-A-A-1.0M IE-USB-A-A-1.5M IE-USB-A-A-1.8M IE-USB-A-A-3.0M Qty. 1 1 1 1 1 Order No.
Copper cabling solutions Assembled cables - USB cable Assembled cables USB cable USB A 3.0 - USB A 3.0 Technical data Sheathing colour Material sheath Version connector left Version connector right Ambient temperature (operational) Note Blue PVC USB A 3.0 USB A 3.0 -15 °C...80 °C Ordering data Note Accessories 0.5 m 1.8 m 3.0 m 5.0 m Type IE-USB-3.0-A-A-0.5M IE-USB-3.0-A-A-1.8M IE-USB-3.0-A-A-3M IE-USB-3.0-A-A-5M Qty. 1 1 1 1 Order No. 2581730005 2581730018 2581730030 2581730050 Type Qty.
Fibre-optic cabling solutions Contents Fibre-optic cabling solutions Overview Fibre-optic cabling solutions Overview – Fibre-optic cables M.2 Product configurator – Fibre-optic cables M.4 Raw cables – FO connection cable / dragline cable M.5 Assembled cables – FO patch cable M.7 Assembled cables – FO PROFINET cable M.12 Assembled cables – FO dragline cable M.13 M 2596860000 M.
Fibre-optic cabling solutions Overview – Fibre-optic cables Overview – Fibre-optic cables First choice for industry Fibre-optic cables are the best option for working in harsh industrial environments, especially if you: • Need long transmission paths (up to 120 km!) • Need to take account of EMC issues Must ensure electrical isolation in the case of • potential differences Raw cables Assembled cables Industrial fibre-optic dragline cable Industrial FO patch cables For flexible installations in and
Fibre-optic cabling solutions Overview – Fibre-optic cables Ordering data for Fibre-optic cables (FO), sold by the metre Type Breakout/ Zipcord GOF dragline, standard temperature range IE-FM5D2UE-MW Breakout IE-FM6D2UE-MW Breakout GOF dragline, extended temperature range IE-FM5C2UE-MW Breakout IE-FM6C2UE-MW Breakout POF IE-FPOZ2EE-MW Zipcord IE-FPOD2UE-MW Breakout, black IE-FPOD2UG-MW Breakout, green Plug-in connector left right Length - - Metre goods 8946000000 8956060000 - - 8956070000 89560500
Fibre-optic cabling solutions Product configurator – Fibre-optic cables Configurators for fibre-optic cables Tailor-made connections The cable configurator in Weidmüller‘s online catalogue makes it possible for you to create a fully-assembled cable adapted to your requirements and specifications. You then have the choice of configuring a cable which is identical on both ends, or with two different mating profiles, or with one end left open.
Raw cables Dragline cable Fibre-optic cabling solutions Raw cables – FO connection cable / dragline cable Dragline cable Extended temperature range •M ultimode glass optical fibre • Customisable Technical data Product type Cable layout Sheath diameter Material sheath Sheathing colour Min. bending radius, repetitive Min.
Fibre-optic cabling solutions Raw cables – FO connection cable / dragline cable Raw cables Zipcord Breakout • Polymer optical fibre • Customisable Technical data Product type Cable layout Sheath diameter Material sheath Insulation Min. bending radius, repetitive Min. bending radius, once only Bending cycles Ambient temperature (operational) Fibre type Bandwidth Attenuation Core diameter Installation temperature Storage temperature Halogen Approvals Note Connecting cables ZIPCORD 2.2*4.
Assembled cables CabinetLine FO patch cable SC-Duplex / SC-Duplex Fibre-optic cabling solutions Assembled cables - FO patch cable ST / ST •M ultimode glass optical fibre • LSZH outer cladding Technical data Patch cable, duplex clip included ZIPCORD 2.8 * 5.7 mm LSZH Orange -20 °C...70 °C Product type Cable layout Sheath diameter Material sheath Sheathing colour Ambient temperature (operational) Installation temperature Storage temperature Approvals Note Ordering data Core 62.5 µm.
Fibre-optic cabling solutions Assembled cables - FO patch cable Assembled cables CabinetLine FO patch cable LC-Duplex / LC-Duplex •M ultimode glass optical fibre • LSZH outer cladding Technical data Patch cable, duplex clip included ZIPCORD 2.0 * 4.1 mm LSZH Orange -20 °C...70 °C Product type Cable layout Sheath diameter Material sheath Sheathing colour Ambient temperature (operational) Installation temperature Storage temperature Approvals Note Ordering data Core 62.5 µm.
Assembled cables CabinetLine FO patch cable Fibre-optic cabling solutions Assembled cables - FO patch cable LC-Duplex / LC-Duplex • Singlemode glass optical fibre • LSZH outer cladding Technical data Patch cable, duplex clip included ZIPCORD 2.0 * 4.1 mm LSZH Yellow -20 °C...70 °C Product type Cable layout Sheath diameter Material sheath Sheathing colour Ambient temperature (operational) Installation temperature Storage temperature Approvals Note Ordering data Core 9 µm. OS2 Note 0.5 m 1.0 m 2.
Fibre-optic cabling solutions Assembled cables - FO patch cable Assembled cable FO patch cable SC-Duplex / SC-Duplex ST / ST •M ultimode glass optical fibre • PVC outer cladding Technical data Pre-assembled patch cable, crossover ZIPCORD 3*6 mm PVC Orange -5 °C...75 °C -5 °C...50 °C -25 °C...
Assembled cable FO patch cable ST / SC-Duplex Fibre-optic cabling solutions Assembled cables - FO patch cable LC-Duplex / LC-Duplex •M ultimode glass optical fibre • PVC outer cladding Technical data Pre-assembled patch cable, crossover ZIPCORD 3*6 mm PVC Orange -5 °C...75 °C -5 °C...50 °C -25 °C...75 °C Product type Cable layout Sheath diameter Material sheath Sheathing colour Ambient temperature (operational) Installation temperature Storage temperature Approvals Note Ordering data Core 62.
Fibre-optic cabling solutions Assembled cables - FO PROFINET cable Assembled cable FO patch cable PROFINET SC-RJ / SC-RJ • Polymer optical fibre Technical data Product type Version connector left / Version connector right Cable layout Sheath diameter Insulation Sheathing colour Fibre type Core diameter Ambient temperature (operational) Attenuation Insertion loss Bandwidth Halogen Approvals Note Connecting cables SCRJ IP20 / SCRJ IP20 ZIPCORD 2.2*4.5 mm PE Black POF 980 µm -20 °C...
Assembled cables FO dragline cable Fibre-optic cabling solutions Assembled cables - FO dragline cable LC-Duplex / LC-Duplex •M ultimode glass optical fibre Technical data Dragline cable LC-Duplex IP20 / LC-Duplex IP20 Break-out dragline 6 mm PUR Black -40 °C...80 °C -20 °C...60 °C -40 °C...
Fibre-optic cabling solutions Assembled cables - FO dragline cable Assembled cable FO dragline cable SC-Duplex / SC-Duplex ST / ST •M ultimode glass optical fibre Technical data Dragline cable Break-out dragline 6 mm PUR Black -40 °C...80 °C -20 °C...60 °C -40 °C...80 °C Product type Cable layout Sheath diameter Material sheath Sheathing colour Ambient temperature (operational) Installation temperature Storage temperature Approvals Note Ordering data Core 62.5 µm.
Assembled cables FO dragline cable with extended temperature range Fibre-optic cabling solutions Assembled cables - FO dragline cable SC-Duplex IP67 •M ultimode glass optical fibre Technical data Dragline cable Break-out dragline SC IP67 bayonet V01 metal / SC IP67 bayonet V01 metal 7.5–8 mm PUR Black GOF, Multimode, OM1 200 MHz*km at 850 nm, 500 MHz*km at 1300 nm 2.7 dB/km at 850 nm, ≤ 0.5 dB/km at 1300 nm -40 °C...85 °C -55 °C...60 °C -55 °C...
Fibre-optic cabling solutions Assembled cables - FO dragline cable Assembled cables FO dragline cable SC-Duplex IP67 • Singlemode glass optical fibre Technical data Product type Cable layout Version connector left / Version connector right Sheath diameter Material sheath Sheathing colour Fibre type Bandwidth Insertion loss Attenuation Ambient temperature (operational) Installation temperature Storage temperature Approvals Note Dragline cable Break-out dragline SC IP67 PushPull V14 metal / SC IP67 Pus
Accessories – Passive components Contents Passive components Overview of accessories Accessories – Passive components Introduction N.2 Connection system N.3 Copper cabling tools N.4 Fibre-optic cabling tools N.10 General tools N.15 Cabtite cable entry system N.17 Protective caps N.20 Inkjet printer N.21 Markers for cables and STEADYTEC ® N.23 Surge protection for data interfaces N.24 N 2596860000 N.
Accessories – Passive components Introduction Overview of accessories Everything from a single source Cable connector Cabtite Connection, repair or extension of Industrial Ethernet cables to Cat.
Cable connector class 7 Accessories - Passive components Connection system Cable connector Technical data Category Protection degree Connection 1 / 2 Housing main material Ambient temperature (operational) Current-carrying capacity at 50 °C Rated voltage Insulation resistance Shielding Connection diameter, flexible, min. / max. Connection cross-section, flexible, min. / max. Connection diameter, solid, min. / max. Connection cross-section, solid, min. / max. Insulation cross-section, max.
Accessories – Passive components Copper cabling tools Stripping tools N AM 12 Stripping tool for round (shielded) data cables of Ø 2.5...8 mm • Specially designed for Ethernet cables • Strips sheathing and cuts shield in one operation • Blue blade cartridge included in delivery • Cutting of UTP and STP data cables and other flexible copper cables with a diameter of up to 4 mm2 (~AWG11) • Stripping of the outer insulations of UTP and STP data cables and other round cables with Ø 0.5 ... 12.
Accessories – Passive components Copper cabling tools TT 8 RS MP 8 Pressing tools • Press (punch-down) tool for Ethernet connectors • Ratchet for precise crimping • Release option in the event of incorrect operationg For 8-pole shielded RJ45 plug • AWG 27...24 Technical data Description of contact No. of poles Tool data Length Weight Note Ordering data Version TT 8 RS MP 8 8 mm g 255 1251 Type TT 8 RS MP 8 Qty. 1 Order No. 9202800000 N Note 2596860000 N.
Accessories – Passive components Copper cabling tools Pressing tools PWZ RJ45 • Optional crimping tool for Ethernet connectors to facilitate the joining of the upper and lower parts of the RJ45 plug/module Technical data Tool data Weight g PWZ RJ45 367 Note Ordering data Version N Type PWZ RJ45 Qty. 1 Order No. 1118040000 Note N.
Cable Tester Test devices for testing Ethernet cables, including remote box Accessories – Passive components Copper cabling tools LAN USB TESTER IE-CT • Indication of connection errors: Connection error Interrupt Short-circuit Permutation • Network cable tester for LAN and USB connections • Indication of connection errors: Connection error Interrupt Short-circuit Permutation Wire mix-up (split pair) External voltage • External voltage resistance: 80 V AC / DC Technical data Display Supply Type of
Accessories – Passive components Copper cabling tools Cutting tools • The cutting blade design for different cable sizes increases the quality of the cuts for smaller crosssections • Not suitable for steel wires, steel-armoured cables, aluminium alloys and hard-drawn copper conductors! • Cutting without deformation of the conductor • Do not cut live conductors • Individually tested protective insulation, 1000V, VDE and GS tested in accordance with EN/IEC 60900 • Optimised handle ergonomics • Minim
SEE ESD 120 Electronic ESD diagonal-cutting pliers with pointed head • Hard wire (spring wire or steel nails): 0.4 mm/AWG 26 • Semi-hard wire (iron or nails): 1.0 mm/AWG 18 • Soft wire (copper or aluminium): 1.5 mm/AWG 15 Ordering data Type SEE ESD 120 Technical data Weight SEE ESD 125 Ordering data • Semi-hard wire (iron or nails): 0.8 mm/AWG 20 • Soft wire (copper or aluminium): 1.
Accessories – Passive components Fibre-optic cabling tools Crimping tools Cutting, stripping and crimping tools for processing POF fibres in compliance with IEC 60793-2 A4A fibres (1000 µm/980 µm POF) • Multifunction tool for POF fibres • Processing the duplex POF fibres • Stripping tool for processing POF fibres and cables • The new set of blades for POF cables makes stripping the outer covering and the POF fibres simple • Cable shears specially designed for aramid fibres • Only for cutting aramid
Crimping tools • Ratchet for precise crimping • Release option in the event of incorrect operation • With end stop for exact positioning of the contacts Accessories – Passive components Fibre-optic cabling tools HTX-IE-POF SCISSOR Kevlar • Only one tool needed for all SC-RJ plug processing steps • For processing 1 mm thick polymer optical fibres, especially for the PROFINET and EtherNet/IP-SC-RJ connectors • For stripping Duplex polymer optical fibres • The plug is crimped and the polymer optic
Accessories – Passive components Fibre-optic cabling tools Crimping tools for other contacts • Ratchet for precise crimping • Release option in the event of incorrect operation IE-CT-SC-GOF / IE-CT-LC-GOF Crimping tools for IP20 + 67 connectors • For fibre-optic SC/ST, IP20 and IP67 connectors • For fibre-optic LC and IP67 connectors Technical data Tool data Length Weight Note Ordering data Version N IE-CT-SC-GOF 250 730 IE-CT-LC-GOF 250 730 Type IE-CT-SC-GOF IE-CT-LC-GOF Qty. 1 1 Order No.
Crimping tool for other contacts Accessories – Passive components Fibre-optic cabling tools HTF HYB Ratchet for precise crimping • • Release option in the event of incorrect operation • With end stop for exact positioning of the contacts • Contact and insulation are crimped in one step 0.08…1.
Accessories – Passive components Fibre-optic cabling tools Special stripping tools LWL-stripax® • Quick and accurate stripping • No need to adjust cutting depth • No damage to inner conductors Stripping and cutting tool for plastic fibre-optic cables with 1-mm diameter inner conductor • Stripping length adjustable via end stop • Automatic opening of the clamping jaws after stripping Technical data Max. stripping performance Cable type Conductor diameter Stripping length, max.
Incision tool for twisted-pair cable For connecting twisted-pair cable to terminal rails with IDC contacts e.g. in main and floor distributors, and in modular wall junction boxes for structured building cabling. Accessories – Passive components General tools PDT IE-FISP-V4 The punch-down tool has the following features: Fastening tool for the hexagon cap nut from STEADYTEC® V4 flange and FrontCom® Micro.
Accessories – Passive components General tools IE-KO-HAT Hydraulic sheet holes Incl. accessories: • 1 hydraulic screw Ø 19 mm • 1 hydraulic screw Ø 19 x 9.
HDC KT – Cable grommets, small Accessories – Passive components Cabtite cable entry system HDC KT – Cable grommets, small Cable grommets, small, grey Cable grommets, small, black Technical data Material Colour Temperature range Ingress protection class UL 94 flammability rating Note Ordering data Note free from elastomers, halogens and silicone grey -40 °C to +90 °C (static) elastomers with very high chemical resistance black -30 °C to +90 °C (static) V0 HB Type Clamping range [mm] HDC KT 5 5-6
Accessories – Passive components Cabtite cable entry system HDC KEL 16 Cable entry strip KEL 16/8 with 8 small grommets KEL 16/4 with closed half-shell for 4 small grommets 147 130 147 130 147 130 58 32 *) with closed half-shell Ø 5.8 Ø 35 (2x) 10 Ø1827770000 15 (2x) Ø 15 (8x) 103 Ø865.8 Ø 15 (8x) 32 58 32 58 32 58 35 120 103 35 1825910000 1825900000 Ø 5.5 35 32 10 10 35 32 130 110 Ø 5.8 Cut-out size 16 35 x 86 mm 120Ø 5.5 103Ø 5.5 120 103 Cut-out size 24 35 x 112 mm Ø 5.
Accessories – Passive components Cabtite cable entry system KVT 32 KVT 32 and locknut for D-Sub 9 KVT 32 Locknut for D-Sub 9 KGM-SUB-D9 Ordering data 21 14 Thread For grommet Qty. small large HDC KVT 32 M 32 x 1.5 1 – 10 14 37 37 2 37 HDC KVT 6 (2) 14 21 37 14 21 37 Order No. 1826670000 21 HDC KVT 63-1 HDC KVT 63-1 2 M32x1.5 HDC KVT 32 37 Type HDC KVT 32 M63x1.
Accessories – Passive components Protective caps Dust-protection plugs for protecting empty ports • RJ45 • STEADYTEC® variants • M12 Ordering data Note Dust Cap RJ45 Protective caps IP67 • Dust Cap RJ45 with finger grip • Protective caps for all STEADYTEC® variants and for M12 plug-in connectors Type IE-DPC Qty. 100 Order No.
The advanced inkjet printer Our PrintJet ADVANCED for exacting standards Accessories – Passive components Inkjet printer Flexible printing of plastic and metal markers The PrintJet ADVANCED is an inkjet printer which prints plastic markers in MultiCard format and metal markers from the MetalliCard family. Thanks to its high magazine capacity, it is ideal for printing large volumes in continuous operation.
Accessories – Passive components Inkjet printer PrintJet Advanced Inkjet printer Technical data EAN Length Width Height Weight Net weight Printing method Printer driver Printing speed Print quality Marker type Interface Fueling system Supply voltage Operating system Software 4032248140121 950 mm 555 mm 310 mm 58 kg 37.
Accessories – Passive components Markers for cables and STEADYTEC® Markers for cables and wires Markers for IE-Line STEADYTEC® TM-I for pre-assembled M12 cables SlimFix V0 for cables and wires MultiCard ESG 9/11 K for IE-Line STEADYTEC ® • Ø 4.7 to 6.8 mm SF5/21 • Ø 5.8 to 8.5 mm SF6/21 • 9 x 11 mm • White MultiCard markers for labelling transparent M12 TM-I sleeves Ordering data Type VT SF 5/21 NE WS V0 VT SF 6/21 NE WS V0 Qty. 160 160 Order No.
Accessories – Passive components Surge protection for data interfaces V DATA Cat. 6 - surge protection for 8 wires with RJ45 socket V DATA CAT6 • RJ45 connection • All 4 lines are protected • Robust and compact metal housing • Suitable for Cat. 5 (to 100 MHz) and Cat. 6 to 250 MHz (class E) • Suitable for PoE (IEEE 802.3af) and PoE + (IEEE 802.3at) 5- ,1 5- 287 Technical data N Requirements category acc.
Contents Service and support Service and support Service and support Our expertise for your requirements V.2 Benefit from optimum support when using our products V.4 V 2596860000 V.
Service and support Service and support Our expertise for your requirements Service connects - worldwide Automation technology functions are becoming more complex in a globallyoriented world facing ambitious targets in terms of energy efficiency and smart production. We are your equal partners for the best connections in Industrial Connectivity.
Service and support Service and support Professional advice on planning Our global network of industrial managers has extensive experience in automation technology and electrical connectivity. This expertise allows us to assist you with advice and planning support in order to work with you on resolving the everyday challenges of your applications. Technology and application training Industrial automation is moving towards smart production. It faces the challenges of new technologies and applications.
Service and support Service and support Online support and downloads Exactly the right help and information on our solutions and products If our products are used in your automation technology applications, you need the best possible individual support, from planning through installation to operation. For every stage of your application, we can offer the right tools and information for our products and solutions. Up-to-date, uncomplicated, comprehensive and around the clock via our service portal at www.
Engineering Support Technical data and downloads Commercial support As a developer, you need simple processes and system-wide tools. We support you in your development environment with comprehensive data, software tools and interfaces, product selection guides and development samples. Download all the documents and software relating to our products by simply entering the item number. You can also view our Online Catalogue and research the technical properties of our products.
V V.
Contents Technical appendix Technical appendix Technical appendix Added value for your application Online services W.2 Cable configurator W.3 Service and certificates W.4 Glossary W.6 W 2596860000 W.
Technical appendix Online services Online product catalogue Your digital information source If you have questions about the specifications and details of our products, even when outside normal working hours, then our online catalogue at: http://catalog.weidmueller.com is open 24 hours a day, 365 days a year. As well as product features and part numbers, it contains extensive information on all our product groups. For further information, simply visit our Weidmuller website at: www.weidmueller.
Cable configurator Technical appendix Cable configurator Tailor-made connections The cable configurator allows you to configure your specific cable with comfort, speed and simplicity. Just select, request order – and you are finished! Make your selection from the list of available cables (material for cable sheathing, category, colour, …). Next, choose the connector for both the right and left cable ends and then choose the cable length.
Technical appendix Service and certificates Practical service In-depth planning support Practical Guidelines for Industrial Ethernet 3-D data Are you an electrical engineer, installer or contractor working on Industrial Ethernet installations and in search of assistance, tips or checklists? Our practical guidelines provide detailed descriptions for the implementation of industrial networks.
Service and certificates Do you want to prove to your customer that you have installed only the highest quality components? The GHMT (Society for High-frequency Measuring Technology) and the 3P (Third Party Testing) are independent testing institutes and recognised specialists for industrial cabling. These institutes support the industry by means of test certifications for communication c ables, connection hardware, patch cords and permanent links and channels.
Technical appendix Glossary Glossary Specialist vocabulary for Industrial Ethernet Interest in Industrial Ethernet has produced an entirely new dictionary with specialist terms. Some of the most important terms are briefly explained here. 4B/5B A block encoding system for FDDI and ATM. In 4B/5B encoding, all data is divided into 4-bit units (a nibble) and converted to 5-bit units (symbols) by reference to a matrix. 100BaseFX 100 Mpbs Fast Ethernet, based on 4B/5B encoding with fibre optics.
Technical appendix Glossary Cable material / properties • LSZH LSZH is the abbreviation for Low Smoke Zero Halogen. This material is used in the wire and cable industry for cable sheathing. It consists of a thermoplastic or duroplastic compound. In the event of fire, the LSZH cable only releases very small quantities of toxic and corrosive gases and no halogens. It is mainly used in offices and the IP20 part of the electrical cabinet. The cable is light and environmentally friendly.
Technical appendix Glossary CSMA/CD An access procedure where several network stations have access to the transmission medium. In the CSMA-system the transmitting station listens to the channel (carrier sensing) before it transmits. A station can then only transmit if the transmission medium has not yet been occupied by another station. If the transmission medium is occupied, the station waits till it is free and can transmit.
Technical appendix Glossary FO (Fibre-optic cables) Fibre-optic cables provide an alternative transmission medium to copper. A distinction is made between pure glass fibres (GOF: multimode/singlemode), combined fibres (PCF/HCS) and plastic fibres (POF). They are primarily used because of their insensitivity to electromagnetic interference, but also, in the case GOF, on account of the significantly longer cable lengths compared to copper.
Technical appendix Glossary M12 D-coded M12, D-coded is a 4-pole plug-in connector variation for Industrial Ethernet according to ISO IEC 61076-2-101. It carries out data transmissions according to Cat. 5 and guarantees IP67 protection. M12, X-coded (X-type) M12 X-coded is an 8-pin plug connection variation for Industrial Ethernet according to IEC 61076-2-109. It performs the data transmission as per Cat.6A and ensures protection class IP67.
Technical appendix Glossary OSI OSI are internationally-agreed standards which open systems should work with and define the rules for implementing these norms. Communications systems are a combination of network hardware and network and systems software in a group of networked devices that permit free exchange of information between these devices on the basis of joint protocol agreements and interfaces, independently of the type of these devices or how they are equipped.
Technical appendix Glossary Port Mirroring Port mirroring means that the data traffic of a switch port can be mirrored, in order to detect errors or to measure throughput, onto another port to which a management station can be connected. PPPoE The PPoE (Point to Point Protocol over Ethernet) was developed in order to connect components and LANs to the Internet. It takes advantage of the divided Ethernet environment together with the trusted and secure dial-up access user model from PPP.
Technical appendix Glossary Segment The term segment has many meanings. In networks a segment is a network section delimited by bridges, routers or switches. Where LANs are concerned, a LAN segment or a collision domain is referred to. In token ring networks, it means the transmission section between two neighbouring data stations. In the TCP specifications, a segment describes a single information unit on the communication network.
Technical appendix Glossary Topology The configuration of the network nodes and connections is called the physical topology. The logical connections of network nodes possible are referred to as the logical topology. This states which node pairs can communicate with one another and whether they have a direct physical connection. The physical and logical topology does not have to be identical in networks.
W 2596860000 W.
W W.
Contents Index Index Index Index Type X.2 Index Order No. X.8 Addresses worldwide X.14 X 2596860000 X.
Type Index / Type A 1212770000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 9030060000 N.10 L.6 L.7 L.8 L.9 L.10 L.11 L.12 L.13 L.14 L.15 L.16 L.17 L.18 L.19 L.20 L.21 L.22 L.23 L.24 L.25 L.27 L.28 L.29 L.31 L.40 L.43 N.
IE-BSS-V14M-RJ45-C IE-BSS-V14M-RJ45-C IE-BSS-V14M-RJ45-C IE-BSS-V14M-RJ45-FJ-A IE-BSS-V14M-RJ45-FJ-A IE-BSS-V14M-RJ45-FJ-P IE-BSS-V14M-RJ45-FJ-P IE-BSS-V14M-RJ45-FJ-P IE-BSS-V14M-SCRJ-MM-C IE-BSS-V14M-SCRJ-MM-C IE-BSS-V14M-SCRJ-MM-C IE-BSS-V14M-SCRJ-SM-C IE-BSS-V14M-SCRJ-SM-C IE-BSS-V14M-SCRJ-SM-C IE-BSS-VAPM-24V IE-BSS-VAPM-24V IE-C-IP67 IE-C5AS4V1000 IE-C5AS4V1000 IE-C5AS4V1000 IE-C5AS4VG-MW IE-C5AS4VG-MW IE-C5AS4VG-MW IE-C5CS8UG-MW IE-C5CS8UG-MW IE-C5CS8UG-MW IE-C5CS8VG-MW IE-C5CS8VG-MW IE-C5CS8VG-MW IE-
Index / Type Type X X.
IE-OM-V04P-K11-1S IE-OM-V04P-K21-2S IE-OM-V05M-K11-1S IE-OM-V05M-K21-2S IE-OP-V01P-1S IE-OP-V01P-1S IE-OP-V04P-1S IE-P IE-P-IP67 IE-P63 IE-P70 IE-PCB-M12X-S-180 IE-PCB-M12X-S-90 IE-PCB2-M12X-S-180 IE-PCBR-M12X-S-180 IE-PCBR2-M12X-S-180 IE-PH-AD-V05M-RJ45 IE-PH-RJ45-TH-BK IE-PH-RJ45-TH-BU IE-PH-RJ45-TH-GN IE-PH-RJ45-TH-GY IE-PH-RJ45-TH-OG IE-PH-RJ45-TH-WH IE-PH-RJ45-TH-YE IE-PH-V01M IE-PH-V01M IE-PH-V01M IE-PH-V01M IE-PH-V01M-BP IE-PH-V01M-BP IE-PH-V01M-BP IE-PH-V01M-BP IE-PH-V01P IE-PH-V01P IE-PH-V01P-BP IE
Index / Type Type 2581730018 2581730018 2581730018 2581730030 2581730030 2581730030 2581730030 2581730050 2581730050 2581730050 2581730050 1993550005 1993550005 1993550005 1993550005 1993550005 1993550010 1993550010 1993550010 1993550010 1993550010 1993550015 1993550015 1993550015 1993550015 1993550015 1993550018 1993550018 1993550018 1993550018 1993550018 1993550030 1993550030 1993550030 1993550030 1993550030 1487980000 1504450000 1504450000 1504450000 1504450000 1504440000 1504440000 1504440000 15044400
Index Type X 2596860000 X.
Order No. Type Index / Order No.
1166020150 1166020200 1166030002 1166030005 1166030010 1166030015 1166030020 1166030030 1166030050 1166030100 1166030150 1166030200 1166030250 Type IE-C5ES8VG0150M40M40-G IE-C5ES8VG0200M40M40-G IE-C6FP8LR0002M40M40-R IE-C6FP8LR0005M40M40-R IE-C6FP8LR0010M40M40-R IE-C6FP8LR0015M40M40-R IE-C6FP8LR0020M40M40-R IE-C6FP8LR0030M40M40-R IE-C6FP8LR0050M40M40-R IE-C6FP8LR0100M40M40-R IE-C6FP8LR0150M40M40-R IE-C6FP8LR0200M40M40-R IE-C6FP8LR0250M40M40-R 1170000000 Page L.23 L.23 L.19 L.19 L.19 L.19 L.19 L.19 L.
Order No. Type 1350120200 IE-CSPS5VS0200VAPVAP-X 1362950000 IE-MCT-1RS232/485-1ST 1376510005 1376510010 1376510020 1376510030 1376510050 1376510100 1376510150 1376510200 IE-C5DD4UG0005A2DA2D-E IE-C5DD4UG0010A2DA2D-E IE-C5DD4UG0020A2DA2D-E IE-C5DD4UG0030A2DA2D-E IE-C5DD4UG0050A2DA2D-E IE-C5DD4UG0100A2DA2D-E IE-C5DD4UG0150A2DA2D-E IE-C5DD4UG0200A2DA2D-E L.25 L.25 L.25 L.25 L.25 L.25 L.25 L.
1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718411687 1718431044 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 1718431687 171843
Index / Order No. Order No. X X.
Type Page 8876440030 8876440050 8876440100 8876450010 8876450030 8876450050 8876450100 8876450500 8876451000 8876460010 8876460030 8876460050 8876460100 8879050000 IE-FM6D2UE0003MSD0SD0X IE-FM6D2UE0005MSD0SD0X IE-FM6D2UE0010MSD0SD0X IE-FM5D2UE0001MST0ST0X IE-FM5D2UE0003MST0ST0X IE-FM5D2UE0005MST0ST0X IE-FM5D2UE0010MST0ST0X IE-FM5D2UE0050MST0ST0X IE-FM5D2UE0100MST0ST0X IE-FM6D2UE0001MST0ST0X IE-FM6D2UE0003MST0ST0X IE-FM6D2UE0005MST0ST0X IE-FM6D2UE0010MST0ST0X IE-XM-RJ45/RJ45 M.14 M.14 M.14 M.14 M.14 M.
Addresses worldwide X X.14 Addresses worldwide Let’s connect. You can find all Weidmüller addresses and your local contact on the internet at: www.weidmueller.com/countries Let’s connect.
Addresses worldwide Sales company Representation abroad Distributors X 2596860000 X.
Index We cannot guarantee that there are no mistakes in the publications or software provided by us to the customer for the purpose of making orders. We try our best to quickly correct errors in our printed media. X X.16 All orders are based on our general terms of delivery, which can be reviewed on the websites of our group companies where you place your order. On demand we can also send the general terms of delivery to you.
Weidmüller – Your partner in Industrial Connectivity As experienced experts we support our customers and partners around the world with products, solutions and services in the industrial environment of power, signal and data. We are at home in their industries and markets and know the technological challenges of tomorrow. We are therefore continuously developing innovative, sustainable and useful solutions for their individual needs. Together we set standards in Industrial Connectivity.
