User Documentation

6
5. Software-based Device Configuration
The Modbus TCP/RTU Gateway can be configured via one of the 2
Ethernet ports by
Integrated Webinterface
Telnet Console or
by PC-based utility “Modbus Gateway Administrator”
Accessing the Web interface:
The Web interface can be accessed via IP address 192.168.1.110 and
subnet mask 255.255.255.0 (Factory default value).
Connect the PC to one of the both Ethernet ports and set the PC’s IP
address to a free one of network range 192.168.1.0 / 255.255.255.0
Start a Web browser and enter the IP address of the connected
Gateway into the browser’s address line.
http://192.168.1.110
After the appearance of the login prompt, please enter following login
data (factory settings):
User name: admin
Password: Detmold
Configuration via PC-based tool “Modbus Gateway Administrator”:
1. Download the software from Weidmüller Internet page (Download
link see page 1).
2. Install the software according to attached installation guide
(contained in the ZIP-file).
3. Start the “Modbus Gateway Administrator” to configure the Modbus
TCP/RTU Gateway.
Note: For more detailed information about configuration and using the
Modbus TCP/RTU Gateway please read the downloadable manual from
Weidmüller Internet page (Download link see page 1).
6. Specifications
Power Requirements
Power Input
12 to 48 VDC
Power Consumption
Max. 435 mA @ 12 VDC,
Max. 130 mA @ 48 VDC
Physical Characteristics
Housing
Plastic, IP30
Dimensions
29 (W) x 124.5 (H) x 89.2(D) mm
Installation
DIN-Rail Mounting