Brochure/Catalogue
11
Cabling solution for AIDA/PROFINET
Signal transmission
In collaboration with members of AIDA, Weidmüller has
developed the all-purpose signal connector in the proven
PROFINET PushPull housing. The way has now been cleared
for inclusion in the PROFINET specication as well as in
the international IEC standard.
The insert has 10 contacts, each of which can transmit
up to 3 A of current. The conguration can be selected
freely for specic applications. When used within the AIDA
application, however, there is a xed allocation.
The contacts are supplied on a roll of 300 pieces.
For connecting the wires you require our HTF HYB
crimping tool.
PushPull signal connector, 10-pole for analogue signals,
low-level voltages or eldbus, crimp contacts with
wire cross-sections from 0.08 to 0.75 mm²
FreeCon: hybrid distributor,
special design for aluminium welding
Crimping tool for hybrid contacts
ensures perfect crimping results
FreeCon: junction box/coupling and cable coupler for PushPull hybrid connector
optional mounting options: at the front on a mounting plate or with a mounting
foot. Installation of the cable coupler: ying or with additional support frame