Brochure/Catalogue
Unmanaged Switches Fast Ethernet - Power over Ethernet – Basic Line
6-Port unmanaged Fast Ethernet PoE+ Switches
• 4x IEEE 802.3af/at konforme PoE-Ports
• Up to 30 watts per PoE port
• 12/24/48 V DC redundant wide-range power supply
• Integrated DC/DC converter can supply 48 V-PoE devices across the entire
input voltage range of 12- 57 V DC
• Intelligent power consumption detection and classication
• Broadcast Storm Protection
Environmental Limits
Operating Temperature Standard models: -10 to 60°C (14 to 140°F),
models with extended temperature range:
-40 to 75 °C (-40 to 167 °F)
Storage Temperature -40 to 85 °C (-40 to 185 °F)
Ambient Relative Humidity 5 to 95 % (non-condensing)
Regulatory Approvals
Safety UL 508
EMC EN 55032/24
CISPR 32, FCC Part 15B Class A
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
MTBF (mean time between failures)
Time IE-SW-BL06(T)-2TX-4PoE:1,398,743 hrs
IE-SW-BL06(T)-4PoE-2SC/ST: 1,289,258 hrs
IE-SW-BL06(T)-1TX-4PoE-1SC/ST: 1,289,258 hrs
Datenbase Telcordia (Bellcore), GB
Warranty
Warranty Period 5 years
Ordering data
Version Type Operating
Temperature
Order No.
2 * RJ45 10/100 BaseT(X),
4 * RJ45 10/100 BaseT(X) PoE+
IE-SW-BL06-2TX-4PoE -10 to +60 °C 1241380000
IE-SW-BL06T-2TX-4PoE -40 to +75 °C 1286920000
1 * RJ45 10/100 BaseT(X),
4 * RJ45 10/100 BaseT(X) PoE+,
1 * SC-Multimode
IE-SW-BL06-1TX-4PoE-1SC -10 to +60 °C 1504250000
IE-SW-BL06T-1TX-4PoE-1SC -40 to +75 °C 1504260000
1 * RJ45 10/100 BaseT(X),
4 * RJ45 10/100 BaseT(X) PoE+,
1 * ST-Multimode
IE-SW-BL06-1TX-4PoE-1ST -10 to +60 °C 1504270000
IE-SW-BL06T-1TX-4PoE-1ST -40 to +75 °C 1504290000
4 * RJ45 10/100 BaseT(X) PoE+,
2 * SC-Multimode
IE-SW-BL06-4PoE-2SC -10 to +60 °C 1504210000
IE-SW-BL06T-4PoE-2SC -40 to +75 °C 1504220000
4 * RJ45 10/100 BaseT(X) PoE+,
2 * ST-Multimode
IE-SW-BL06-4PoE-2ST -10 to +60 °C 1504230000
IE-SW-BL06T-4PoE-2ST -40 to +75 °C 1504240000
Accessories
Type Order No.
19“ Rack Mounting Kit RM-KIT 1241440000
Wall mounting kit IE-WALLMOUNT-KIT-46MM 1504440000
\ %
Technical data
Technology
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.3af for PoE
IEEE 802.3at for PoE+
Processing Type Store and Forward
Flow Control IEEE 802.3x ow control, back pressure ow control
Switch Properties
MAC table size 2 K
Packet buffer size 768 KB
Interface
Fibre-optic ports 100BaseFX (SC/ST-duplex connection)
RJ45 Ports 10/100BaseT(X) auto negotiation speed,
Full/Half duplex mode and auto MDI/MDI-X connection
DIP Switches Enable/disable broadcast storm protection
Specication optical ber
Transceiver Type
100Base FX
Multi-Mode
Fiber Cable Type OM1
50/125 μm
800 MHz*km
Typical Distance 4 km 5 km
Wave-
length
Typical (nm) 1300
TX Range (nm) 1260 to 1360
RX Range (nm) 1100 to 1600
Optical
Power
TX Range (dBm) -10 to -20
RX Range (dBm) -3 to -32
Link-Budget (dB) 12
Dispersion Penalty (dB)
3
Power Requirements
Input Voltage 12/24/48 V DC (12 to 57 V DC), two redundant inputs
Input Current 6.19 A at 12 VDC
5.55 A at 24 VDC
2.71 A at 48 VDC
Inrush current 64.56 A at 48 VDC (0.1 – 1 ms)
Power loss 36.4 BTU/h
Connection 1 removable 4-pole terminal block
Reverse polarity protection Present
Overcurrent current protection Present
PoE
PoE power budget total 62 W at 12 V DC (12-17 V DC)
120 W at 24/48 V DC (18-57 V DC)
PoE output voltage 50 V DC at 12/24/48 V DC input voltage
PoE output power 15.4 W at 802.3af, 30 W at 802.3at
PoE output current 350 mA at 802.3af, 600 mA at 802.3at
PoE pinout Mode A: wire pair 1, 2 (V+); wire pair 3,6 (V-)
Physical Characteristics
Housing Aluminium, IP30 protection
Dimensions (W x H x D) 50 x 114 x 70 mm (1.96 x 4.53 x 2.76 in)
Weight 375 g
Installation DIN-Rail, wall (with optional mounting kit)
3R(
0
(WKHUQHW6ZLWFK
3:5
3:5
B
Industrial Ethernet Switches
B.20 2596860000