Product Change Notification
Change Log firmware Security Router IE-SR-2/6GT-series
Copyright © 2021 Weidmüller Interface GmbH & Co. KG Page 1 / 9
All rights reserved. Reproduction without permission is prohibited.
Firmware Change Log (new features and bug fixes) for
Industrial Security Router Series IE-SR-2/6GT
List of affected Router models:
Article name
Article number
IE-SR-2GT-LAN
1345270000
IE-SR-2GT-LAN-FN
1489940000
IE-SR-2GT-UMTS/3G
1345250000
IE-SR-2GT-LTE/4G-US
2535780000
IE-SR-2GT-LTE/4G-EU
2535930000
IE-SR-6GT-LAN
2535940000
IE-SR-6GT-LTE/4G-US
2535950000
IE-SR-6GT-LTE/4G-EU
2535960000
IE-SR-2GT-LAN-M
2535980000
IE-SR-2GT-LTE/4G-EU-M
2535970000
Important note when using the Weidmüller u-link Remote Access Service:
1. The u-link Remote Access Service is supported by firmware since version 3.0.2 Build number 72728 or later. If
a Router shall be used for u-link additionally to an existing configuration, please upgrade the firmware to the
latest available version without a factory reset (by disabling the checkbox “Set factory defaults of the new
firmware”).
2. If you will use any 6-Port Router model with u-link you need at least to update to version 3.2.1 Build 79368 or
later.
3. The u-link Remote Access Service can be used with each Weidmüller router model except the variant
IE-SR-GT-LAN-FN which does not support any VPN functions.
General Upgrade/Downgrade information:
Upgrade to version 4.x is only possible from version 3.5.0 or higher. For Routers with versions < 3.5.0 first update
to version 3.5.x followed by a final update to latest version.
Version 4.0.4, Build number 114187
Release date: January 04, 2020
Feature updates:
• The Syslog can now be stored on an inserted USB stick which has to be preformatted with a Linux ext4
filesystem. This feature can be enabled on the Event Log → Configuration page. The syslog files are
used as ring buffer. The file size depends on the size of the stick.
• IPsec IKEv2 can now be activated. By default, active connections are now initiated using IKEv2 but
IKEv1 connections are passively accepted.
• The Forwarding feature has been extended to forward UDP or TCP port ranges.
• Subnet mask value /0 is now allowed for u-link’s destination SNAT configuration parameter.
Bug Fixes:
• USB Sticks with FAT file system got formatted with the Linux ext4 file system when inserted. Bug was
introduced with version 4.0.1.
• USB sticks with configuration or firmware files have been processed correctly but the device was caught
in a reboot loop until the stick was removed. This regression bug was introduced in version 4.0.1 and
has been fixed now.
• Fixed a regression bug introduced with 4.0.1. NATing and filtering of active FTP was broken.
• 3G models did not get a DNS-Server from the mobile radio provider. This bug was introduced with
version 4.0.1.