Approval/Certificate/Document of Conformity

Job Id: 262.1-011192-10
Certificate No: TAA0000112
Revision No: 2
Form code: TA 251
Revision: 2016-12
www.dnvgl.com
Page 3 of 4
Fast Ethernet SFP-Transceiver
 IE-SFP-1FEMLC-T
 IE-SFP-1FESLC-T
 IE-SFP-1FELLC-T
Industrial Media Converter (Ethernet to Fiber)
 IE-MC-VL-1TX-1SC
 IE-MC-VLT-1TX-1SC
 IE-MC-VL-1TX-1ST
 IE-MC-VLT-1TX-1ST
 IE-MC-VL-1TX-1SCS
 IE-MC-VLT-1TX-1SCS
Compass safe distance
Steering: 600 mm
Standard: 600 mm
Application/Limitation
The Type Approval covers hardware listed under Product description. When the hardware is used in
applications to be classed by DNV GL, documentation for the actual application is to be submitted for
approval by the manufacturer of the application system in each case. Reference is made to DNV GL
Rules for Ships Pt.4 Ch.9 Control and Monitoring Systems.
Product certificate
If specified in the Rules, ref. Pt.4 Ch.9 Sec.1, the control and monitoring system in which the above
listed hardware is used shall be delivered with a product certificate. For each such delivery the
certification test is to be performed at the manufacturer of the application system before the system is
shipped to the yard. The test shall be done according to an approved test program. After the certification
the clause for application software control will be put into force.
Clause for application software control
All changes in software are to be recorded as long as the system is in use on board. The records of all
changes are to be forwarded to DNV for evaluation and approval. Major changes in the software are to
be approved before being installed in the computer.
Tests carried out
Applicable tests according to class guideline DNVGL-CG-0339, November 2016.
For the bridge mounted components the ‘Acoustic noise and signals’ and the ‘Compass safe distance’
were measured according to sections 11.1 and 11.2 of IEC 60945, 4th edition (2002).
Marking of product
The products to be marked with:
 Model name
 Applicant name
 Serial number
Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the type are
complied with, and that no alterations are made to the product design or choice of systems, software
versions, components and/or materials.
The main elements of the assessment are:
 Ensure that type approved documentation is available
 Inspection of factory samples, selected at random from the production line (where practicable)
 Review of production and inspection routines, including test records from product sample tests and
control routines