User Documentation
User Manual Managed Switches
145
6. Click Save and Compile
in the Hardware
configuration.
4.2.8 Configuring device properties
1. Select the switch and double-click the first sub-module slot 0 to set device properties.
2. Select Parameters and change the
device parameter settings.
3. Click Save and Compile
Configuring I/O cycle time
1. Select the switch and double-click the
sub-module X1 to set the I/O cycle.
2. Select IO Cycle and change the I/O cycle
settings.
3. Click Save and Compile.
Configuring port property