User Documentation

User Manual Managed Switches
169
5
Get
Port Type Name
SHORT_
STR ING
String which names the port
type. The maximum number
of characters in the string is
64.
6
Get/Set
Port Description
SHORT_
STR ING
String which describes the
port. The maximum number of
characters in the string is 64.
7
Get
Node Address
Padded
EPATH
Node number of this device on
port. The range within this
data type is restricted to a Port
Segment.
9
Get
Port Key
Padded
EPATH
Electronic key of
network/chassis this port is
attached to. This attribute
shall be limited to format 4 of
the Logical Electronic Key
segment.
Common Service List
Service
Code
Implementation
Service Name
Description
Class
Instance
0x0E
Get_Attribute_Single
Used to read an object instance
attribute
0x10
Set_Attribute_Single
Used to modify an object instance
attribute
Weidmüller Networking Object
The Weidmüller Networking object includes system information and status.
It can also be used to do the device diagnostic & configuration through explicit messaging. The class
code is 0x404.
Class Attribute List
Attr ID
Access Rule
Name
Data Type
Description
1
Get
Revision
UINT (16)
Revision of this object
Instance Attribute List
Attr ID
Access Rule
Name
Data Type
Description
1
Get
Firmware
Version
UDINT (32)
Switch firmware version
2
Get
System Fault
Status
UDINT (32)
Switch fault status
Bit 0: Reserved (0 = Ok, 1 = Fail)
Bit 1: Reserved (0 = Ok, 1 = Fail)
Bit 2: Port utilization alarm (0 = No
alarm , 1 = alarm)
Bit 3: Port link up (0 = No alarm, 1 =