User Documentation

User Manual Managed Switches
181
3. Click the Upgrade Firmware toolbar icon , or select Upgrade under the Firmware menu. The
Switch has to be unlocked to be able to use this function. Use the Open window to navigate to the
folder that contains the firmware upgrade file, and then click the correct "*.rom" file
(FWR_IE-SW-VL08M_V3.3.16_Build_14032117.rom in the example shown below) to select the file.
Click Open to activate the upgrade process.
A1.6 Modify IP Address
You may use the Modify IP Address function to reconfigure the Weidmüller switch network settings.
Start by clicking the Modify IP address icon , or by selecting Modify IP address under the
Configuration menu. The Switch has to be unlocked to be able to use this function.
The Setup Configuration window will open. Checkmark the box to the left of those items that you
wish to modify, and then Disable or Enable DHCP, and enter IP Address, Subnet mask, Gateway,
and DNS IP. Click OK to accept the changes to the configuration.