User Documentation

User Manual Managed Switches
68
Explanation of ‘Setting’ items for selected redundancy protocol Turbo Ring V2
Enable Ring 1
Setting
Description
Factory Default
Enabled
Enable the Ring 1 settings
checked
Disabled
Disable the Ring 1 settings
Not checked
Enable Ring 2
Setting
Description
Factory Default
Enabled
Enable the Ring 2 settings
Not checked
Disabled
Disable the Ring 2 settings
Set as Master
Setting
Description
Factory Default
Enabled
Select this Switch as Master
Not checked
Disabled
Do not select this Switch as Master
Redundant Ports
Setting
Description
Factory Default
1st Port
Select any port of the Switch to be one of the redundant
ports.
See the following
table
2nd Port
Select any port of the Switch to be one of the redundant
ports.
See the following
table
Below table lists the default redundancy ports for Ring 1 dependent on the used models.
Model
Default 1st Port
Default 2nd Port
IE-SW-VL05M/08M Series
IE-SW-PL06M/08M/09M/16M
Series
The second port from the last port
number
The last port of the switch
(highest port number)
IE-SW-PL18M Series
Port G1
Port G2
IE-SW-PL10M Series
Port G2
Port G3
Below table lists the default redundancy ports for Ring 2 dependent on the used models
Model
Default 1st Port
Default 2nd Port
IE-SW-VL05M/08M Series
IE-SW-PL06M/08M/16M
Series
The fourth port from the last port
number
The third port from the last port
number of the switch
IE-SW-PL09M Series
Port G7
Port G6
IE-SW-PL18M Series
Port 15
Port 16
IE-SW-PL10M Series
Port G1
Port 7
Enable Ring Coupling
Setting
Description
Factory Default
Enable
Select this Switch as Coupler
Not checked
Disable
Do not select this Switch as Coupler
Coupling Mode
Setting
Description
Factory Default
Dual Homing
Select this item to change to the Dual Homing
configuration page
See the following
table
Ring Coupling
Select this item to change to the Ring Coupling (backup)
See the following