User Documentation

User Manual Managed Switches
93
Access
This port type is used to connect single devices without
tags.
Access
Trunk
Select "Trunk" port type to connect another 802.1Q VLAN
aware switch.
Hybrid
Select Hybrid port to connect another Access 802.1Q
VLAN aware switch or another LAN that combines tagged
and/or untagged devices and/or other switches/hubs.
ATTENTION
For communication redundancy in the VLAN environment, set Redundant Port,
Coupling Port, and Coupling Control Port as "Trunk Port," since these ports act as
the "backbone" to transmit all packets of different VLANs to different Weidmüller
switches.
Port PVID
Setting
Description
Factory
Default
VID ranges from 1
to 4094
Sets the default VLAN ID for untagged devices that
connect to the port.
1
Fixed VLAN (Tagged)
Setting
Description
Factory
Default
VID ranges from 1
to 4094
This field will be active only when selecting the Trunk or
Hybrid port type. Set the VLAN ID for tagged devices that
connect to the port. Use commas to separate different
VIDs.
None
Fixed VLAN List (Untagged)
Setting
Description
Factory
Default
VID range from 1
to 4094
This field will be active only when selecting the Hybrid
port type. Set the VLAN ID for tagged devices that
connect to the port and tags that need to be removed in
egress packets. Use commas to separate different VIDs.
None
Forbidden VLAN List
Setting
Description
Factory
Default
VID ranges from 1
to 4094
This field will be active only when selecting the Trunk
or Hybrid port type. Set the VLAN IDs that will not be
None