Approval/Certificate/Document of Conformity
[13]
Schedule
[14] TYPE EXAMINATION CERTIFICATE No.
DEMKO 11 ATEX 150191X Rev. 4
00-IC-F0060-1 – Issue 14.0
This certificate may only be reproduced in its entirety and without any change, schedule included. Page 2 of 3
[15] Description of Product:
The models are DIN rail mounted industrial application ethernet communication devices. They are intended for Industrial Applications,
pollution degree 2 environments. They are microcomputer-based and communicate via interfaces through wire. Subject models are of the
open type and are intended for installation into a suitable enclosure.
Series IE-SW-VL16 and Series IE-SW-VL16T, may be followed by -16TX or -14TX, may be followed by -2SC or -2ST.
Series IE-SW-PL16M and Series IE-SW-PL16MT
, may be followed by -16TX or -14TX, may be followed by –2SC or –2ST.
Series IE-SW-PL18M-2GC and Series IE-SW-PL18MT, may be followed by -16TX or -14TX, may be followed by –2SC or –2ST.
Model Differences
Model
No. of Ethernet RJ45
Ports
No. of Fiber Port (M.M.) No. of Fiber Port (S.M.)
IE-SW-VL16-16TX
16
-
-
IE-SW-VL16T-16TX
16
-
-
IE-SW-VL16-14TX-2SC
14
2
-
IE-SW-VL16T-14TX-2SC
14
2
-
IE-SW-VL16-14TX-2ST
14
2
-
IE-SW-VL16T-14TX-2ST
14
2
-
Model
No. of Ethernet RJ45
Ports
No. of Fiber Port (M.M.) No. of Fiber Port (S.M.)
IE-SW-PL16M-16TX
16
-
-
IE-SW-PL16MT-16TX
16
-
-
IE-SW-PL16M-14TX-2SC
14
2
-
IE-SW-PL16MT-14TX-2SC
14
2
-
IE-SW-PL16M-14TX-2ST
14
2
-
IE-SW-PL16MT-14TX-2ST
14
2
-
Model
No. of Ethernet
RJ45 Ports
No. of Fiber Port (M.M.)
No. of
Fiber
Port
(S.M.)
No. of GBIC
Module
IE-SW-PL18M-2GC-16TX
16
-
-
2
IE-SW-PL18MT-2GC-16TX
16
-
-
2
IE-SW-PL18M-2GC14TX2SC
14
2
-
2
IE-SW-PL18MT-2GC14TX2SC
14
2
-
2
IE-SW-PL18M-2GC14TX2ST
14
2
-
2
IE-SW-PL18MT-2GC14TX2ST
14
2
-
2
IE-SW-PL18M-2GC14TX2SCS
14
-
2
2
IE-SW-PL18MT-2GC14TX2SCS
14
-
2
2
Note: S.M. – Single-mode Fiber
M.M. – Multi-mode Fiber
The optical radiation output of the product with respect to explosion protection, according to Annex II clause 1.3.1 of the Directive
2014/34/EU is not covered in this certificate.
Temperature range:
The relation between ambient temperature and the assigned temperature class is as follows:
Ambient temperature range
Temperature class
-40°C to +75°C
T4
For Models IE-SW-VL16(X)-16TX,
IE-SW-VL16(X)-14TX-2SC,
IE-SW-VL16(X)-14TX-2ST,
Where (X) can be T or a blank.
-40°C to +75°C for suffix with T
0 °C to +60 °C for suffix without T
T4