Brochure/Catalogue

Klippon
®
Cable Glands
In the example case the following diameters are given:
Cable Outer Sheath: 10 mm (By looking into the below shown dimensions chart of the KDSU the orange marked clamping ranges
(Cable Outer Sheath [D]) can be selected).
Cable Inner Sheath: 8 mm (By looking into the below shown dimensions chart of the KDSU the orange marked clamping ranges
(Cable Inner Sheath [C]) can be selected).
Dimensions
Gland Seal Range
Gland Size Entry
thread
Entry
thread
Length
Max
Outer
Diameter
Max
Length
Cable
Inner Sheath
[C]
Cable
Outer Sheath
[D]
Armour
Acceptance
Range
Shroud
Size
Standard
[f]=2
Reduced
[f]=1
[ggg] [B] [A]
Min Max Min Max Min Max
G16 M20 16 28.0 78.0 3.4 8.4 9.0 13.5 6.7 10.3 0.15 - 1.25 L24
G20S M20 16 28.0 78.0 7.2 11.7 11.5 16.0 9.4 12.5 0.15 - 1.25 L24
G20 M20 16 33.0 78.0 9.4 14.0 15.5 21.1 12.0 17.6 0.15 - 1.25 EL30
G25 M25 16 41.4 90.0 13.5 20.0 20.3 27.4 16.8 23.9 0.15 - 1.60 EL38
G32 M32 16 50.6 105.0 19.5 26.3 26.7 34.0 23.2 30.5 0.15 - 2.00 EL46
G40 M40 16 60.5 113.0 23.0 32.2 33.0 40.6 28.6 36.2 0.20 - 2.00 EL55
G50S M50 16 71.5 125.0 28.1 38.2 39.4 46.7 34.8 42.4 0.30 - 2.50 EL65
G50 M50 16 71.5 125.0 33.1 44.1 45.7 53.2 41.1 48.5 0.30 - 2.50 EL65
G63S M63 19 88.0 125.0 39.2 50.1 52.1 59.5 47.5 54.8 0.30 - 2.50 EL80
G63 M63 19 88.0 125.0 46.7 56.0 58.4 65.8 53.8 61.2 0.30 - 2.50 EL80
G75S M75 19 99.0 131.0 52.1 62.0 64.8 72.2 60.2 68.0 0.30 - 2.50 EL90
G75 M75 19 99.0 131.0 58.0 68.0 71.1 78.0 66.5 73.4 0.30 - 2.50 EL90
All dimensions in mm
By the selection of the inner [C] resp. outer [D] clamping range, a range should be used where the diameter of the cable outer and inner sheath are as near as possible
to the average of the Min/Max Values. In doing so, the reduced cable outer sheath with the gland size G20S and the entry thread of M20 has to be selected.
Consequently is
[f]=1
[ggg]=G20S
[a]=M20
The generated information has to be lled into the order key below:
Order key [Type] [a] [b] [c] [d] [e] [f] [ggg]
Article description KDSU M20 B S O NI 1 G20S
Resulting from the complete article description the relating order number (brown marked) can be determined.
Extract from table KDSU “Nickel-plated brass gland with silicone sealing” on page D.28
Order No. Description [Type] [a] [b] [c] [d] [e] [f] [ggg] Qty.
0930001221
KDSU M20 BS O NI 1 G16 KDSU M20 B S O NI 1 G16 20
0930001222
KDSU M20 BS O NI 2 G16 KDSU M20 B S O NI 2 G16 20
0930011223
KDSU M20 BS O NI 1 G20S KDSU M20 B S O NI 1 G20S 20
0930011224
KDSU M20 BS O NI 2 G20S KDSU M20 B S O NI 2 G20S 20
0930021221
KDSU M20 BS O NI 1 G20 KDSU M20 B S O NI 1 G20 20
…
… … … … … … … … … …
D
D.26 2712630000
Cable entries