Approval/Certificate/Document of Conformity

IECEx Certificate of Conformity
Annexe
Annexe for Certificate No.:
IECEx ITA 14.0013X
Issue No.:
02
This form is identified as QMA-HAE-08-710 Issued 2014-05-19 Page 2 of 3
Conditions of Certification pertaining to Issue 0 of this Certificate:
Conditions of Manufacture:
1. The manufacturer will ensure that the IP rating of the enclosure, all actuators and all cable
glands or breathers will be at least IP65.
2. Only approved components shown in the ExTR or suitably certified breathers and cable
glands to be used in the construction of the equipment.
Condition of Safe Use:
1. Refer to the table of temperature ratings for the minimum thermal class of the wiring
required for the equipment.
Drawing list pertaining to Issue 0 of this Certificate:
Manufacturer’s Documents
Title:
Drawing No.:
Pages
Rev. Level:
Date:
KLIPPON CS K41 …
3 58749
0C
2014-03-03
KLIPPON CS K … AP
3 60173
00
2014-06-23
KLIPPON CS STB 1 …
3 58751
0B
2014-03-03
KLIPPON CS STB … AP
3 60171
00
2014-06-23
KLIPPON CS POK 121209
3 58756
0C
2014-03-03
KLIPPON CS POK … AP
60172
00
2014-06-23
TPSD KCS IECEX
4 60157 (Sheet 00 of 01)
0D
2014-07-16
TPSD KCS IECEX
4 60157 (Sheet 01 of 01)
0D
2014-07-16
Notice to Installers
N/A
0.3
June 2014
Safety Documentation
N/A
0.1
July 2014
Variations permitted by Issue 1 of this certificate:
Updated the description to add reference to the component certificate assessment for components
certified to older standards.
Conditions pertaining to Issue 1 of this certificate:
The conditions of certification are unchanged from Issue 0 of the certificate.
Drawings Associated with the Issue 1 of this Certificate:
The drawings of certification are unchanged from Issue 0 of the certificate.