Brochure/Catalogue

Introduction
Klippon
®
TB MH Klippon
®
TB QL
Klippon
®
TB FS Klippon
®
EBi QL
Klippon
®
STB Klippon
®
K
T T
T
T T
Material Stainless steel Stainless steel
Stainless steel Stainless steel
Material Stainless steel Sheet steel Aluminium
Material Specification Stainless steel 1.4404 (316L),
enclosure 1.50 mm
Stainless steel 1.4404 (316L),
enclosure 1.50 mm
Stainless steel 1.4404 (316L),
enclosure 1.50 mm
Stainless steel 1.4301 (304),
enclosure 1.50 mm, (1.25 mm)
Material Specification Stainless steel 1.4404
(316L) 1.50 mm
Powder-coated
steel sheet 1.0330
High quality aluminium alloy (Al-Si12)
Sea water resistance very good very good
very good very good
Sea water resistance very good good good
UV resistance very good very good
very good very good
UV resistance very good insufficient very good
Halogen free / cadmium free x / x x / x
x / x x / x
Halogen free / cadmium free x / x x / x x / x
Surface finish electropolished electropolished
electropolished Brushed – grain size 240
Surface finish electropolished,
Mirror-polish
powder-coated neutral, powder-coated
Intended use Explosive hazard areas, offshore, oil
and gas industry, chemical industry,
process industry
Explosive hazard areas, offshore, oil
and gas industry, chemical industry,
process industry
Explosive hazard areas, offshore, oil
and gas industry, chemical industry,
process industry
Machine construction, transport, power
Intended use Ex areas,
packing industry,
railways, shipping,
process industry
Packing industry,
railways, shipping,
process industry
Ex-areas, process industry,
transport, railways, shipping,
port facilities, packaging,
mechanical engineering
Dimensions Dimensions
H x W x D (min.) in mm
229x152x133 229x152x133
229x152x133 300x200x150 H x W x D (min.) in mm
120x120x80 50x45x30
H x W x D (max.) in mm 980x740x200 980x740x200 980x740x200 800x600x220 H x W x D (max.) in mm
250x400x130 230x280x111
Geometry 3 standard depths 3 standard depths
3 standard depths 2 standard depths
Geometry 5 standard depths 11 standard depths
Specific characteristics Specific characteristics Ex-version Industrial version Ex-version Industrial version
Gland plates 0,1,2,3,4 0,1,2,3,4
0,1,2,3,4 0,1
Gland plates none none none none
Type of gasket Flat gasket Flat gasket Flat gasket Flat gasket and foam seal Type of gasket Flat gasket Flat gasket Shaped gasket Shaped gasket
Seal material Silicone Silicone Silicone EPDM, polyurethane (PUR) foam Seal material Silicone Silicone Silicone Chloroprene, Silicone
Enclosure attachment
4 or 6 mounting feet
with 11 mm hole size
4 or 6 mounting feet
with 11 mm hole size
4 or 6 mounting feet
with 11 mm hole size
Direct mounting
(9 mm mounting holes on rear wall) or via
mounting feet (optionally available)
Enclosure attachment External holders
with 8 mm holes
External holders
with 8 mm holes
4 holes for M4
to M6 screws
4 holes for M4
to M6 screws
Installation mounting 4 or 6 mounting bolts
with M6 threaded holes
4 or 6 mounting bolts
with M6 threaded holes
4 or 6 mounting bolts
with M6 threaded holes
Welded mounting bracket
Installation mounting 20 mm C-rail
welded to the
enclosure
20 mm C-rail
welded to the
enclosure
M4 to M6
threaded holes
M4 to M6
threaded holes
Temperature range
-60 °C…+135 °C (IP66)
-60 °C...+105 °C (IP67)
-60 °C…+135 °C
-60 °C…+135 °C (IP66)
-60 °C...+105 °C (IP67)
-40 °C…+85 °C
Temperature range
-60 °C…+100 °C -60 °C…+120 °C -60 °C…+135 °C
-40 °C…+80 °C (CR);
-60 °C…+135 °C (VMQ)
Impact resistance
IK 09 (10J) in accordance with DIN EN 50102 /
7J in accordance with IEC 60079-0
IK 09 (10J) in accordance with DIN EN 50102 /
7J in accordance with IEC 60079-0
IK 09 (10J) in accordance with DIN EN 50102 /
7J in accordance with IEC 60079-0
IK 09 (10J) in accordance with
IEC 62208
Impact resistance
7J in accordance
with IEC60079-0
IK 09 (10J) in accordance
with DIN EN 50102
7J in accordance
with IEC60079-0
IK 09 (10J) in accordance
with DIN EN 50102
IP – protection class IP66, IP67 / IP66 / IP66, IP67 / IP66 / IP – protection class IP66 / IP66 IP66, IP67 / IP66, IP67, IP68 /
NEMA protection class Nema 3, Nema 4x, Nema 12 Nema 3, Nema 4x, Nema 12
Nema 3, Nema 4x, Nema 12 Nema 3, Nema 4x, Nema 5
NEMA protection class
Nema 4, 4x
Nema 4x Nema 4x
Flammability rating Flammability rating
Surface resistance (in ohms) Surface resistance (in ohms)
Approvals Approvals
ATEX x x x ATEX x x
AEx x x x AEx x
CCOE / INMETRO In preparation / x In preparation / x In preparation / x CCOE / INMETRO – / x
cULus x x x x cULus x x
EAC x x x EAC x x x
IECEx x x x IECEx x x
NEPSI / KOSHA x / x x / x x / x NEPSI / KOSHA - / x
RMR / LR / DNV GL x / – / x x / – / x x / – / x – / – / x RMR / LR / DNV GL x / x / x x / x / – x / – / x x / – / x
Configuration Configuration
Lid hinges
Removable lid
Gland plates
Welded mounting feet
Fitting for a padlock
Lid hinges
Gland plates
Welded mounting feet
Quarter lock
Removable lid
Gland plates
Welded mounting feet
Lid hinges
Gland plates
Direct mounting, Optional mounting feet
Quarter lock
TAS 20 C-profile rail
Welded mounting feet
Earth studs in enclosure lid
and base
Internal earthing
screw in the
enclosure base
an external earth
stud
internal earthing
screw in the
enclosure base
C
C.32712630000
Enclosures