Document of Conformity

ManualsBrandsWeidmueller ManualsConnectivityKLIPPON POK 121209

This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,

which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

Certificate No. 14/20001 (E1)

Issue Date 28 March 2019

Expiry Date 16 January 2024

Sheet 1 of 3 Thorsten Wolff

Hamburg Technical Support Office

Lloyd’s Register EMEA

71 Fenchurch Street, London EC3M 4BS

Lloyd's Register EMEA

Is a subsidiary of Lloyd's Register Group

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to

in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense

caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant

Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and

conditions set out in that contract.

Type Approval Certificate

This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the

relevant requirements of the Lloyd’s Register Type Approval System.

This certificate is issued to:

PRODUCER

Weidmüller Interface GmbH & Co. KG

Klingenbergstr. 16

32758 Detmold

GERMANY

DESCRIPTION Empty enclosures

TYPES Klippon POK 080806, 081106, 081606, 081906, 082306, 121209, 122209,

161609, 162609, 163609, 165609, 252512, 254012, 256012,

404012, 252516, 254016,

080806 Ex, 081106 Ex, 081606 Ex, 081906 Ex, 082306 Ex,

121209 Ex, 122209 Ex, 161609 Ex, 162609 Ex, 163609 Ex,

165609 Ex, 252512 Ex, 254012 Ex, 256012 Ex, 404012 Ex,

252516 Ex, 254016 Ex

APPLICATION Empty enclosure for low voltage application in the marine environment.

STANDARD DIN EN 62208: 06.2012

DIN EN 60529: 09.2014

LR031.1.2016.06

Lloyd's Register Deutschland GmbH

Thorsten Wolff

Hamburg Technical Support Office Office

Thorst

Wol

Hamburg

Techni

cal

Sup

Summary of content (3 pages)

PAGE 1
Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Lloyd’s Register Type Approval System. This certificate is issued to: PRODUCER Weidmüller Interface GmbH & Co. KG Klingenbergstr.
PAGE 2
RATINGS Type POK 080806 (Ex) POK 081106 (Ex) POK 081606 (Ex) POK 081906 (Ex) POK 082306 (Ex) POK 121209 (Ex) POK 122209 (Ex) POK 161609 (Ex) POK 162609 (Ex) POK 163609 (Ex) POK 165609 (Ex) POK 252512 (Ex) POK 254012 (Ex) POK 256012 (Ex) POK 404012 (Ex) POK 252516 (Ex) POK 254016 (Ex) Size (L x W x H) 75 mm x 80 mm x 55mm 75 mm x 110 mm x 56 mm 75 mm x 160 mm x 56 mm 75 mm x 190 mm x 55 mm 75 mm x 230 mm x 56 mm 120 mm x 122 mm x 90 mm 120 mm x 220 mm x 90 mm 160 mm x 160 mm x 90 mm 160 mm x 260 mm x 90 mm
PAGE 3
The Type Approval does not eliminate the need for normal inspection and survey procedures required by the Rules and Regulations. If the specified standards are amended during the validity of this certificate, the product is to be re-approved prior to it being supplied to vessels to which the amended standards apply. The Design Appraisal Document No. HTS/ETS 38015-19 and its supplementary Type Approval Terms and Conditions form part of this Certificate. Certificate No.