Document of Conformity

IECEx Certificate

of Conformity

Certificate No: IECEx IBE 09.0018U Issue No: 1

Date of Issue: 2017-06-09

Manufacturer: Weidmüller Interface GmbH & Co. KG

Klingenbergstrasse 16

32758 Detmold

Germany

Additional Manufacturing location(s):

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the

IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and

found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme

Rules, IECEx 02 and Operational Documents as amended.

STANDARDS:

The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found

to comply with the following standards:

IEC 60079-0 : 2011

Edition:6.0

Explosive atmospheres - Part 0: General requirements

IEC 60079-11 : 2011

Edition:6.0

Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-31 : 2013

Edition:2

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

IEC 60079-7 : 2015

Edition:5.0

Explosive atmospheres – Part 7: Equipment protection by increased safety ''e''

This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the

Standards listed above.

TEST & ASSESSMENT REPORTS:

A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in