User Documentation

2669500000/00/03.20194
Instruction manual cable cutter
Mortal danger!
Do not live working!
Switch off current!
Risk of injury!
No extremities near the blades!
For exibel copper and aluminium
cables or ne stranded up to Ø 36
mm.
Not suitable for cutting steel-ar-
moured cables, aluminium alloys
and hard drawn copper conduc-
tors!
The tool must only be used by inst-
ructed professionals.
General safety instructions
– Please read the instruction manual before
using the tool and use the tool only for the
specied application.
– Please observe the instructions during the
use and keep the safety instructions next to
the tool.
– Weidmüller assumes no liability for damages
or injuries caused by unsafe use of the tool,
defective maintenance or faulty application.
– The tool must only be repaired from the
manufacturer. If not, claims of the warranty
declaration expires.
Use
► Insert the cable and turn the blade (1) until
the edge of the blade rests on the cable.
► Do not cut angularly!
► Squeeze the handles (2) to manually operate
the blade (1) during the cutting process.
Risk of injury!
Danger of crushing during opening
cutting mechanism.
► Releasing the blade (1) is possible during
cutting proceeding as follows:
Squeeze handles (2) (both halves) together
until the retaining pawl (3) can easily be
disengaged. Keeping the retaining pawl (3)
down, release handle (2) and blade (1) turns
back into rst position.
Maintenance
► Oil movable parts.
► Brush ratchet teeth.