Brochure/Catalogue

832452970000
Klippon
®
TB FS 553520 Depth 200 mm
Height/Width/Depth 550 / 350 / 200 mm
View without cover,
seal and screw
M10 internal/external
ground connection
M6 internal ground
connection
B
C
D
376/406*
355
A
200
15
126.5
304
340
131 167
167
131
494 458
350
550
479 520
298
273
350 555
15
Ordering data
Stainless steel 1.4404 316L, electropolished Order No.
1 gland plate - bottom side (B) 1196360000
2 gland plates - top and bottom sides (A & B) 1196370000
3 gland plates - bottom, left and right sides (B, C & D) 1196380000
4 gland plates - top, bottom, left and right sides (A, B, C & D) 1196390000
Note
Painted sheet steel enclosure available on request. The colours of painted enclosures may vary
under certain circumstances.
Max. number of terminals (industry)
Max. number of terminals (industry) vertical horizontal
2.5 mm² 2x91 4x52
4 mm² 2x76 4x43
6 mm² 2x58 4x32
10 mm² 2x46 3x26
16 mm² 1x39 3x22
35 mm² 1x29 2x16
Note
*For the enclosure versions with no, one or two gland plates, the horizontal distance between the
mounting feet is reduced by 30mm.
The assembly with modular terminals gives consideration to a distance of 10mm from the end
of each mounting rail.
Order recommendations:
TS35 mounting rail (screw terminal) WDU2.5 1020000000 / (tension clamp terminal)
ZDU2.5 1608510000 / (tension clamp terminal) PDU2.5 1896110000
TS32 mounting rail (screw terminal) SAK 2.5 0279660000
TS15 mounting rail (screw terminal) AKZ 2.5 0697160000
Accessories
Mounting plates and fastening screws
Steel sheet, zinc plated
Stainless steel 1.4301
With hole pattern, natural stainless steel 1.4301
Fastening screws for mounting plates
Fastening screws for terminal rails
Stainless steel spacer M6 x 8, Set of 4
10 mm length
15 mm length
20 mm length
30 mm length
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404
Left and right sides (C & D), electropolished stainless steel 1.4404
Mounting screw, stainless steel 1.4404
Label holder
70 x 70 angled stainless steel 1.4301
130x50 stainless steel 1.4301
100x25 stainless steel 1.4301
Document holder
For DIN A6 size documents
For DIN A5 size documents
For DIN A4 size documents
Set of fixings
For label holders, rain hoods and document holders (rivet)
For plastic (Trafolyte), identification plate (screw)
Earthing stud
Stainless steel 1.4404
Order No.
1194010000
1193880000
1257720000
0642600000
1274150000
0935110000
0935120000
0935130000
0935140000
1256590000
1256610000
1253230000
1279320000
1283450000
1257640000
1252780000
1252750000
1252730000
1252190000
1285200000
1192690000
Note
Number of cable entries
Number of cable entries A / B C / D
M12 45 70
M16 30 48
M20 20 30
M25 17 26
M32 9 14
M40 7 12
M50 3 5
M63 3 4
M75 2 3
Note
Our IP68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
289.00
273.00
Ø 7
479.00
495.00
Klippon
®
TB FS - Fixing Screw