Approval/Certificate/Document of Conformity

IBExU Institut fUr Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
[1] EU-TYPE EXAMINATION CERTIFICATE - Translation
[2] Components intended for use on
1
in an equipment or protective systems
intended for use in potentially explosive atmospheres, Directive
2014/34/EU
(3) EU-type examination certificate number IBExU14ATEX1028 U [Issue 1
[4]
Product: Empty enclosure
Type Klippon TB FS ... (KTB FS), TB MH ... (KTB MH), TB OL. .. (KTB OL)
[5] Manufacturer: Weidmuller Interface GmbH & Co. KG
[6] Address: Klingenbergstral1e 16
32758 Detmold
GERMANY
[7] This product and any acceptable variation thereto is specified in the schedule to this certificate and the
documents therein referred to.
[8] IBExU Institut fOr Sicherheitstechnik GmbH, notified body number 0637 in accordance with Article 17
of Directive
2014/34/EU
of the European Parliament and of the Council,
dated
26 February 2014,
certifies that this product has been found to comply with the essential health and safety requirements
relating to the design and construction of products intended for use in potentially explosive
atmospheres given in Annex lito the Directive.
The examination and test results are recorded in the confidential test report IB-16-3-145.
[9] Compliance with the essential health and safety requirements has been assured by compliance with:
EN 60079-0:2012+A11:2013 EN 60079-7:2015 EN 60079-31:2014
except in respect of those requirements listed at item [18] of the schedule.
[10] If the sign "U" is placed after the certificate number, it indicates that this certificate must not be
mistaken for a certificate intended for an equipment or protective system. This partial certification may
be used as a basis for certification of an equipment or protective system.
[11] This EU-type examination certificate relates only to the design and construction of the specified
product. Further requirements of the Directive apply to the manufacturing process and supply of this
product. These are not covered by this certificate.
[12] The marking of the product shall include the following:
e
II 2G Ex eb IIC Gb
e
II 2D Ex tb IIIC Db
IBExU Institut fOr Sicherheitstechnik GmbH
Fuchsmuhlenweg 7
09599 Freiberg, GERMANY
By order
Dipl.-Ing. (FH)
A
Henker
Tel: + 49 (0) 37
31/38
05 0
Fax: + 49 (0) 37
31/38
0510
Certificates without signature and seal
are not valid Certificates may only be
duplicated completely and unchanged
In case of dispute, the German text
shall prevail
Freiberg, 2016-12-20
FB10610110
Page
1/3
IBExU14ATEX1028 u 11

Summary of content (3 pages)