Tender specification

I
20.02.2018, page 3/4 I
Specification Text - Enclosure, Stainless steel
Sizes: 229 mm x 152 mm x 133 mm … 980 mm x 740 mm x 200 mm (Hight x Width x Depth)
Klippon TB QL 352615 S4E2 1200130000 350 mm x 260 mm x 150 mm
Options:
Label fixing sets: Stainless steel V4A / 316L / 1.4404, screwed or fixed by rivets. Punched
silicon gasket with compression control for the label and its silicon gasket,
to ensure the IP rating.
Label holder: Stainless steel V4A / 316L / 1.4404, fixed by rivets or welded.
Gland plates: Material thickness 6 mm, Stainless steel V4A / 316L / 1.4404,
Electropolished. Fixing screws (SW10) with tightly welded threaded
bushings inside the enclosure base.
Assembly of terminals: All terminal blocks of type Klippon® Connect. All DIN rails vertical
mounting, horizontal mounting as option. Terminal marker horizontal or
vertically. Hazardous areas: All terminals for intrinsically safe circuits are
colored blue, for all other circuits are colored dark beige. On request:
Assembly with control stations (switches, push buttons, lights, displays) or
with transmitters and other electronic devices.
Certifications:
For assembled resp. empty enclosures
ATEX:
II 2G Ex eb IIC, IIB, IIA T6 … T4 Gb
II 1G Ex ia IIC, IIB, IIA T6 … T4 Ga
II 2G Ex ib IIC, IIB, IIA T6 ... T4 Gb
II 3G Ex ic IIC, IIB, IIA T6 … T4 Gc
II 2G Ex e ia IIC, IIB, IIA T6 ... T4 Gb
II 2D Ex tb IIIC T85°C … T135°C Db
II 1D Ex ia IIIC T85°C ... T135°C Da
IECEx:
Ex eb IIC, IIB, IIA T6 … T4 Gb
Ex ia IIC, IIB, IIA T6 … T4 Ga
Ex ib IIC,IIB,IIA T6 ... T4 Gb
Ex ic IIC, IIB, IIA T6 … T4 Gc
Ex e ia IIC, IIB, IIA T6...T4 Gb
Ex tb IIIC T85°C … T135°C Db
Ex ia IIIC T85°C ... T135°C Da
NEPSI:
Ex e IIC T4 ... T6 Gb
Ex ia IIC T4 ... T6 Ga
Ex ib IIC T4 ... T6 Gb
Ex ic IIC T4 ... T6 Gc
Ex e ia IIC T4 ... T6 Gb
DIP A21 Ta85°C ... 135°C
Ex iaD 20 Ta 85°C ... 135°C
EAC Ex:
1 Ex eb IIC T6 … T4 Gb
0 Ex ia IIC T6 … T4 Ga
Ex tb IIIC T85°C … T135°C Db