Document of Conformity

ManualsBrandsWeidmueller ManualsBrass cable glands Ex d - Klippon® KUBKUB M20 BS O SC 2 G20S

SCHEDULE

EU-TYPE EXAMINATION CERTIFICATE Sira 05ATEX1288X

Issue 5

This certificate and its schedules may only be

reproduced in its entirety and without change

CSA Group Netherlands B.V.

Utrechseweg 310,

6812 AR, Arnhem Netherlands

DQD 544.11 Rev 2018-04-20 Page 8 of 9

ii. The recognition of the ‘standard’ entry threads associated with every gland type’s gland sizes, in

accordance with newly introduced generic bill of material drawing(s).

iii. To permit all gland types to be manufactured with a size larger than the ‘standard’ entry threads

listed within the product description.

iv. To recognise all gland types with the following alternate threaded entry threads complying with

the requirements of EN 50018:2000. Are intended to be used as replacement entry devices within

existing installations with equipment that have threaded entries no longer permitted by the

current edition of EN 60079-1.

 NPSM ANSI/ASME B1.20.1:1983

 BSPT BS21:1985 (ISO 7/1; BS EN 10226-1:2004 ‘standard threads’

 BSPP BS EN ISO 228-1 :2003; BS EN ISO 2228-2:2003 class A full form ‘external threads’

 PG DIN 40430:1971

 ET BS 31:1940 (1979) Table ‘B’

All alternative trade size thread forms are manufactured within the dimensional parameter of the

standard entry threads of the gland entry body, and relevant constructional compliance length and

engagement requirements in accordance with their product markings

v. To recognise the actual seal ‘material specification’ reference as a replacement for the seal

‘material supplier’.

vi. The brass materials of manufacture were updated and corrected.

vii. Following appropriate assessment to demonstrate compliance with the latest technical knowledge,

EN 60079-0:2012, EN 60079-1:2007, EN 60079-7:2007 and EN 60079-31:2009, were replaced by

EN 60079-0:2012/A11:2013, EN 60079-1:2014, EN 60079-7:2015, and EN 60079-31:2014. The

markings were updated, and a Specific Condition of Use was modified and amended to recognise

the new standard edition. In addition the description was modified to clarify the certified cable

gland types, the standard gland size ‘entry threads ’, and gland size range taking capabilities

lusive of changes carried out under this certificate variation.

14 DESCRIPTIVE DOCUMENTS

14.1 Drawings

Refer to Certificate Annexe.

14.2 Associated Sira Reports and Certificate History

Issue

Date

Report number

Comment

12 April 2006

R51A14293A

The release of prime certificate.

26 June 2009

R51A20139C

This Issue covers the following changes:

 All previously issued certification was rationalised

into a single certificate, Issue 1, Issue 0

referenced above is only intended to reflect the

history of the previous certification and has not

been issued as a document in this format.

 The rationalisation of the certificate in accordance

with that listed in section 14.3.

22 March 2012

R27074A/00

The introduction of Variation 3

26 March 2013

R27876A/00

The rationalisation of the certificate in accordance with

that listed in section 14.3.