Brochure/Catalogue
3.
Motor connections
This interface typically requires connections for the motor
voltage, internal temperature sensor and possibly the
mechanical brakes. Depending on the application, a con-
nection to an encoder or resolver may also be required.
Our hybrid motor connector needs only one plugging opera-
tion to simultaneously connect power, signals and cable
shielding. This helps you to save space on the circuit board
and on the housing’s exterior. The one-handed, auto-interlock
mechanism speeds up your installation and maintenance
procedures. It is easy to handle and interlocks automatically
– even in hard to reach installation positions.
We are currently the only manufacturer to provide special
PCB connectors for devices connected to IT-type power
grids.
PCB terminal blocks (in 10.16 mm, 12.7 mm and 15.0 mm
pitches with wire connections up to 50 mm²) offer non-
pluggable connectivity solutions. For panel feedthrough
bushings, we recommend using device feedthrough
terminals with 4 mm² to 95 mm² wire connections.
Convenient and standardised motor connections: hybrid motor plugs, soldered feedthrough terminals
and PCB terminals blocks
4.
Safety circuit
Safety switching devices (such as emergency-stop switches,
safety light curtains and door switches) communicate closely
with your drive controllers. They protect man and machine:
ensuring that connected drives can be stopped immediately
when required.
The BLF and BLZ OMNIMATE Signal connectors, in
5.08 mm pitch and with either screw or “PUSH IN” wire
connections, ensure reliable connections for signals.
The LM, LS and LSF PCB terminals, in 5.08 pitch,
provide a non-pluggable solution.
PCB terminals and connectors, in 5.08 pitch, with “PUSH IN” or screw wire connections