Brochure/Catalogue

Freedom of design in device development involves the goal of efciently
assembling printed circuit boards so as to ensure quality.
Our LSF-SMD family featuring “PUSH IN” direct connectivity supports
the requirements of fully-automatic surface installation. Let’s connect.
Maximum freedom with regard to PCB design calls for exible terminal solutions
that can also establish secure contacts with composite PCBs made from glass,
ceramic or aluminium.
With our new LSF-SMD family, we are satisfying demands for fully-automatic
PCB surface installation using the SMD soldering procedure. Two soldering pads
per pole provide a high level of mechanical stability according to IPC A 610 Class
2. A reliable connection is established without tools thanks to “PUSH IN” direct
connectivity.
The 3.50 mm, 5.00 mm and 7.50 mm pitches and the 90°, 135° and 180°
conductor outlet directions cover a multitude of device requirements and offer
high component density with a maximum connection cross-section of 1.5
mm². Use of the distortion-free insulating material LCP, which is resistant to
high temperatures and has a moisture level of MSL 1, enables a high level of
dimensional stability, thus guaranteeing co-planarity for the reow soldering
process without the need for a drying phase beforehand.
Your future lies in SMD assembly
OMNIMATE Signal LSF-SMD provides enormous scope for design
Efcient assembly
Automatic assembly is supported by the tape-
on-reel packaging in standard belt widths. Pick-
and-Place pads guarantee reliable attaching and
setting down.
Stable soldering connections
Featuring two soldering pads per pole, LSF-
SMD PCB terminals satisfy the most stringent
mechanical xing requirements without the
need for additional mounting anges.
Reliable processing
Use of the LCP insulating material means that
assembly can take place directly during the SMT
process without the need for pre-drying. There is
no risk of blisters forming.
More design freedom for design ideas
Drilled holes and feed-throughs on PCBs cost time, take up space and compromise the freedom of developers. Our wide SMD range featuring “PUSH IN”
direct connectivity is economical and opens up new design possibilities. For LED devices featuring an aluminium cooling element, for instance, where no
holes can be drilled.
SMD
Fast wire connection method
The proven “PUSH IN” direct connectivity
enables secure contacts up to 1.5 mm² without
the need for tools. Conductors can be released
simply and quickly by pressing the release
button.
4 5