User Documentation

-11-
No.PF※※-OMP0002-H
Summary of Product parts
Body
Name
Description
Display
1
See below.
Connector
Connector for electrical connections.
Lead wire with connector
Lead wire for power supply and outputs.
Piping port
For piping connections. Connected to the fluid inlet at IN and to the fluid outlet at OUT.
Body
The body of the product.
1: A protective tape is affixed to the display. Please remove it before use.
Display
Name
Description
LCD display
Displays the flow value, setting mode and error codes.
Indicator LED
Displays the output status of OUT1 and OUT2.
LED is ON (Orange) when the output is ON.
When the accumulated pulse output mode is selected, the LED will turn OFF.
button (UP)
2
Selects the mode and increases the ON/OFF set value.
Press this button to change to the peak display mode.
Button (SET)
Press this button to change the mode and to set a value.
Button (DOWN)
2
Selects the mode and decreases the ON/OFF set value.
Press this button to change to the bottom display mode.
Unit indicator
Indicates the unit currently selected.
Reference condition indicator
Indicates the reference condition selected. LED is ON (red) when standard condition is
selected.
2: When the reversed display is used, the function of the and buttons is reversed.