User Documentation

-23-
No.PF※※-OMP0002-H
<Operation>
Press the button continuously
to keep increasing the set value.
Press the button continuously
to keep decreasing the set value.
: The above example is for the 500 L/min type.
: For models with switch outputs for both OUT1 and OUT2, [P_2] or [n_2] will be displayed too. Set as above.
: For input of hysteresis, perform the settings referring to [F 1] Setting of OUT1 (page 28 to) and [F 2] Setting of OUT2 (page 36 to).
: When a mode other than hysteresis mode is selected, “Set value” of page 29 is displayed.
: Note that the set value and hysteresis are limited by each other.
: For more detailed settings, set each function in function selection mode (page 24).
1. Press the button once in measurement mode.
[P_1] or [n_1] and [the current set value] are displayed in turn.
2. Press the or button to change the set value.
The button is to increase and the button is to decrease the set value.
3. Press the button to complete the setting.
Return to measurement mode.