User Documentation

-45-
No.PF※※-OMP0002-H
■[F22] Setting of analogue output
This function is available when the model includes the analogue output.
The flow value corresponding to an analogue output voltage = 5 V or analogue output current = 20 mA can
be selected.
: When using a model without analogue outputs, this setting is not available and [---] will be displayed.
<Operation>
Press the button.
Select [oFF]. Select [on].
Press the button to set. Press the button to set.
Press the button to set.
[F22] Setting of analogue output completed.
Return to function selection mode.
: The above example is for the 500 L/min type.
Press the or button in function selection mode to display [F22].
[F22] and [FrE] are displayed in turn.
Set value
[F_H] and [the current set
value] are displayed in turn.
Use the and
buttons to enter the flow
value that will generate full
span analogue output
(5 V or 20 mA).
The entered flow value can
be in the range: 10% of the
maximum rated flow, to the
max. displayable range.
Setting of analogue output
[FrE] and [the current set value] are displayed in turn.
Press the or button to select.