User Documentation

-52-

No.PF※※-OMP0002-H

■[F98] Output check

The operation of the output can be checked by switching the output ON/OFF by pressing a button, without

the need for a flow of fluid.

Press the button.

: An increase or decrease in flow will have no effect on the output

while the output check is being performed.

Check of OUT1

[1oU] and [the current set value] are displayed

in turn.

Press the or button to select.

Changing the display between ON and OFF

using the or button also changes the

output status.

Select [ n].

Press the button to set.

Select [ F].

Press the button to set.

[F98] Setting of output check completed.

Return to function selection mode.

Press the or button in function selection mode to display [F98].

[F98] and [tES] are displayed in turn.

Output check

[tES] and [the current set value] are displayed in turn.

Press the or button to select.

Check of OUT2

[2oU] and [the current set value] are displayed

in turn.

OUT2 can be set using the same procedure as

OUT1.

For the analogue output type, 5 V or 20 mA is

output when [on], and 1 V or 4 mA is output

when [oFF].

Press the button.

(With OUT2)

Press the button.

(Without OUT2)