User Documentation

Settings
1435710000/01/05.13 31
Primary side current of CT CT-1
Set the primary side current of CT used.
Enter the primary side current of CT that is set at CT type setting.
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] 1 to 4000 (initial:5)
Increase
Decrease
Primary side current of using CT is 400 A: [400]
VT ratio VT
Select the voltage input method, input voltage directly or uses a voltage transformer
(VT: secondary side rating 110 V) and set VT ratio.
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] 1.00 to 600.00 (initial:1.00)
Increase
Decrease
Input directly without VT: [1.00]
Use VT: [1.01 to 600.00]
Note
When the input voltage is under 3 V (VT ratio = 1), [0.0] is displayed and no measurements are made.