User Documentation

Settings
1435710000/01/05.13 37
Auto-display AUTO DISP
This automatically changes the items of each integral value.
When the setting time elapses after key operation, the integral value is automatically changed.
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] 0 to 99 min. (initial:10)
Increase
Decrease
Do not change automatically: [0]
Change automatically after the setting time: [1 to 99]
Note
1) Any key operation during auto-display makes the display shift to instantaneous active power.
Display cycle DISP CYCLE
*It skips this item when [0] is set for auto-display.
Set each display cycle during auto-display.
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] 1 to 99 sec (initial:5)
Increase
Decrease
Change every 1 second: [1]
Note
1) Any key operation during auto-display makes the display shift to instantaneous active power.