User Documentation

Settings
38 1435710000/01/05.13
Temperature correction TEMP CORRE
The measured temperature can be corrected to display.
Press <ITEM/∆>, <SHIFT/∇> to make the setting.
[Set range] -100.0 to 100.0 (initial: 0.0)
Increase
Decrease
Reset all integral values RESET ALL
Integral power (active, reactive, apparent) can be reset once.
Press <ITEM/∆>, <SHIFT/∇> to select.
[Set list] YES, NO (initial: NO)
Reset all: [YES]
Do not reset: [NO]
Reset integral value 1 RESET 1
*It skips this item when [YES] is selected to reset all integral values.
Reset the integral power of 1CH/1-phase (active, reactive, apparent) and integral export power of
1CH/1-phase (active, reactive).
Press <ITEM/∆>, <SHIFT/∇> to select.
[Set list] YES, NO (initial: NO)
Reset: [YES]
Do not reset: [NO]