User Documentation

Communications
1435710000/01/05.13 75
Data register Name Unit Type of data Range R/W
DT05042
Export power conversion
value (2)
0.01 Unsigned 32bit 0 to 999999999 R
DT05043
DT05044
Export power conversion
value (3)
0.01 Unsigned 32bit 0 to 999999999 R
DT05045
DT05046
Total export power
conversion value
0.01 Unsigned 32bit 0 to 2999999997 R
DT05047
DT05090
Conversion value (1) 0.01 Unsigned 32bit 0 to 999999999 R
DT05091
DT05092
Conversion value (2) 0.01 Unsigned 32bit 0 to 999999999 R
DT05093
DT05094
Conversion value (3) 0.01 Unsigned 32bit 0 to 999999999 R
DT05095
DT05096
Total conversion value 0.01 Unsigned 32bit 0 to 2999999997 R
DT05097
* ’Range’ is not the measurement range, but refers to the data range.
Notes
1) R: Read
W: Write
2) Data register except specified is 0.
3) If each setting value is written during communication, it is stored to internal memory at the same time.
Frequently changing the setting therefore reduces the life of the memory. Try to avoid doing this.
4) Data should be within the data range when written.