User Documentation
Communications
1435710000/01/05.13 99
• Response from Slave (normal)
68H A0 A1 A2 A3 A4 A5 68H 94H 00H CS 16H
Write transmission address
◊ This writes the transmission address (device number). It is only available when the Master and Slave
ratio is 1:1.
◊ If the programming key is not pressed there will be no response.
• Command from Master; Control code 15H
68H AAH AAH AAH AAH AAH AAH 68H 15H 06H
⇒
continue
Transmission address (AAH fix) Control code
⇒
continue
A0 A1 A2 A3 A4 A5 CS 16H
Transmission address to write Slave
(Add 33H to transmission address value)
• Response from Slave (normal)
68H A0 A1 A2 A3 A4 A5 68H 95H 00H CS 16H
New transmission address
Note
1) No response when Slave is abnormal.