Brochure/Catalogue
B
B.38 2737920000
Solid-state relay, 3…33V DC/ 2A
Output versions, multi-voltage input
A1
A2
14 11
14
NO
COM
11
AC/DC Input
A2
A1
NC
12
Load side
Rated switching voltage 3...33 V DC
Continuous current 2 A
Inrush current 15 A / 10 ms
Contact type 1 NO contact (MOS-FET)
Voltage drop at max. load ≤ 120 mV
Leakage current < 10 µA
Short-circuit-proof / Protective circuit, load side No / Free-wheeling diode
General data
Ambient temperature (operational) -20 °C...60 °C
Storage temperature -40 °C...70 °C
Humidity 5-95% relative humidity, T
u
= 40°C, without condensation
Insulation coordinates
Rated voltage 300 V
Impulse withstand voltage 6 kV (1.2/50 µs)
Dielectric strength for control side - load side 2.5 kV
eff
Dielectric strength to mounting rail 4 kV
eff
/ 1 Min.
Clearance and creepage distances for control side - load side ≥ 5.5 mm
Overvoltage category III
Pollution degree 2
Dimensions PUSH IN connection
Screw connection
Clamping range (nominal / min. / max.) mm² 1.5 / 0.14 / 2.5
1.5 / 0.14 / 2.5
Depth x width x height mm 87.8 / 6.4 / 89.4
87.8 / 6.4 / 89.6
Note
Accessories and dimensional drawings: refer to the TERMSERIES Accessories page.
Further approvals and technical data can be found at catalog.weidmueller.com
Technical data
• Space saving, just 6.4 mm modular width
• 2 A DC Output current
• PUSH IN and screw connection
• Multi-voltage input: 24...230 V UC in one module
Ordering data
Control side
Rated control voltage
Nominal control current
Power rating
max. switching frequency (DC
control voltage)
max. switching frequency (AC
control voltage)
Status indicator
Protective circuit
Approvals
Ordering data
PUSH IN connection Type
Order No.
Screw connection Type
Order No.
Note
24…230 V UC ±10 %
11.0 mA at 24 V DC, 1.1 mA at
230 V DC, 19.0 mA at 24 V AC,
2.8 mA at 230 V AC
265 mW @ 24 V DC, 255 mW
@ 230 V DC, 455 mVA @ 24 V
AC, 645 mVA @ 230 V AC
3 Hz
3 Hz
Green LED
Rectifier
CE; EAC
24 V - 230 V UC
TOP 24-230VUC 24VDC2A ED2
2663080000
TOS 24-230VUC 24VDC2A ED2
2662920000
Universal range
TERMSERIES – solid-state relays