Brochure/Catalogue
Introduction
Card holders
Card holders are used for adapting Euro 19" format
(100 x 160 mm) cards to plug-in connectors acc. to
IEC603/DIN41612 and DIN41617.
Cardholders can be used in industrial applications when:
• Adapting several 19" cards: As well as saving on the cost
of a rack, accessibility is improved, because usually racks
are only accessible from behind.
• The PCB card is in a remote position, making it difcult to
install the cabling.
• It is necessary to extend legacy systems by adding more
electronic modules.
• There are processes where quick replacement of the
printed circuit and easy handling of connections is
important.
Card holders have the following individual components:
• Snap-t base and mechanism for securing the card
• Assembly plate and feet for direct assembly or for locking
on DIN rails
• Printed circuit board where the following features can
be identied:
– Plug-in connectors acc. IEC603/DIN41612 and
DIN41617
– Weidmüller terminals for screw connection
H
H.2 2690170000
Card holders