User Documentation

Introduction
14
5662300000/01/08.10
4.1 Symbol identification
DANGER!
Potentially lethal voltages.
The CE mark proves the compliance of
the product with the requirements of the
directives.
4.2 Types / article numbers
This User Manual covers the following product
types / article numbers
WAS6 TTA 8939670000
WAZ6 TTA 8939680000
WAS6 TTA EX 8964310000
WAZ6 TTA EX 8964320000
CBX100 USB 7940025031
CBX200 USB 8978580000
The only difference between the products is the
connection type. The WAS6 TTA and WAS6 TTA
EX has screw connectors. The WAZ6 TTA and
WAZ6 TTA EX has tension clamp connectors.
4.3 General description / appli-
cations / examples
WAVE TTA is an accurate and stable signal con-
verter / isolator / alarm generator for use in meas-
urement and control systems. In one model, a wide
variety of input / output range and type settings can
be configured, using a separate (CBX100 USB or
CBX200 USB) interface and (TTA Set) software.
The WAVE TTA can be powered from DC or AC
sources between 18 and 264 volts.
The primary characteristic of the WAVE TTA is its
versatility of input / output configurability. Hence
many of the standard functions performed by DIN
rail mounted conditioners can be done by the WAVE
TTA, such as
• Conversion (current to voltage, and vice versa)
• Isolation of temperature sensor and DC inputs
• Linearization of temperature sensor inputs
• Transmission of sensor signals over long dis-
tance
• Characterising signals from DC transmitters
• Process alarm generation
• Relay control between high and low values can
be done by the WAVE TTA.