User Documentation

4
ENGLISH
Stripping tool for PVC insulated cables
1 Adjusting the cutting depth
Slider for making ne adjustments to the
stripping blade when stripping wires with
different insulation thicknesses.
2 Wire stop mechanism
Variably adjustable wire stop mechanism
for setting the stripping length.
First press down and then adjust!
3 Stripping process
Insert wire in the middle and strip.
4 Cutting
a Cutting exible (stranded) and
solid-core wires.
No steel stranded wires!
b On-demand cut protection for
preventing unintentional cutting.
5 Partial stripping
a Partial stripping in the standard
position.
b Partial stripping in the partial-strip
position 1 (5 mm), 2 (3 mm).
c It is not possible to carry out partial
stripping!
6 Attaching and removing the grip
in order to adjust for hand size
a Remove the adapter grip.
b Snap on the adapter grip.
7 Labelling
Individualized labelling is possible with
the ESG-9-20 device markers.
Remove the marker and replace.
8 Adjusting
Additional adjustments are possible for
stripping tools of up to 16 mm
2
(AWG 6).
Please nd a note concerning the insulation
material from page 28