User Documentation

171273570000/00/02.11
5 Printing Operation
5.1 Printhead Protection
!
Attention!
Printhead damage caused by improper handling!
 Do not touch the heating elements of the printheads with the fingers or sharp objects.
 Ensure that the material is clean.
 Ensure that the material surfaces are smooth. Rough material act like emery paper and reduce the
service life of the printhead.
 Print with the lowest possible printhead temperature.
The printer is ready for operation when all connections have been made and labels and, if applicable, the transfer ribbon
have been loaded.
5.2 Identical Images on Both Sides
 Define the single material width as label width.
 Place the information.
 Activate in the printer driver menu General > Print Settings > Advanced Setup > Options the setting "top side
same as bottom".
or
 In the printer software M-Print PRO (on the provided CD) the contents of both pressure sides can be synchronized.
5.3 Suppressing Backfeed
i
Notice!
Feeding back the material to the lower printhead in the cut mode or between print jobs is not allowed.
To avoid the backfeed :
 In the printer driver menu General > Print Settings > Advanced Setup > Options the setting "ignore label
position" is permanently activated.