User Documentation
26 1273570000/00/02.11
8 Media
8.3 Reflex Mark Dimensions
Fig. 19 Reflex mark dimensions
Dim. Designation Dim. in mm
H Print zone height 5 - 1000
A Print zone distance > 2
V Feed length > 7
L Width of reflex mark > 5
M Height of reflex mark 3 - 10
X Distance mark - middle of media track
= Distance gap/reflective sensor - middle of media track
-53 - ±0
Y Sensor recognized virtual print zone front edge Front edge of mark
• Reflex marks must be on the back side of the material (liner).
• Material sensor for reflex marks on the top side on request.
• Specification is valid for black marks.
• Recognition of colored marks may fail. Preliminary tests are needed.
Table 10 Reflex mark dimensions
Feed direction