Brochure/Catalogue

C
C.132 2737920000
PSSR control unit
Monitoring of up to 5 consumers connected in parallel
Can be attached to the single-phase PSSRs
Error message feedback output
Undercurrent switching threshold: 0.84 x I
setting
Teach button on the module and external teach input
Technical data
Control side
Rated control voltage
Rated control current
Pull-in/drop-out voltage, typ.
Rated control voltage (external teach input)
Nominal control current (external teach input)
Supply
Voltage supply
Current consumption
Feedback output
Solid-state type
Nominal switching voltage
Continuous current
Undercurrent switching threshold
Current measurement range AC, min.
Current measurement range AC, max.
Switch-on delay
Switch-off delay
Control output to the PSSR
Nominal switching voltage
Solid-state type
Switch-on delay
Switch-off delay
General data
Ambient temperature (operational)
Storage temperature
Humidity
Current sensor hole diameter
Approvals
Standards
Insulation coordinates
Impulse withstand voltage
Clearance and creepage distances for control side - load side
Overvoltage category
Pollution degree
Dimensions
Clamping range (nominal / min. / max.) mm²
Depth x width x height mm
Note
Ordering data
Screw connection
Note
Accessories
Note
PSSR 1 PH CONTROL UNIT
power supply
input control
diagnostic ouput
external teach input
teach button
internal
logic
control output for PSSR
LED red
LED yellow
LED green
D
G
S
1
2
3
4
5
4…30 V DC
≤ 2.5 mA
2 V DC
4…30 V DC
≤ 2.5 mA
8…30 V DC
≤ 20 mA (feedback output unloaded), ≤ 120 mA (switched feedback
output max. loaded)
MOS-FET
8...30 V DC
0.1 A
0.84 x I
setting
2 A
40 A
≤ 100 ms
≤ 100 ms
8...30 V DC
Transistor
≤ 15 ms
≤ 16 ms
-40 °C...80 °C
-40 °C...125 °C
40...85 % (indoor) no condensation
9 mm
CE; EAC
EN 60947-4-3, EN 60950
III
2
Screw connection
1.5 / 0.15 / 2.5
65 / 25 / 112.3
Type Qty. Order No.
PSSR 1PH CONTROL UNIT 1 1406230000
Accessories and dimensioned drawings: refer to the Power Solid-state Relay
Accessories page.
Application range
Power – Power solid-state relays