Brochure/Catalogue
B
B.170 2737920000
MCZ R
1 CO contact AC/DC/UC coil
98&9$&
9$&
9
9
'&,QSXW
9
9
9
9
&LUFXLWGLDJUDP
Load side
Rated switching voltage / Continuous current 250 V AC / 6 A
Max. switching voltage, AC 250 V
Inrush current 6 A
Min. switching power 1 mA @ 24 V, 10 mA @ 10 V, 100 mA @ 5 V
Contact type 1 CO contact (AgSnO)
Mechanical service life 10 x 10
6
switching cycles
Max. switching frequency at rated load 0.1 Hz
General data
Ambient temperature (operational) -25 °C...50 °C
Storage temperature -40 °C...60 °C
Humidity 5 - 93% rel. humidity, Tu = 40°C, no condensation
Approvals CE; CSA; cURus; DNVGL; EAC
Insulation coordinates
Rated voltage 300 V
Impulse withstand voltage 4 kV (1.2/50 µs)
Dielectric strength, Input/Output 4 kV
eff
/ 1 s
Dielectric strength of neighbouring contacts
Dielectric strength to mounting rail 4 kV
eff
/ 1 Min.
Creepage and clearance distance input – output ≥ 5.5 mm
Overvoltage category III
Pollution degree 2
Dimensions Tension-clamp connection
Clamping range (nominal / min. / max.) mm² 1.5 / 0.5 / 1.5
Depth x width x height mm 63.2 / 6.1 / 91
Note
End plate AP MCZ 1.5: 8389030000
Accessories and dimensional drawings: refer to the MCZ Accessories page.
'HUDWLQJFXUYH
LQDURZZLWKRXWVSDFLQJRQWHUPLQDOUDLO
LQDURZZLWKPPVSDFLQJRQWHUPLQDOUDLO
89'&
,
/
$'&
/LPLWFXUYH
3URKLELWHGUDQJH
/RDGFXUUHQW>$@
$PELHQWWHPSHUDWXUH>&@
Applications
Technical data
The module can be used as a universal interface between
the controller and the actuator to switch small and medium-sized
loads
• Reduced installation and commissioning costs, thanks to the use of
the proven tension-spring connection system
• Pluggable cross-connection at input and output minimises the wiring
workload.
• Width 6mm
• For mounting on TS 35
Universal range
MCZ SERIES – relay modules