Brochure/Catalogue

C
C.192737920000
Solid-state relay, 3...33 V DC / 2 A actuator versions
$
$

'&,QSXW
$
$

12
&20

&&
Load side
Rated switching voltage 3...33 V DC
Continuous current 2 A
Inrush current 15 A / 10 ms
Contact type 1 NO contact (MOS-FET)
Voltage drop at max. load ≤ 120 mV
Leakage current < 10 µA
Short-circuit-proof / Protective circuit, load side No / Free-wheeling diode
General data
Ambient temperature (operational) -20 °C...60 °C
Storage temperature -40 °C...70 °C
Humidity 5-95% relative humidity, T
u
= 40°C, without condensation
Approvals CE; cULus; DNVGL; EAC
Insulation coordinates
Rated voltage 300 V
Impulse withstand voltage 6 kV (1.2/50 µs)
Dielectric strength for control side - load side 2.5 kV
eff
Dielectric strength to mounting rail 4 kV
eff
/ 1 Min.
Clearance and creepage distances for control side - load side ≥ 5.5 mm
Overvoltage category III
Pollution degree 2
Dimensions PUSH IN connection
Screw connection
Clamping range (nominal / min. / max.) mm² 1.5 / 0.14 / 2.5
1.5 / 0.14 / 2.5
Depth x width x height mm 87.8 / 6.4 / 89.4
87.8 / 6.4 / 89.6
Note
Accessories and dimensional drawings: refer to the TERMSERIES Accessories page.
Further approvals and technical data can be found at catalog.weidmueller.com
Technical data
Space-saving, only 6.4 mm wide
AgNi contact
PUSH IN and screw connection
24 V DC actuator version:
Bridgeable, potential-free connection in the output (CC)
Ordering data
Control side
Rated control voltage
Nominal control current
Power rating
max. switching frequency (DC
control voltage)
max. switching frequency (AC
control voltage)
Status indicator
Protective circuit
Ordering data
PUSH IN connection Type
Order No.
Screw connection Type
Order No.
Note
24 V DC ±20 %
11.5 mA DC (±10 %)
280 mW
300 Hz
Green LED
Free-wheeling diode, Reverse
polarity protection
24 V DC
TOP 24VDC ACT
2618750000
TOS 24VDC ACT
1391680000
Application range
Special loads – TERMSERIES