User Documentation

Information
12 00/07.12
2. Information
The mounting-rail cutting and punching device has
been specially designed for processing DIN mount-
ing rails.
2.1 TSDL
t = thickness of material
TS 35/7.5 mm to EN 50022; t = 1.0 mm
TS 35/15 mm to EN 50022; t = 1.5 mm
TS 32 mm to EN 50035; t = 1.5 mm
TS 15/5.5 mm to EN 50045; t = 1.0 mm
Copper earth bars 10 mm x 3 mm
The mounting-rail cutting and punching device can
process only those types of mounting rails, which
are made of steel, described above.
The mounting-rail cutting and punching device can
punch diagonal and longitudinal holes in mounting
rails, which it can also cut to length (12x 6.4 mm di-
agonal and longitudinal holes).
2.2 TSD 35
t = thickness of material
TS 35/7.5 mm to EN 50022; t = 1.0 mm
TS 35/15 mm to EN 50022; t = 1.5 mm
The mounting rail cutters can only be used on the
steel rail types described above.
3. Technical data
3.1 TSDL
Technical data
Length: 270 mm
Width: 205 mm
Height:
(without longitudinal
stop, without lever)
200 mm
Longitudinal stop: 1000 mm
Lever: 1000 mm
Total weight: 19 kg
3.2 TSD 35
Technical data
Length: 142 mm
Width: 110 mm
Height:
(without longitudinal
stop, without lever)
200 mm
Longitudinal stop: 1000 mm
Lever: 1000 mm
Total weight: 11,4 kg