User Documentation

Fehler! Verweisquelle konnte nicht gefunden werden.

4 / 11

1. Warning and disclaimer

Warning

Controls may fail in unsafe operating conditions, causing uncontrolled operation of the controlled devices.

Such hazardous events can result in death and / or serious injury and / or property damage. Therefore,

there must be provide safety equipment/ electrical safety design or other redundant safety features that

are independent from the automation system.

Disclaimer

This Example / Application Note does not relieve you of the obligation to handle it safely during use,

installation, operation and maintenance. Each user is responsible for the correct operation of his control

system.

By using this program example / application note prepared by Weidmüller, you accept that Weidmüller

cannot be held liable for any damage to property and / or personal injury that may occur because of the

use.

Note

The application examples do not represent customer-specific solutions, they are simply intended to help

for typical tasks. The user is responsible for the proper operation of the described products. This

application example does not relieve you of the obligation of safe use, installation, operation and

maintenance. Application examples are not binding and do not claim to be complete in terms of

configuration as well as any contingencies.

By using this Application Example, you acknowledge that we cannot be held liable for any damages

beyond the described liability regime. We reserve the right to make changes to this sample application at

any time without notice.

In case of discrepancies between the proposals in the application example and other Weidmüller

publications, like manuals, such contents always have more priority to the examples.

We assume no liability for the information contained in this document. Our liability, for whatever legal

reason, for damages caused by the use of the examples, instructions, programs, project planning and

performance data, etc. described in this application example is excluded.

Security notes

In order to protect equipment, systems, machines and networks against cyber threats, it is necessary to

implement (and maintain) a complete state-of-the-art industrial security concept. The customer is

responsible for preventing unauthorized access to his equipment, systems, machines and networks.

Systems, machines and components should only be connected to the corporate network or the Internet if

necessary and appropriate safeguards (such as firewalls and network segmentation) have been taken.