User Documentation

Fehler! Verweisquelle konnte nicht gefunden werden.

6 / 11

5. Create Target

To create a target and to install it on your u-control you first need an empty micro SD card and

insert it into your computer. Then follow the next steps:

1. Start u-create studio and create a new project or open an existing project

2. Find Project in your toolbar and click Create Target

3. Select destination path

(the inserted SD card may need to be prepared for the process)

4. Select u-create_PROCON-WEB_RT_ES_6.4.0.161beta_arm in Optional

Packages list

5. Change network settings if necessary

6. Create target (this will take several minutes)

Note

The create target process will create a bootable SD card. This process may need administrator

rights. If an error occurs during the create target process, please close u-create studio and

execute again with administrator rights.

When create target process was finished successfully insert micro SD card into u-control and

reboot the device. Orange flashing RUN led indicates the installation process. When installation

is finished successfully RUN led is constantly green. Remove SD card from u-control.