Approval/Certificate/Document of Conformity

Job Id:
262.1
-
021947
-
4
Certificate No: TAA000016R
Revision No: 4
Form code: TA 251 Revision: 2016-12
www.dnvgl.com
Page 7 of 7
Schematic UR20 PCBA UR20 FB ZYN ETHER (Drawing no. 3 59294, issue 2, 08.08.2016)
Schematic UR20 PCBA UR20 PF FBC GL (Drawing no. 3 62639, issue 3, 05.09.2017)
Schematic UR20 PCBA UR20 CTRL Z010 PHY (Drawing no. 3 62640, issue 1, 08.06.2016)
Schematic UR20 PCBA UR20 FB PN IRT (Drawing no. 3 55805, issue 2, 14.02.2017)
Schematic UR20 PCBA UR20 CTRL ERTEC (Drawing no. 3 60998, issue 1, 16.01.2017)
Drawing no. 3 62318 UR20-FBC-PL (Issue 01 / 31.01.2017)
Drawing no. 3 55131 UR20-FBC-PN-IRT-V2 (Issue 00 / 29.08.2018)
Drawing no. 3 54207 (issue 05 / 08.08.2016)
Software release Process Description Document A393 (Version 1.0 / 27.10.2016)
UR20_Versionfile_20180529
Type Approval Assessment Report Detmold (05.12.2016)
Type Approval Assessment Report Greifswald (13.10.2016)
Type Approval Assessment Report Rattenberg (20.10.2016)
Type Approval Assessment Report Magdeburg (16.04.2018)
Type Approval Assessment Report Magdeburg (2020-06-10)
Tests carried out
Applicable tests according to Class Guideline DNVGL-CG-0339, Edition November 2016.
Applicable tests for protected equipment according to IEC 60945, 4
th
edition (2002)
(Applicaton/Limitation to be observed)
Marking of product
The products to be marked with:
• manufacturer name
• part name / part no.
• serial no
• hardware version.
Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the type are
complied with, and that no alterations are made to the product design or choice of systems, software
versions, components and/or materials.
The main elements of the assessment are:
• Ensure that type approved documentation is available
• Inspection of factory samples, selected at random from the production line (where practicable)
• Review of production and inspection routines, including test records from product sample tests and
control routines
• Ensuring that systems, software versions, components and/or materials used comply with type
approved documents and/or referenced system, software, component and material specifications
• Review of possible changes in design of systems, software versions, components, materials and/or
performance, and make sure that such changes do not affect the type approval given
• Ensuring traceability between manufacturer’s product type marking and the type approval certificate
Periodical assessment is to be performed at least every second year and at renewal of this certificate.
END OF CERTIFICATE