User Documentation

Setting PROFIsafe on Siemens PLC with TIA Portal
xxxxxx0000/01/05.2016 4
1. Install the Weidmüller CPD – Tool
The Weidmüller CPD – Tool is an embedded program for the calculation of the
check sum in STEP 7 or TIA Portal depending on the parameter set for the module
UR20-4DI-4DO-PN-FSPS or UR20-8DI-PN-FSPS
1) Unzip the file “Setup_xx.zip”
2) Start the program “setup.exe” and wait until the installation is finished