User Documentation
17u-remote web server manual2112220000/06/01.2021
▶ Open the coupler component view.
Coupler component view
Here you can:
– Access and change the coupler parameters
– Query diagnoses
– Query general information about the coupler
– Type in I&M data (Identification & Maintenance)
– Change the login data and set up password protection
(see section5.6).
– Reset any changes that have been made (Reset)
– Reset the coupler to factory settings
– Access the datasheet of the coupler (link Ordering data)
The coupler settings are only accessible when
force mode is not active.
The status data can be displayed at all time, re-
gardless of the state of the eld bus connection.
Setup changes can only be stored while the eld
bus is not active.
6.1 Displaying and changing parameters
▶ Open the coupler component view.
▶ Click Parameter.
The parameters are displayed.
For parameters that can be edited, you can enter the chang-
es in the entry elds or choose alternative settings from a
drop-down list.
Displaying and changing the coupler settings
▶ Enter the desired changes.
Each change is marked with a green symbol until it will be
applied. All changes will only be saved after you click Ap-
ply changes. All changes will be undone after you click
Restore.
▶ After making your changes, click Apply changes.
Changes will be transferred to the coupler, the green mark-
ings will be removed.
6 Coupler settings